Cleco 19BPA03Q Push Button Reverse Inline Pneumatic Screwdriver | 19 Series | 1,600 RPM | 0.3 - 2.2 (ft-lbs) Torque Range | 1/4" Hex Quick Change Drive

Built for fast, repeatable fastening on light assembly lines and production benches, the Cleco 19BPA03Q inline pneumatic screwdriver combines 1,600 RPM free speed with a 5–26 in-lbs torque range for controlled screw rundown on small threaded fasteners. Compared with faster, lower-torque models, this 19 Series screwdriver gives operators a broader torque ceiling while still maintaining the speed needed for high-volume assembly work.

The 1/4" hex quick change drive accepts compatible screwdriver bits for common assembly screws, while push-to-start actuation begins tool rotation when the bit is pressed into the fastener. A push-button reverse allows quick fastener removal or correction, and the Clecomatic clutch (Cleco’s automatic shut-off clutch system) helps stop the tool at the preset torque to reduce dwell on the fastener and improve repeatability from cycle to cycle.

Type: Inline Pneumatic Screwdriver | Series: 19 Series | Start Type: Push-to-Start | Reverse Type: Push Button Reverse | Clutch: Clecomatic Clutch | Drive: 1/4" Hex Quick Change | Torque Range: 5–26 in-lbs / 0.6–2.9 Nm / approximately 0.4–2.2 ft-lbs | Torque Range with Standard Spring: 5–19 in-lbs / 0.6–2.1 Nm | Free Speed: 1,600 RPM | Length: 9.3" / 235 mm | Weight: 1.4 lbs / 0.64 kg | Air Inlet: 1/8" NPT | Minimum Hose I.D.: 3/16" | Air Consumption: 11 SCFM | Rated Air Pressure: 90 PSI / 620 kPa

Features:

• Clecomatic clutch delivers torque repeatability and supports a longer calibration cycle in assembly environments.
• Push-to-start operation helps streamline repetitive fastening by activating the tool when axial pressure is applied.
• Push button reverse lets operators quickly back out screws or correct fastener placement during production work.
• 1,600 RPM free speed balances productive rundown with added control for the 5–26 in-lbs torque range.
• 1/4" hex quick change drive supports fast bit replacement at the bench or production station.
• Inline body style helps keep the bit, fastener, and operator-applied pressure aligned for straight screw engagement.
• Grip material is tested to withstand a range of industrial chemicals commonly encountered in production settings.
• Standard equipment includes operating instructions, service manual, suspension bail, and all torque springs required to meet the indicated torque range.

Tech Tip: To increase tool performance, extend tool life, and lessen repair costs, use it with a Filter-Regulator-Lubricator FRL)

Applications:

• Electronics and controls assembly — fastening covers, terminal blocks, brackets, and small hardware with controlled torque.
• Appliance manufacturing — running screws into panels, housings, internal brackets, and subassemblies at production benches.
• Automotive component assembly — installing trim hardware, small brackets, clips, and pre-threaded fasteners.
• Aerospace and precision assembly — controlled fastening on light components where repeatability and alignment are important.
• General manufacturing cells — repetitive screwdriving where quick bit changes and push-to-start operation improve workstation flow.

FAQs:

• Q: What is the torque range of the Cleco 19BPA03Q?
  A: The catalog lists the tool range as 5–26 in-lbs / 0.6–2.9 Nm, which converts to approximately 0.4–2.2 ft-lbs. The standard spring range is listed as 5–19 in-lbs / 0.6–2.1 Nm.
• Q: What does the Clecomatic clutch do?
  A: The Clecomatic clutch shuts off the tool at the user-adjusted preset torque. This helps reduce fastener dwell and supports more consistent torque results than a simple stall-type tool.
• Q: What bits fit the 1/4" hex quick change drive?
  A: This model accepts compatible 1/4" hex screwdriver bits. Match the bit style to the screw head and verify that the bit is appropriate for the tool’s torque range and application.
• Q: How is the 19BPA03Q different from the 19BPA02Q?
  A: The 19BPA03Q runs at 1,600 RPM and has a broader 5–26 in-lbs tool torque range, while the 19BPA02Q is faster at 2,300 RPM with a 5–19 in-lbs range. Choose the 19BPA03Q when the application needs more available torque than the faster model provides.
• Q: What air supply is required for this screwdriver?
  A: Cleco rates the tool at 90 PSI / 620 kPa for maximum rated torque. The listed air requirements are 11 SCFM, a 1/8" NPT air inlet, and a 3/16" minimum hose I.D.

Looking for more information about Cleco Screwdriver? Click here to view the Catalog.

Need help selecting the correct Cleco Screwdrivers for your application? Please call (800) 608-5210 or email info@intlairtool.com