Cleco 88RSAPT-5C-3 Sliding Knob Reverse Pneumatic Screwdriver | Push and Trigger Start | 88 Series | 400 RPM | 1.2 - 13.2 (ft-lbs) Torque Range | 3/8" Square Drive

Built for controlled socket-driven fastening in production assembly, the Cleco 88RSAPT-5C-3 sliding knob reverse pneumatic screwdriver delivers a 1.2 - 13.2 ft-lbs torque range for small bolts, hex-head screws, and threaded fasteners that require repeatable torque rather than impact-style breakaway force. Its 400 RPM free speed gives operators a controlled rundown rate, helping seat fasteners consistently in mechanical assemblies, fixtures, and component build stations.

This 88 Series push and trigger start model uses Cleco’s Clecomatic clutch, a torque-controlled clutch system that helps stop the tool at the selected torque setting for repeatable fastening. The sliding knob reverse allows direction changes for removal, correction, and rework, while the 3/8" square drive accepts compatible sockets for assembly jobs that use hex-head fasteners instead of screwdriver bits.

Type: Pistol Grip Pneumatic Screwdriver | Series: Cleco 88 Series | Model: 88RSAPT-5C-3 | Clutch Type: Clecomatic Clutch | Start Type: Push and Trigger Start | Reverse Type: Sliding Knob Reverse | Drive: 3/8" Square Drive | Torque Range: 1.2 - 13.2 ft-lbs / 15 - 160 in-lbs / 1.7 - 18 Nm | Free Speed: 400 RPM | Length: 9.0" / 229 mm | Weight: 3.1 lbs / 1.4 kg | Air Inlet: 1/4" NPT | Minimum Hose I.D.: 1/4" | Air Consumption: 19 SCFM | Rated Air Pressure: 90 PSI / 620 kPa

Features:

• Clecomatic clutch supports repeatable torque-controlled fastening for production assembly environments.
• 1.2 - 13.2 ft-lbs torque range handles small bolts, hex-head screws, and moderate-torque threaded fasteners.
• 400 RPM free speed provides controlled rundown speed for fastening jobs where seating control matters more than maximum cycle speed.
• Push and trigger start configuration helps operators stabilize the socket and control the start of each fastening cycle.
• Sliding knob reverse allows quick direction changes for backing out fasteners, correcting misstarts, and completing rework.
• 3/8" square drive accepts compatible sockets for socket-driven assembly applications.
• Pistol grip format provides trigger control for bench, line, and fixture-based fastening stations.
• Standard equipment includes operating instructions and service manual, suspension bail, all torque springs required to meet the indicated torque range, and side handle 861006PT on models above 8 ft-lbs torque.

Applications:

• Mechanical assembly stations fasten small bolts, hex-head screws, brackets, covers, and component hardware.
• Automotive and off-road equipment component production, where controlled socket fastening helps protect threaded joints.
• Appliance and machinery manufacturing for repeatable rundown of panels, frames, guards, and subassemblies.
• Industrial repair benches used for removing and reinstalling socket-head or hex-head fasteners during service work.
• Fixture-based fastening operations, where push and trigger start control help operators align the socket before applying torque.

FAQs:

• Q: What torque range does the Cleco 88RSAPT-5C-3 provide?
  A: The 88RSAPT-5C-3 provides 1.2 - 13.2 ft-lbs of torque, equal to 15 - 160 in-lbs or 1.7 - 18 Nm. This range is intended for controlled assembly fastening, not impact wrench-style removal of seized fasteners.
• Q: Why choose the 3/8" square drive version?
  A: The 3/8" square drive accepts compatible sockets for hex-head fasteners and small bolts. Choose this model when the station uses sockets rather than 1/4" hex insert bits.
• Q: How is the 88RSAPT-5C-3 different from the 88RSAPT-5CQ?
  A: Both models share the same 400 RPM speed and 1.2 - 13.2 ft-lbs torque range, but the 88RSAPT-5C-3 has a 3/8" square drive for sockets. The 88RSAPT-5CQ uses a 1/4" hex quick change drive for screwdriver bits.
• Q: What does push and trigger start mean?
  A: Push and trigger start means the operator uses trigger control while applying pressure at the fastener. This helps stabilize the socket before the tool begins the fastening cycle.
• Q: What air supply does this screwdriver require?
  A: Cleco rates this tool at 90 PSI, or 620 kPa. The listed air requirements include a 1/4" NPT air inlet, 1/4" minimum hose I.D., and 19 SCFM air consumption.

Looking for more information about Cleco Screwdriver? Click here to view the Catalog.

Need help selecting the correct Cleco Screwdrivers for your application? Please call (800) 608-5210 or email info@intlairtool.com