Built for high-pressure dual hydraulic hose management, the Coxreels 1275HPL-A-12-A 1275HP Series hose reel provides 1/4" I.D. hose capacity up to 200 ft with a 10,000 PSI maximum pressure rating. This reel is configured for dual hydraulic emergency rescue systems and other high-pressure hydraulic tools where two hose lines must pay out and rewind together without crossing, kinking, or stacking unevenly on the drum.
The compressed air motor rewind configuration uses direct gear drive retraction, meaning the reel rewinds by gear engagement rather than a chain drive. Two high-pressure 90° full-flow melanized steel 1/4" swivel inlets with VITON seals support demanding hydraulic service, while the low-profile outlet risers and open drum slot help guide hose into a flatter, smoother wrap during rewind.
*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.
Type: Dual Hydraulic Motorized Hose Reel | Series: 1275HP Series | Model: 1275HPL-A-12-A | Rewind: Compressed Air Motor | Configuration: Less Hose | Hose I.D.: 1/4" | Hose O.D.: 1/2" | Hose Capacity: 200 ft | Max Pressure: 10,000 PSI | Outlet Option: A, -4 JIC Male | Swivel Inlets: Two 90° full-flow melanized steel 1/4" inlets | Seal Material: VITON | Ship Weight: 52 lbs
Features:
- Dual hydraulic reel layout supports paired hydraulic hose applications where two lines need to travel and rewind together.
- Rated for high-pressure hydraulic service up to 10,000 PSI when used with compatible hose and system components.
- Two high-pressure 90° full-flow melanized steel 1/4" swivel inlets help maintain fluid flow while the reel rotates.
- VITON swivel seals provide chemical and oil resistance for compatible hydraulic service environments.
- Two low-profile outlet risers and open drum slot design help reduce hose crimping and promote a flatter hose wrap.
- One-piece, all welded steel A frame construction provides a rigid mounting base without a bolted frame joint.
- Permanently lubricated, self-aligning pillow block bearings support smooth reel rotation with reduced bearing maintenance.
- Direct gear drive air motor rewind eliminates chain drive components on this motorized model.
Made in USA: 
Applications:
- Emergency rescue hydraulic systems - managing paired hydraulic tool hoses used with rescue cutters, spreaders, rams, and related equipment where clean deployment matters.
- High-pressure hydraulic tool stations - keeping dual hose runs organized at work cells, service bays, or mobile hydraulic setups.
- Industrial MRO and maintenance - storing long hydraulic hose lengths where manual handling can create hose damage, trip hazards, or slow tool changeover.
- Fleet and utility service vehicles - mounting a compact, motorized dual hose reel for controlled hose storage on trucks, trailers, or field-service platforms.
- Hydraulic repair and testing areas - handling two-line hydraulic circuits where pressure rating, hose capacity, and swivel compatibility must be checked before installation.
FAQs:
- Q: What does less hose mean on the 1275HPL-A-12-A?
A: It means the reel is supplied without hose installed. The buyer must provide compatible 1/4" I.D., 1/2" O.D. hydraulic hose separately and verify that the hose, fittings, and system pressure are suitable for the application. - Q: Is this a hand crank reel or an air motor rewind reel?
A: The 1275HPL-A-12-A is an air motor rewind model. Coxreels also offers hand crank versions in the 1275HP Series, but the -A suffix on this SKU corresponds to the compressed air motor rewind configuration. - Q: What is the A outlet option?
A: The A outlet option is -4 JIC Male. Confirm the hose end fittings and hydraulic circuit requirements before ordering so the reel outlets match the system. - Q: Can this reel be used for ordinary shop air hose?
A: This model is built for dual hydraulic applications, not general shop air hose storage. For compressed air service, choose a reel series specifically rated and configured for air hose. - Q: Why does the dual hydraulic reel use low-profile outlet risers?
A: Low-profile outlet risers help guide the two hose lines onto the drum with less crimping and a smoother wrap, which is especially important when storing long paired hose runs.
| LESS HOSE | SIZE INDEX |
|||||||
|---|---|---|---|---|---|---|---|---|
| LESS HOSE SKU | DESCRIPTION | INLET | OUTLET | CAPACITY 1/4" I.D. |
CAPACITY 3/8" I.D. |
PSI | APRX. LBS |
|
|
1125HP SERIES10,000 psi - two 1/4" 90° inlets. These reels are an essential component to operate hydraulic tools requiring 10,000 psi can be easily managed safely for efficient use in emergency situations.
|
||||||||
| 1275HPL-A-8 | Rim Rewind | 1/4" | 1/2" | 135' | 85' | 10,000* | 37 | 3 |
| 1275HPL-A-8-C | Geared Crank | 1/4" | 1/2" | 135' | 85' | 10,000* | 43 | 3 |
| 1275HPL-A-8-A | Air Motor | 1/4" | 1/2" | 135' | 85' | 10,000* | 50 | 3 |
| 1275HPL-A-8-E | Electric Motor | 1/4" | 1/2" | 135' | 85' | 10,000* | 68 | 3 |
| 1275HPL-A-12 | Rim Rewind | 1/4" | 1/2" | 200' | 125' | 10,000* | 39 | 4 |
| 1275HPL-A-12-C | Geared Crank | 1/4" | 1/2" | 200' | 125' | 10,000* | 45 | 4 |
| 1275HPL-A-12-A | Air Motor | 1/4" | 1/2" | 200' | 125' | 10,000* | 52 | 4 |
| 1275HPL-A-12-E | Electric Motor | 1/4" | 1/2" | 200' | 125' | 10,000* | 70 | 4 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
