Built for managing two high-pressure hose lines from one reel, the Coxreels 1275-4-150-EB Dual Hose Motor Rewind Reel helps keep long hose runs organized in service trucks, shop bays, equipment yards, and industrial maintenance areas. This 1275 Series model is configured with a 24V DC explosion proof electric motor rewind, making it useful where powered rewind is required and a low-voltage DC power source is preferred. With 1/2" hose I.D., 150 ft hose capacity, and a 3000 PSI maximum pressure rating, the reel is sized for medium-pressure dual-line applications where hose length, pressure rating, and clean rewind control all need to be considered before installation.
The 1275 Series 'Dual Hose' layout uses two swivel inlets and two low-profile outlet risers so paired hoses can feed and retract together while remaining independently plumbed. Its open drum slot helps create a flatter, smoother hose wrap, while the one-piece all-welded steel 'A' frame base provides a stable mounting structure for mobile or fixed installations.
Type: Dual Hose Electric Motor Rewind Reel | Series: 1275 Series | Model: 1275-4-150-EB | Configuration: Less Hose | Motor: 24V DC Explosion Proof | Hose I.D.: 1/2" | Hose O.D.: 7/8" | Hose Capacity: 150 ft | Hose Included: No | Max Pressure: 3000 PSI | Riser: 1/2" F NPT | Ship Weight: 68 lbs | Overall Dimensions: 32.63" W x 19.13" H x 17.63" L | Mounting Pattern: 21.44" M x 10" N | Base: 23.38" X x 16" Y
Features:
- Dual hose configuration supports two separate hose paths on a single reel for paired-line service.
- 24V DC explosion proof electric motor rewind helps retrieve long hose runs without manual cranking.
- Two external fluid paths with machined solid brass 90° full-flow NPT swivels support efficient flow and simplify seal access.
- Two low-profile outlet risers work with the open drum slot to help produce a non-crimping, flat, smooth hose wrap.
- Direct gear drive motor rewind design eliminates chain-drive maintenance and provides controlled powered retraction.
- One-piece, all-welded steel 'A' frame base adds rigidity for truck, bench, skid, or floor mounting.
- CNC-spun and ribbed discs with rolled edges strengthen the reel while helping protect hose during winding.
- Permanently lubricated, self-aligning pillow block bearings support smooth drum rotation during repeated payout and rewind cycles.
Made in USA: 
Applications:
- Mobile service trucks using 24V DC electrical systems for powered hose rewind in field maintenance work.
- Hydraulic and equipment service areas where two medium-pressure hose lines must be stored together but plumbed separately.
- Fleet maintenance shops handling paired hose runs for vehicle, machinery, and support equipment service.
- Industrial MRO installations where fixed reel mounting helps reduce hose clutter around work cells or maintenance bays.
- Utility skids, lube systems, and service platforms requiring dual hose management with 3000 PSI reel capacity.
FAQs:
- Q: What does 'less hose' mean for this Coxreels 1275 Series reel?
A: 'Less hose' means the reel is supplied without hose installed. The user must select compatible hose separately based on the reel's 1/2" hose I.D., 7/8" hose O.D., 150 ft capacity, 3000 PSI rating, and the fluid or service being used. - Q: What is the main difference between the 1275-4-150-EB and similar EA models?
A: The EB model uses a 24V DC explosion proof motor rewind configuration. EA models are typically selected for 115V AC explosion proof motor rewind applications, so the correct choice depends on the available power source and installation requirements. - Q: Can this reel be used on a service truck?
A: Yes, this reel can be used in mobile installations when the truck or service skid can support the reel size, mounting pattern, hose load, and 24V DC power requirement. Always verify the installation surface and hose routing before mounting. - Q: Is the 3000 PSI rating enough for hydraulic hose service?
A: It may be suitable for medium-pressure hydraulic applications when the system pressure stays within the reel rating. The hose, fittings, swivels, and connected equipment must all be rated for the same service conditions. - Q: Does 'explosion-proof' mean this reel can be used in any hazardous location?
A: No. The motor type must match the required hazardous-location classification for the jobsite. Confirm the specific Class, Division, Group, or Zone requirements before installing this reel in a regulated environment.
| LESS HOSE | SIZE INDEX |
|||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| SKU | STANDARD CAP | OPTIONAL CAP. Reducer required |
INLET SWIVEL & OUTLET RISER |
PSI | APRX. LBS. |
|||||
| I.D. | O.D. | FT. | I.D. | O.D. | FT. | |||||
| 1275-4-150-A | 1/2" | 7/8" | 2/150 | 3/8" | 3/4" | 2/200 | 1/2" F NPT | 3,000 | 47 | 3 |
| 1275-4-150-C | 1/2" | 7/8" | 2/150 | 3/8" | 3/4" | 2/200 | 1/2" F NPT | 3,000 | 47 | 3 |
| 1275-4-150-E | 1/2" | 7/8" | 2/150 | 3/8" | 3/4" | 2/200 | 1/2" F NPT | 3,000 | 47 | 3 |
| 1275-4-150-EA | 1/2" | 7/8" | 2/150 | 3/8" | 3/4" | 2/200 | 1/2" F NPT | 3,000 | 47 | 3 |
| 1275-4-150-EB | 1/2" | 7/8" | 2/150 | 3/8" | 3/4" | 2/200 | 1/2" F NPT | 3,000 | 47 | 3 |
| 1275-4-150-ED | 1/2" | 7/8" | 2/150 | 3/8" | 3/4" | 2/200 | 1/2" F NPT | 3,000 | 47 | 3 |
| 1275-4-150-EF | 1/2" | 7/8" | 2/150 | 3/8" | 3/4" | 2/200 | 1/2" F NPT | 3,000 | 47 | 3 |
| 1275-4-150-EJ | 1/2" | 7/8" | 2/150 | 3/8" | 3/4" | 2/200 | 1/2" F NPT | 3,000 | 47 | 3 |
| 1275-4-150-H | 1/2" | 7/8" | 2/150 | 3/8" | 3/4" | 2/200 | 1/2" F NPT | 3,000 | 47 | 3 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
