Built for dual hydraulic hose storage in rescue systems, service vehicles, and high-pressure tool setups, the Coxreels 1275HPL-A-8 is a 1275HP Series rim rewind hose reel with 1/4" hose I.D. capacity, 135 ft hose length, and a 10,000 PSI maximum pressure rating. The dual hydraulic layout uses two high-pressure swivel inlets and low-profile outlet risers to help route paired hydraulic lines cleanly across the drum, reducing hose crossing and supporting a flatter wrap during rewind.
The 1275HPL-A-8 is supplied less hose, making it a practical choice when the buyer needs to install a specific hydraulic hose brand, length, fitting configuration, or replacement hose assembly. Its welded steel "A" frame, CNC-spun ribbed discs, permanently lubricated pillow block bearings, and CPC powder coat finish support reliable reel operation in hydraulic maintenance, mobile equipment, utility, fleet, and emergency-response environments where hose control and pressure rating are critical.
*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.
Type: Dual Hydraulic Hose Reel | Series: 1275HP Series | Model: 1275HPL-A-8 | Rewind Type: Rim Rewind / Hand Crank | Configuration: Less Hose | Hose I.D.: 1/4" | Hose O.D.: 1/2" | Hose Capacity: 135 ft | Max Pressure: 10,000 PSI | Hose Included: No | Swivel Inlets: Two 1/4" high pressure 90° full-flow melanized steel swivel inlets | Outlet Risers: M14 x 1.5 female | Swivel Seals: VITON | Ship Weight: 37 lbs | Overall Dimensions (W x H x L): 17.5" x 18.63" x 17.63" | Mounting Pattern (M x N): 11.44" x 10" | Base (X x Y): 13.38" x 15.38"
Features:
- Dual hydraulic reel configuration supports paired hydraulic hose runs for emergency rescue systems and other high-pressure hydraulic tools.
- Two high pressure 90° full-flow melanized steel 1/4" swivel inlets help maintain fluid routing while allowing the reel drum to rotate during rewind and pay-out.
- VITON swivel seals support compatibility with hydraulic service where the seal material must tolerate demanding fluid and pressure conditions.
- Two low profile M14 x 1.5 female outlet risers and open drum slot design help promote a non-crimping, flat, smooth hose wrap.
- One-piece, all CNC robotically welded 12-gauge steel "A" frame base provides a rigid mounting structure without relying on a bolted frame assembly.
- CNC-spun ribbed discs with rolled edges add strength while helping protect the hose path during use and rewind.
- Permanently lubricated, self-aligning pillow block bearings support smooth drum rotation with reduced bearing maintenance.
- CPC powder coat finish helps resist chips and rust in shop, vehicle, and equipment-service environments.
Made in USA: 
Applications:
- Emergency rescue hydraulic systems where paired high-pressure hose lines must be stored, deployed, and rewound together.
- Utility and fleet service trucks carrying hydraulic tools, rescue equipment, or specialty maintenance hose assemblies.
- Industrial maintenance shops using high-pressure hydraulic tools that require organized hose storage near service bays or work cells.
- Mobile equipment service operations supporting hydraulic cylinders, presses, jacks, and portable power units.
- Fire, safety, and municipal equipment builds where reel mounting space, hose capacity, and pressure rating must be planned before installation.
FAQs:
- Q: What does less hose mean on the 1275HPL-A-8?
A: It means the reel is supplied without hose installed. The buyer must provide compatible 1/4" I.D. hydraulic hose separately, matched to the reel capacity, pressure rating, fittings, and application requirements. - Q: Is the 1275HPL-A-8 for one hose or two hoses?
A: This is a dual hydraulic hose reel. It is built with two high-pressure swivel inlets and two outlet risers so paired hydraulic hose lines can be managed on the same reel. - Q: Can this reel be used for 10,000 PSI hydraulic service?
A: Yes, the reel is rated for up to 10,000 PSI. The installed hose, fittings, and connected hydraulic tools must also be rated for the same working pressure and fluid service. - Q: What is the difference between rim rewind and geared crank models?
A: A rim rewind reel is manually rotated from the reel rim, while a geared crank model uses a crank mechanism to rewind the hose. This SKU is listed as the 1275HPL-A-8 rim rewind / hand crank configuration; confirm the exact rewind style against your internal item setup before publishing. - Q: What should be checked before installing this reel?
A: Verify the mounting footprint, overall reel dimensions, hose O.D., hose bend radius, fitting style, pressure rating, and available clearance for rewind and hose pay-out.
| LESS HOSE | SIZE INDEX |
|||||||
|---|---|---|---|---|---|---|---|---|
| LESS HOSE SKU | DESCRIPTION | INLET | OUTLET | CAPACITY 1/4" I.D. |
CAPACITY 3/8" I.D. |
PSI | APRX. LBS |
|
|
1125HP SERIES10,000 psi - two 1/4" 90° inlets. These reels are an essential component to operate hydraulic tools requiring 10,000 psi can be easily managed safely for efficient use in emergency situations.
|
||||||||
| 1275HPL-A-8 | Rim Rewind | 1/4" | 1/2" | 135' | 85' | 10,000* | 37 | 3 |
| 1275HPL-A-8-C | Geared Crank | 1/4" | 1/2" | 135' | 85' | 10,000* | 43 | 3 |
| 1275HPL-A-8-A | Air Motor | 1/4" | 1/2" | 135' | 85' | 10,000* | 50 | 3 |
| 1275HPL-A-8-E | Electric Motor | 1/4" | 1/2" | 135' | 85' | 10,000* | 68 | 3 |
| 1275HPL-A-12 | Rim Rewind | 1/4" | 1/2" | 200' | 125' | 10,000* | 39 | 4 |
| 1275HPL-A-12-C | Geared Crank | 1/4" | 1/2" | 200' | 125' | 10,000* | 45 | 4 |
| 1275HPL-A-12-A | Air Motor | 1/4" | 1/2" | 200' | 125' | 10,000* | 52 | 4 |
| 1275HPL-A-12-E | Electric Motor | 1/4" | 1/2" | 200' | 125' | 10,000* | 70 | 4 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
