Cleco 88RSA-7CQ Push Button Reverse Inline Pneumatic Screwdriver | 88 Series | 550 RPM | 1.2 - 7.3 (ft-lbs) Torque Range | 1/4" Hex Quick Change Drive

Built for repetitive bit-driven fastening, the Cleco 88RSA-7CQ gives assembly technicians a compact 88 Series inline pneumatic screwdriver with push-to-start control and push button reverse. Its 550 RPM free speed supports efficient rundown on machine screws and production hardware, while the 1.2 - 7.3 ft-lbs torque range provides controlled output for light assembly tasks where consistent seating matters more than high breakaway force.

The 1/4" hex quick change drive accepts compatible quick-change screwdriver bits, helping operators switch bit styles faster during mixed-fastener work. Push-to-start actuation starts the tool when forward pressure is applied, and the Clecomatic clutch (Cleco’s torque-control clutch for repeatable shut-off performance) helps improve fastening consistency across repeated cycles. This model is well suited for bench assembly, appliance production, electronics-adjacent manufacturing, and MRO work involving small threaded fasteners.

Type: Inline Pneumatic Screwdriver | Series: 88 Series | Model: 88RSA-7CQ | Start Type: Push-to-Start | Reverse Type: Push Button Reverse | Drive Size: 1/4" Hex Quick Change | Torque Range: 1.2 - 7.3 ft-lbs / 1.7 - 10 Nm | Free Speed: 550 RPM | Length: 9.5" / 241 mm | Weight: 2.62 lb / 1.19 kg | Air Consumption: 19.1 SCFM | Air Inlet: 1/4" NPT | Minimum Hose Size: 3/8" | Rated Air Pressure: 90 PSI / 620 kPa

Features:

• 550 RPM free speed supports efficient rundown in repetitive light assembly and production fastening.
• 1/4" hex quick change drive helps operators swap compatible screwdriver bits quickly when moving between fastener styles.
• Push-to-start actuation begins the fastening cycle when the operator applies forward pressure to the fastener.
• Push button reverse allows quick fastener removal, correction, or rework without changing tools.
• Dependable Clecomatic clutch delivers consistent torque accuracy and repeatability for controlled assembly operations.
• Inline configuration supports straight-on fastener access in bench, fixture, and workstation environments.
• Cleco motor construction supports routine pneumatic fastening use in production and maintenance settings.
• High parts interchangeability with other Cleco products helps simplify repair planning and tool crib support.

Made in USA:

Tech Tip: To increase tool performance, extend tool life, and lessen repair costs, use it with a Filter-Regulator-Lubricator FRL)

Applications:

• Bench assembly stations — installing machine screws, cover screws, brackets, and light production hardware with repeatable torque control.
• Appliance and electronics-adjacent manufacturing — fastening panels, housings, guards, and subassemblies that use common screwdriver bits.
• Automotive component assembly — controlled installation of trim-related screws, small brackets, interior components, and light subassemblies.
• Maintenance and repair benches — removing and reinstalling small threaded fasteners during equipment inspection or service.
• Mixed-fastener work cells — switching between compatible bit types when different screw heads are used across the same assembly area.

FAQs:

• Q: What is the difference between the 88RSA-7CQ and 88RSA-7C-3?
  A: The 88RSA-7CQ has a 1/4" hex quick change drive for compatible screwdriver bits. The 88RSA-7C-3 uses a 3/8" square drive for sockets. Both share the same 550 RPM speed and 1.2 - 7.3 ft-lbs torque range.
• Q: What does quick change drive mean?
  A: A quick change drive uses a bit holder that lets the operator swap compatible 1/4" hex bits faster than a fixed drive setup. This is helpful when a workstation uses multiple screw head styles.
• Q: Is this tool meant for removing stuck bolts?
  A: No. This is a controlled pneumatic screwdriver for light fastening within its listed torque range. Stuck bolts, rusted hardware, or wheel fasteners should be handled with an impact wrench sized for removal work.
• Q: Why choose the 550 RPM version?
  A: The 550 RPM speed is useful when the application needs faster rundown than lower-speed models while staying within a modest torque range. It works well for repetitive screw installation where production rhythm matters.
• Q: What air setup does this screwdriver require?
  A: Use clean, regulated air at 90 PSI / 620 kPa with a properly sized hose. A Filter-Regulator-Lubricator helps maintain tool speed, torque consistency, and service life.

Looking for more information about Cleco Tool? Click here to view the Catalog.

Need help selecting the correct Cleco Screwdrivers for your application? Please call (800) 608-5210 or email info@intlairtool.com