Built for paired hydraulic hose management in rescue systems, service vehicles, and high-pressure tool setups, the Coxreels 1275HPL-A-8-C is a 1275HP Series dual hydraulic hose reel with a bevel geared hand crank rewind, 1/4" hose I.D. capacity, 135 ft hose length, and a 10,000 PSI maximum pressure rating. The geared crank rewind gives the user more controlled manual hose retrieval than a rim rewind reel, which is useful when handling long, high-pressure hydraulic hose assemblies.
This reel is supplied less hose, allowing the buyer to install hose assemblies matched to the tool, fitting style, fluid service, and pressure requirements of the application. The 1275HPL-A-8-C uses two high-pressure 90° full-flow melanized steel swivel inlets, VITON swivel seals, and two low-profile outlet risers to support paired hydraulic lines while helping the hose wrap flat across the drum during rewind.
*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.
Type: Dual Hydraulic Hose Reel | Series: 1275HP Series | Model: 1275HPL-A-8-C | Rewind Type: Bevel Geared Hand Crank | Configuration: Less Hose | Hose I.D.: 1/4" | Hose O.D.: 1/2" | Hose Capacity: 135 ft | Max Pressure: 10,000 PSI | Outlet Option: A, -4 JIC Male | Swivel Inlets: Two 1/4" high pressure 90° full-flow melanized steel swivel inlets | Swivel Seals: VITON | Overall Dimensions (W x H x L): 17.5" x 18.63" x 17.63" | Mounting Pattern (M x N): 11.44" x 10" | Base (X x Y): 13.38" x 15.38"
Features:
- Bevel geared hand crank rewind provides controlled manual retrieval for paired hydraulic hose assemblies.
- Dual hydraulic configuration supports emergency rescue systems and other high-pressure hydraulic tools requiring two hose lines.
- Two high pressure 90° full-flow melanized steel 1/4" swivel inlets help maintain fluid flow while the reel rotates during pay-out and rewind.
- VITON swivel seals support hydraulic service where seal compatibility and pressure resistance are important.
- Two low profile outlet risers and open drum slot design help create a flat, smooth hose wrap and reduce hose crimping during rewind.
- One-piece, all welded steel "A" frame base provides a rigid mounting structure without a bolted frame assembly.
- CNC-spun ribbed discs with rolled edges add strength while helping protect hose edges during use.
- Permanently lubricated, self-aligning pillow block bearings support smooth drum rotation with reduced bearing maintenance.
Made in USA: 
Applications:
- Emergency rescue hydraulic systems where paired hose lines must deploy and rewind together from a vehicle or equipment compartment.
- Fire, safety, and municipal equipment builds requiring organized storage for high-pressure hydraulic tool hoses.
- Fleet and utility service trucks carrying hydraulic rescue tools, portable power units, or specialty hydraulic equipment.
- Industrial MRO areas where hose control, pressure rating, and fixed reel mounting are important for safe hydraulic tool operation.
- Mobile equipment service operations supporting hydraulic jacks, cylinders, presses, and related high-pressure service tools.
FAQs:
- Q: What does less hose mean on the 1275HPL-A-8-C?
A: It means the reel is supplied without hose installed. The buyer must provide compatible 1/4" I.D. hydraulic hose assemblies separately and verify that the hose, fittings, and connected tools are rated for the application. - Q: What does the -C suffix mean on this Coxreels model?
A: On this 1275HP Series configuration, the -C suffix identifies the bevel geared hand crank rewind option. This differs from rim rewind and motorized versions in the same family. - Q: Is this reel built for one hydraulic hose or two?
A: This is a dual hydraulic hose reel. It uses two swivel inlets and two outlet risers so paired hydraulic lines can be stored and managed on the same reel. - Q: Can this reel be used at 10,000 PSI?
A: Yes, the reel is rated for up to 10,000 PSI. The installed hose assemblies, fittings, adapters, and hydraulic tools must also meet or exceed the required working pressure. - Q: What outlet configuration does the A option indicate?
A: The A outlet option indicates -4 JIC Male outlets. Confirm that this fitting style matches the hose assemblies and hydraulic equipment being connected before installation.
| LESS HOSE | SIZE INDEX |
|||||||
|---|---|---|---|---|---|---|---|---|
| LESS HOSE SKU | DESCRIPTION | INLET | OUTLET | CAPACITY 1/4" I.D. |
CAPACITY 3/8" I.D. |
PSI | APRX. LBS |
|
|
1125HP SERIES10,000 psi - two 1/4" 90° inlets. These reels are an essential component to operate hydraulic tools requiring 10,000 psi can be easily managed safely for efficient use in emergency situations.
|
||||||||
| 1275HPL-A-8 | Rim Rewind | 1/4" | 1/2" | 135' | 85' | 10,000* | 37 | 3 |
| 1275HPL-A-8-C | Geared Crank | 1/4" | 1/2" | 135' | 85' | 10,000* | 43 | 3 |
| 1275HPL-A-8-A | Air Motor | 1/4" | 1/2" | 135' | 85' | 10,000* | 50 | 3 |
| 1275HPL-A-8-E | Electric Motor | 1/4" | 1/2" | 135' | 85' | 10,000* | 68 | 3 |
| 1275HPL-A-12 | Rim Rewind | 1/4" | 1/2" | 200' | 125' | 10,000* | 39 | 4 |
| 1275HPL-A-12-C | Geared Crank | 1/4" | 1/2" | 200' | 125' | 10,000* | 45 | 4 |
| 1275HPL-A-12-A | Air Motor | 1/4" | 1/2" | 200' | 125' | 10,000* | 52 | 4 |
| 1275HPL-A-12-E | Electric Motor | 1/4" | 1/2" | 200' | 125' | 10,000* | 70 | 4 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
