When long paired hose runs need powered retrieval from hydraulic equipment, the Coxreels 1275-4-150-H provides a dual hose reel platform with a hydraulic motor rewind. This 1275 Series reel is configured for 1/2" I.D. hose with up to 150 ft hose capacity and a 3000 PSI maximum pressure rating, giving maintenance crews, service-truck builders, and equipment operators a way to manage two compatible medium-pressure lines from one reel location. The hydraulic rewind helps reduce hand-cranking on longer hose lengths, while the dual hose layout keeps matched lines organized during payout, use, and storage.
The 1275 Series uses two external fluid paths, with a swivel inlet on each side of the reel and two low-profile outlet risers for cleaner paired hose routing. Its open drum slot helps support a flatter hose wrap and reduces crimping during rewind, while the all-welded steel 'A' frame gives the reel a rigid base for fixed installation. For hydraulic service setups, mobile repair rigs, and industrial MRO areas, this configuration helps protect long hose runs and keeps work areas better organized between jobs.
Type: Dual Hose Hydraulic Motor Rewind Reel | Series: 1275 Series | Model: 1275-4-150-H | Configuration: Less Hose | Rewind Type: Hydraulic Motor | Hose I.D.: 1/2" | Hose O.D.: 7/8" | Hose Capacity: 150 ft | Included Hose: No | Max Pressure: 3000 PSI | Ship Weight: 74 lbs | Overall Dimensions: 29.88" W x 19.13" H x 17.63" L | Mounting Pattern: 21.44" M x 10" N | Base: 23.38" X x 16" Y
Features:
- Dual hose reel configuration manages two hose runs on one reel for paired-line applications and cleaner hose storage.
- Hydraulic motor rewind supports powered retrieval where a hydraulic drive source is preferred over manual rewind.
- Two external fluid paths with machined-from-solid-brass 90° full-flow NPT swivel inlets provide separate routing for each hose line.
- Nitrile swivel seals and Teflon-supported O-ring seals help maintain sealing performance in compatible medium-pressure service.
- Two low-profile outlet risers and an open drum slot help reduce hose crimping while supporting a flatter, more even hose wrap.
- One-piece all-welded steel 'A' frame construction gives the reel a rigid mounting platform for shop, plant, or vehicle installation.
- Permanently lubricated, self-aligning pillow block bearings support smooth reel rotation during hose payout and rewind.
- CNC spun discs with ribbed construction and rolled edges add strength while helping protect hose edges during operation.
Made in USA: 
Applications:
- Mobile hydraulic service trucks where paired hoses need organized storage and hydraulic-powered rewind.
- Equipment maintenance and repair areas managing long dual hose runs for compatible medium-pressure systems.
- Industrial MRO stations where hose control helps reduce floor clutter, hose wear, and handling time.
- Fleet and heavy equipment support operations that require two hoses to be deployed and retracted from the same reel location.
- Shop or plant installations where 1/2" hose capacity, 150 ft reach, and 3000 PSI reel rating match the system requirements.
FAQs:
- Q: What does 'less hose' mean on the Coxreels 1275-4-150-H?
A: It means the reel is supplied without hose installed. The buyer must provide compatible 1/2" I.D. hose separately and verify hose outside diameter, pressure rating, fittings, and media compatibility before installation. - Q: Is this reel made for two hoses?
A: Yes. The 1275-4-150-H is a dual hose reel with two fluid paths, two swivel inlets, and two outlet risers so paired hoses can be managed on one reel. - Q: Why choose hydraulic motor rewind?
A: Hydraulic motor rewind is useful where hydraulic power is already available, such as mobile equipment, service trucks, or hydraulic maintenance setups. It reduces manual hose retrieval on longer hose runs. - Q: Can this reel be used at 3000 PSI?
A: The reel is rated for 3000 PSI maximum pressure. The installed hose, couplings, fittings, and system media must also be rated and compatible for the same pressure and operating conditions. - Q: What should be checked before mounting this reel?
A: Confirm the 29.88" W x 19.13" H x 17.63" L overall dimensions, the 21.44" x 10" mounting pattern, and the 23.38" x 16" base footprint. The mounting surface must support the reel, installed hose weight, and pull forces during use.
| LESS HOSE | SIZE INDEX |
|||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| SKU | STANDARD CAP | OPTIONAL CAP. Reducer required |
INLET SWIVEL & OUTLET RISER |
PSI | APRX. LBS. |
|||||
| I.D. | O.D. | FT. | I.D. | O.D. | FT. | |||||
| 1275-4-150-A | 1/2" | 7/8" | 2/150 | 3/8" | 3/4" | 2/200 | 1/2" F NPT | 3,000 | 47 | 3 |
| 1275-4-150-C | 1/2" | 7/8" | 2/150 | 3/8" | 3/4" | 2/200 | 1/2" F NPT | 3,000 | 47 | 3 |
| 1275-4-150-E | 1/2" | 7/8" | 2/150 | 3/8" | 3/4" | 2/200 | 1/2" F NPT | 3,000 | 47 | 3 |
| 1275-4-150-EA | 1/2" | 7/8" | 2/150 | 3/8" | 3/4" | 2/200 | 1/2" F NPT | 3,000 | 47 | 3 |
| 1275-4-150-EB | 1/2" | 7/8" | 2/150 | 3/8" | 3/4" | 2/200 | 1/2" F NPT | 3,000 | 47 | 3 |
| 1275-4-150-ED | 1/2" | 7/8" | 2/150 | 3/8" | 3/4" | 2/200 | 1/2" F NPT | 3,000 | 47 | 3 |
| 1275-4-150-EF | 1/2" | 7/8" | 2/150 | 3/8" | 3/4" | 2/200 | 1/2" F NPT | 3,000 | 47 | 3 |
| 1275-4-150-EJ | 1/2" | 7/8" | 2/150 | 3/8" | 3/4" | 2/200 | 1/2" F NPT | 3,000 | 47 | 3 |
| 1275-4-150-H | 1/2" | 7/8" | 2/150 | 3/8" | 3/4" | 2/200 | 1/2" F NPT | 3,000 | 47 | 3 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
