Cleco 19BPA06Q Push Button Reverse Inline Pneumatic Screwdriver | 19 Series | 220 RPM | 0.3 - 3.7 (ft-lbs) Torque Range | 1/4" Hex Quick Change Drive

Built for controlled fastening on light and medium assembly work, the Cleco 19BPA06Q is a 19 Series inline pneumatic screwdriver with push-to-start activation, push button reverse, and a 1/4" hex quick change drive for fast bit changes on production benches and repair stations. Its 0.3 - 3.7 ft-lbs torque range supports small fasteners that need repeatable clamp load without over-tightening, while the 220 RPM free speed gives operators a slower, more controlled rundown for higher-torque screws within the 19 Series range.

The inline body helps keep the bit aligned with the fastener, reducing side load during straight-down or horizontal assembly tasks. Cleco’s Clecomatic clutch is a shut-off clutch system, meaning the tool automatically stops air flow at the preset torque instead of continuing to dwell on the fastener. That makes the 19BPA06Q a strong fit for assembly cells, aerospace work, appliance builds, electronics enclosures, and other fastening jobs where torque repeatability matters more than raw speed.

Type: Inline Pneumatic Screwdriver | Series: 19 Series | Model: 19BPA06Q | Start Type: Push-to-Start | Reverse Type: Push Button Reverse | Drive: 1/4" Hex Quick Change | Torque Range: 0.3 - 3.7 ft-lbs / 1.1 - 5.1 Nm | Free Speed: 220 RPM | Length: 9.5" | Weight: 1.5 lbs / 0.68 kg | Air Consumption: 11 SCFM | Air Inlet: 1/8" NPT | Operating Pressure: 90 PSI required for maximum rated torque

Features:

• Clecomatic clutch delivers torque repeatability and a long calibration cycle for fastening operations that require consistent shut-off.
• Push-to-start operation activates when the bit is pressed into the fastener, helping operators maintain alignment before rundown begins.
• Push button reverse allows fast backing-out of screws without changing tools or interrupting the assembly sequence.
• 1/4" hex quick change drive accepts common insert bits and allows quick bit swaps between fastener styles.
• 220 RPM free speed provides controlled rundown for higher-torque screws within the 19 Series inline screwdriver range.
• Lightweight 1.5 lb body helps reduce fatigue during repeated bench, fixture, or assembly-line fastening.
• Grip material is tested to withstand a range of industrial chemicals used in production and maintenance environments.
• Standard equipment includes operating instructions and service manual, suspension bail, and all torque springs required to meet the indicated torque range.

Made in USA:

Tech Tip: To increase tool performance, extend tool life, and lessen repair costs, use it with a Filter-Regulator-Lubricator FRL)

Applications:

• Electronics and electrical assembly — fastening covers, panels, terminals, brackets, and small hardware where controlled torque helps protect components.
• Aerospace and precision manufacturing — repetitive screwdriving on fixtures, subassemblies, and light structural components requiring repeatable rundown.
• Appliance and equipment production — installing screws in housings, frames, trim, guards, and access panels on high-volume assembly lines.
• Automotive interior and component assembly — running screws into plastic, sheet metal, and light bracket assemblies where over-tightening can cause damage.
• Maintenance benches and repair cells — controlled removal and reinstallation of small fasteners during service, rebuild, and inspection work.

FAQs:

• Q: What does push-to-start mean on the Cleco 19BPA06Q?
  A: Push-to-start means the screwdriver begins running when the operator presses the bit into the fastener. This helps keep the bit seated before rotation begins and is useful for repetitive assembly work.
• Q: What type of bits does this screwdriver use?
  A: The 19BPA06Q uses a 1/4" hex quick change drive, so it accepts compatible 1/4" hex screwdriver bits. Always match the bit style to the screw head and fastening application.
• Q: Is the 220 RPM speed fast or slow for this series?
  A: Within the 19 Series, 220 RPM is a slower rundown speed. That slower speed gives better control for fastening at the upper end of this tool’s torque range.
• Q: What air pressure is required?
  A: Cleco rates this tool at 90 PSI / 620 kPa for maximum rated torque. Use a properly regulated air supply to maintain repeatable clutch performance.
• Q: Is this the right tool for wood screws or general DIY work?
  A: This is a precision pneumatic assembly screwdriver, not a general-purpose drill/driver. It is best used for controlled production fastening, repair benches, and light manufacturing tasks where repeatable torque is important.

Looking for more information about Cleco Screwdriver? Click here to view the Catalog.

Need help selecting the correct Cleco Screwdrivers for your application? Please call (800) 608-5210 or email info@intlairtool.com