Chicago Pneumatic Orbital Sander | CP5506-R6 | 8000 RPM | 3.6"x6.7" PSA Pad | 3/16" Orbit

Built for surface preparation, finishing, and pre-polishing work, the Chicago Pneumatic CP5506-R6 Orbital Sander delivers smooth material removal with an 8,000 RPM free speed and a 0.5 hp (375 W) motor that provides the power needed for consistent sanding performance in professional shops. Its 3/16" orbit (5 mm sanding pattern that balances finish quality and material removal) helps create uniform surface results, while the 6.7" x 3.6" rectangular PSA pad supports larger sanding areas for bodywork, fabrication, and finishing tasks. The non-vacuum configuration uses a PSA pad attachment system and a palm-style soft grip for controlled operation during extended sanding applications.

The CP5506-R6 features an oil-free motor to help prevent contamination during sanding operations and an integrated motor silencer to reduce operating noise. With a compact 3.75 lb design, 23 CFM air consumption, and a 1/4" NPT air inlet, this pneumatic orbital sander fits well into automotive refinishing, industrial maintenance, and general surface preparation environments where dependable sanding control is required.

Type: Orbital Sander | Model: CP5506-R6 | Part Number: 6151700660 | Free Speed: 8,000 RPM | Power: 0.5 hp (375 W) | Pad Size: 6.7" x 3.6" (170 x 93 mm) | Pad Type: Rectangular PSA | Orbit Diameter: 3/16" (5 mm) | Vacuum: Non Vacuum | Air Consumption: 23 CFM | Air Inlet: 1/4" NPT

Features:

• 0.5 hp (375 W) pneumatic motor provides consistent sanding power for surface preparation and finishing applications.
• 3/16" orbit motion creates a controlled sanding pattern for blending, smoothing, and finishing work.
• Rectangular 6.7" x 3.6" PSA pad provides broad contact coverage for efficient sanding on flat surfaces.
• Palm-shaped soft grip improves tool control during repetitive sanding operations.
• Integrated motor silencer helps reduce operating noise during use.
• Lubrication-free motor design helps prevent oil contamination of sanding surfaces.
• Compact 3.75 lb body supports controlled handling in automotive and industrial sanding environments.

Applications:

• Automotive refinishing - preparing body panels, smoothing filler, and creating consistent surfaces before paint application.
• Metal fabrication and finishing - blending weld areas, removing surface imperfections, and preparing fabricated components.
• Industrial maintenance - sanding painted surfaces, removing coatings, and performing general surface preparation tasks.
• Body shops and repair facilities - handling routine sanding operations where a rectangular PSA pad configuration is preferred.
• Professional workshops - supporting finishing work on wood, metal, and other compatible surfaces with appropriate abrasives.

FAQs:

• Q: What type of sanding work is the CP5506-R6 used for?
  A: The CP5506-R6 is used for surface preparation, finishing, and pre-polishing tasks including automotive refinishing, metal finishing, and general shop sanding applications.
• Q: What does a 3/16" orbit mean on an orbital sander?
  A: The 3/16" orbit refers to the diameter of the sanding motion. This orbit size provides a balance between material removal and finish quality for general sanding work.
• Q: Does the CP5506-R6 include vacuum dust extraction?
  A: No. This model is a non-vacuum configuration. Chicago Pneumatic also offers CP5506-R6 variants with central vacuum and self-vacuum options.
• Q: What compressor size is needed to run this pneumatic sander?
  A: The CP5506-R6 consumes approximately 23 CFM at load. A compressor should be sized to provide adequate continuous airflow for the sanding workload and duty cycle.

Looking for more information about Chicago Pneumatic Orbital Sander? Click here to view the Catalog.

For help selecting the correct Chicago Pneumatic Sanders for your assembly application, call (800) 608-5210 or email info@intlairtool.com