Cleco 19RAA02AH2 Pneumatic Collar Reversible Angle Nutrunner | Lever Start | 19 Series | 2,100 RPM | Clutch Shut-Off | 0.3 - 1.7 (ft-lbs) Torque Range

Built for controlled fastening on compact assemblies, the Cleco 19RAA02AH2 pneumatic collar reversible angle nutrunner gives production operators a practical balance of low-torque accuracy, right-angle access, and fast rundown speed. This 19 Series tool features a Clecomatic clutch shut-off system, which stops the tool when the preset torque is reached to help maintain repeatable results from fastener to fastener. With a 2,100 RPM free speed, 1/4" square drive, and 0.3 - 1.7 ft-lbs torque range, it is well suited for small nuts, screws, and bolts used in light industrial assembly, electronics, appliances, automotive components, aerospace workstations, and MRO benches.

The 19RAA02AH2 uses a right-angle head to reach fasteners positioned near housings, panels, brackets, or other obstructions where inline nutrunners can be difficult to align. Collar reverse allows quick direction changes for fastening or removal, while the lever start gives the operator direct control during each rundown. Its 12.5" overall length, 0.50" side-to-center distance, and 1.8 lb weight make it a compact fastening tool for repetitive assembly work where access, accuracy, and cycle speed all matter.

Type: Pneumatic Collar Reversible Angle Nutrunner | Series: 19 Series | Start Type: Lever Start | Clutch Type: Clecomatic Clutch Shut-Off | Drive Size: 1/4" | Drive Type: Square | Torque Range: 0.3 - 1.7 ft-lbs | Torque Range: 6 - 21 in-lbs | Torque Range: 0.7 - 2.4 Nm | Free Speed: 2,100 RPM | Overall Length: 12.5" | Side to Center: 0.50" | Head Height: 1.19" | Air Inlet: 1/8" NPT | Minimum Hose I.D.: 3/16" | Air Consumption: 11 SCFM | Tool Weight: 1.8 lbs

Features:

• Clecomatic clutch shut-off supports repeatable torque control by stopping the tool when the preset torque is reached.
• Externally adjustable clutch allows torque settings to be changed for different small-fastener assembly requirements.
• Right-angle configuration improves access in restricted fastening positions, including recessed hardware and close-to-wall fasteners.
• Collar reverse provides convenient direction change for fastening and removal without changing tools.
• Lever start gives the operator controlled actuation for production and bench assembly work.
• Low inertia motor supports fast rundown while keeping the tool compact for repetitive fastening tasks.
• Lightweight body helps reduce handling effort during repeated cycles in assembly stations.
• Standard equipment includes manual and torque springs required to meet the indicated torque specification.

Tech Tip: To increase tool performance, extend tool life, and lessen repair costs, use it with a Filter-Regulator-Lubricator FRL)

Applications:

• Electronics and controls assembly — fastening small hardware on enclosures, panels, brackets, and compact subassemblies.
• Appliance and light manufacturing — repeated rundown of small nuts and bolts where clutch shut-off helps maintain consistency.
• Automotive component production — tightening interior, trim, sensor bracket, and small housing fasteners in assembly cells.
• Aerospace and precision assembly — accessing confined fasteners where a compact right-angle nutrunner improves alignment.
• Maintenance and repair benches — controlled low-torque fastening and removal on small equipment, fixtures, and service assemblies.

FAQs:

• Q: What type of fastening work is the Cleco 19RAA02AH2 used for?
  A: This model is used for low-torque assembly fastening where repeatability and access are important. It is best suited for small fasteners, not large bolts or high-breakaway applications.
• Q: What does Clecomatic clutch shut-off do?
  A: Clecomatic clutch shut-off automatically stops the tool when the preset torque is reached. This helps improve fastening consistency and reduces the risk of over-tightening delicate parts.
• Q: Why choose the AH2 model instead of a smaller angle head model?
  A: The AH2 configuration provides a higher maximum torque range and a larger angle-head geometry than smaller-head versions. It is useful when the application needs slightly more fastening capacity while still requiring right-angle access.
• Q: Does this nutrunner use standard sockets?
  A: The tool has a 1/4" square drive and should be used with compatible 1/4" drive sockets appropriate for the fastener size and torque range.
• Q: What air setup should be used with this tool?
  A: Use clean, regulated air at the manufacturer-rated pressure and connect the tool through the listed 1/8" NPT inlet with the proper minimum hose size. An FRL helps keep air pressure stable and provides lubrication for pneumatic tool life.

Looking for more information about Cleco Nutrunner? Click here to view the Catalog.

Need help selecting the correct Cleco Nutrunners for your application? Please call (800) 608-5210 or email info@intlairtool.com