Dotco 10L1082-36 Inline Grinder | 10-10 Series | 0.3 HP | 25,000 RPM | 1/4" Collet | Aluminum Housing | Rear Exhaust

When controlled deburring matters more than aggressive stock removal, the Dotco 10L1082-36 Inline Grinder gives technicians a compact, straight-body tool for carbide burr work, mounted wheel finishing, and close-detail cleanup. Its 0.3 HP motor and 25,000 RPM free speed provide a balanced cutting rate for small metal edges, casting cleanup, slot finishing, and die work, where excessive speed can make control harder. The 1/4" collet accepts compatible 1/4" shank rotary accessories, making this grinder a practical fit for toolrooms, maintenance benches, and fabrication repair stations.

Part of the Dotco 10-10 Series, the 10L1082-36 uses an aluminum housing to keep weight low while maintaining a rigid feel in the hand. Its rear exhaust routes discharge air away from the work surface, helping reduce chip disturbance during precision grinding. A lock-off lever adds a layer of start-up control when the tool is being positioned, carried, or fitted with a properly rated abrasive accessory.

Type: Inline Die Grinder | Series: 10-10 Series | Power: 0.3 HP (0.22 kW) | Free Speed: 25,000 RPM | Collet Size: 1/4" | Abrasive Capacity: 1/2" Carbide Burr, 1" Mounted Wheel | Housing: Aluminum | Exhaust: Rear | Throttle Type: Lock-Off Lever | Weight: 0.7 lb (0.32 kg) | Overall Length: 4.6" (117 mm) | Air Inlet: 1/4" NPT | Minimum Hose I.D.: 1/4" (6.4 mm) | Rated Air Pressure: 90 PSI (620 kPa)

Features:

• Inline die grinder layout supports straight-on control for deburring, blending, edge breaking, and small-area material removal.
• 0.3 HP pneumatic motor provides compact grinding power for routine metal finishing and touch-up work.
• 25,000 RPM free speed gives compatible burrs and mounted points a controlled cutting rate for detail work.
• 1/4" collet holds compatible 1/4" shank accessories for carbide burr and mounted wheel applications.
• Durable aluminum housing keeps the tool light while providing a solid body for regular shop use.
• Rear exhaust helps direct air away from the workpiece and supports overhose-ready setups where additional exhaust management is preferred.
• Lock-off lever helps reduce unintended starts during handling, accessory changes, and positioning.
• Standard equipment includes the applicable collet and collet wrenches.

Made in USA:

Applications:

• Die and mold maintenance — cleaning pockets, blending small contours, and removing flash with compatible carbide burrs.
• Machine shop deburring — breaking sharp edges, cleaning drilled holes, and finishing machined features after milling, turning, or drilling.
• Fabrication repair work — removing light burrs, smoothing brackets, and preparing small metal areas before assembly or coating.
• Industrial MRO — touching up housings, guards, slots, and repair parts during equipment service and rebuild work.
• Automotive and garage use — cleaning castings, ports, brackets, and small hardware when the accessory speed rating matches the tool.

FAQs:

• Q: How is the 10L1082-36 different from faster 10-10 Series models?
  A: The 10L1082-36 runs at 25,000 RPM, which provides a slightly more controlled cutting speed than higher-RPM versions in the same family. That can be useful for detailed deburring, mounted wheel work, and applications where accessory control is more important than maximum free speed.
• Q: What size accessories fit this Dotco grinder?
  A: This model uses a 1/4" collet for compatible 1/4" shank accessories. The listed abrasive capacity is 1/2" carbide burrs and 1" mounted wheels.
• Q: Why does rear exhaust matter on a die grinder?
  A: Rear exhaust sends discharge air toward the back of the tool instead of across the work surface. This helps keep chips and grinding dust from being blown directly into the area being finished.
• Q: Can I use any 1" mounted wheel with this grinder?
  A: No. The mounted wheel must be compatible with the tool and rated for at least 25,000 RPM. Always follow the abrasive manufacturer’s instructions for speed rating, mounting, wheel condition, and safe overhang.
• Q: Does this grinder include burrs or wheels?
  A: The standard equipment listed for this series includes the applicable collet and collet wrenches. Carbide burrs, mounted wheels, and other abrasives are selected separately based on the work material and finish requirement.

Looking for more information about Dotco Grinder Motor? Click here to view the Catalog.

Need help selecting the correct Dotco Grinder Motors for your application? Please call (800) 608-5210 or email info@intlairtool.com