Built for dual-line hose management where powered rewind is preferred over manual cranking, the Coxreels 1275-4-150-ED Dual Hose Motor Rewind Reel gives service trucks, maintenance areas, and industrial work bays a clean way to store two hose runs on one reel. This 1275 Series model is configured as a DC electric motor rewind reel, helping retrieve long hose lengths more efficiently after service, transfer, or equipment support work. With 1/2" hose I.D., 150 ft hose capacity, and a 3000 PSI maximum pressure rating, it is suited for medium-pressure paired-line applications where hose capacity, pressure rating, and mounting layout must be checked before installation.
The 1275 Series 'Dual Hose' design uses two swivel inlets and two low-profile outlet risers, allowing two separate hose paths to pay out and rewind together while remaining independently plumbed. Its open drum slot helps create a flat, non-crimping hose wrap, while the direct gear drive motor system provides powered rotation without a chain drive.
Type: Dual Hose Electric Motor Rewind Reel | Series: 1275 Series | Model: 1275-4-150-ED | Configuration: Less Hose | Motor: DC Electric Non-Explosion Proof | Hose I.D.: 1/2" | Hose O.D.: 7/8" | Hose Capacity: 150 ft | Hose Included: No | Max Pressure: 3000 PSI | Riser: 1/2" F NPT | Ship Weight: 84 lbs | Overall Dimensions: 32.63" W x 19.13" H x 17.63" L | Mounting Pattern: 21.44" M x 10" N | Base: 23.38" X x 16" Y
Features:
- Dual hose configuration manages two separate hose lines on one reel for paired service or transfer applications.
- DC electric motor rewind reduces manual effort when retrieving long 150 ft hose runs.
- Two machined solid brass 90° full-flow NPT swivels support simple seal maintenance and hose installation without removing the reel from its mount.
- Two low-profile outlet risers work with the open drum slot to help provide a non-crimping, flat, smooth hose wrap.
- Direct gear drive provides smooth motorized rotation with no chain drive to maintain.
- One-piece, all CNC robotically welded 12 gauge steel 'A' frame base adds rigidity and places the mounting pattern directly in the steel base for easier installation and detachment.
- CNC robotically spun and ribbed discs with rolled edges add strength while helping protect hose during winding and payout.
- Permanently lubricated, self-aligning pillow block bearings support smooth reel rotation during repeated use.
Made in USA: 
Applications:
- Mobile service trucks and equipment skids using DC power for hose retrieval after field maintenance tasks.
- Hydraulic and medium-pressure service areas where two hose lines must be stored together but routed separately.
- Fleet maintenance shops managing paired hose runs for vehicle, machinery, and support equipment service.
- Industrial MRO work cells where powered rewind helps reduce loose hose around benches, bays, and machinery.
- Dual product delivery or service setups requiring 1/2" hose capacity and organized 150 ft hose storage.
FAQs:
- Q: What does 'less hose' mean on this Coxreels 1275 Series reel?
A: It means the reel is supplied without hose installed. The user must select compatible hose separately, matching the reel's 1/2" hose I.D., 7/8" hose O.D., 150 ft capacity, 3000 PSI pressure rating, fittings, and service media. - Q: Is this reel for one hose or two hoses?
A: This is a dual hose reel. It uses two swivel inlets and two outlet risers so two separate hose lines can be stored and rewound on the same reel. - Q: When should I choose a DC motor rewind reel?
A: A DC motor rewind reel is commonly selected for mobile service vehicles, equipment skids, and installations where DC power is available. Confirm voltage, wiring, circuit protection, and mounting requirements before installation. - Q: Can this reel be used in a hazardous location?
A: Do not use a non-explosion proof motor reel in a hazardous location unless the installation has been reviewed and approved by qualified personnel. Hazardous-location applications require the correct motor classification for the environment. - Q: What should be checked before choosing hose for this reel?
A: Confirm hose I.D., hose O.D., pressure rating, bend radius, fitting type, and media compatibility. The reel rating does not replace the need to verify that the hose and fittings are suitable for the system.
| LESS HOSE | SIZE INDEX |
|||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| SKU | STANDARD CAP | OPTIONAL CAP. Reducer required |
INLET SWIVEL & OUTLET RISER |
PSI | APRX. LBS. |
|||||
| I.D. | O.D. | FT. | I.D. | O.D. | FT. | |||||
| 1275-4-150-A | 1/2" | 7/8" | 2/150 | 3/8" | 3/4" | 2/200 | 1/2" F NPT | 3,000 | 47 | 3 |
| 1275-4-150-C | 1/2" | 7/8" | 2/150 | 3/8" | 3/4" | 2/200 | 1/2" F NPT | 3,000 | 47 | 3 |
| 1275-4-150-E | 1/2" | 7/8" | 2/150 | 3/8" | 3/4" | 2/200 | 1/2" F NPT | 3,000 | 47 | 3 |
| 1275-4-150-EA | 1/2" | 7/8" | 2/150 | 3/8" | 3/4" | 2/200 | 1/2" F NPT | 3,000 | 47 | 3 |
| 1275-4-150-EB | 1/2" | 7/8" | 2/150 | 3/8" | 3/4" | 2/200 | 1/2" F NPT | 3,000 | 47 | 3 |
| 1275-4-150-ED | 1/2" | 7/8" | 2/150 | 3/8" | 3/4" | 2/200 | 1/2" F NPT | 3,000 | 47 | 3 |
| 1275-4-150-EF | 1/2" | 7/8" | 2/150 | 3/8" | 3/4" | 2/200 | 1/2" F NPT | 3,000 | 47 | 3 |
| 1275-4-150-EJ | 1/2" | 7/8" | 2/150 | 3/8" | 3/4" | 2/200 | 1/2" F NPT | 3,000 | 47 | 3 |
| 1275-4-150-H | 1/2" | 7/8" | 2/150 | 3/8" | 3/4" | 2/200 | 1/2" F NPT | 3,000 | 47 | 3 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
