Chicago Pneumatic Air Hydraulic Jack | CP85050 | 50 Tons Capacity

Built for tire changing and maintenance of heavy vehicles, the Chicago Pneumatic CP85050 Air Hydraulic Jack provides a 50-ton lifting capacity and a maximum lift capacity of 110,000 lb. Its air-powered piston provides fast lifting on high-axle vehicles, while the low-profile construction allows access beneath low-chassis trucks and buses. The hard chromium-plated piston is specified for durability and resistance to corrosion, and the long handlebar provides access and control when the jack is positioned beneath a vehicle.

The CP85050 has a 160 mm (6.3") minimum height and reaches 472 mm (18.6") maximum height with extension. Two extension heights of 45 mm and 75 mm are specified for higher lifting, while the handlebar locks at 45°, 90°, and 180° to assist positioning and maneuvering. The jack weighs 132 lb and uses rubber wheels for movement around the workshop.

Type: Air Hydraulic Jack | Model: CP85050 | Part Number: 8941085050 | Capacity: 50 Tons | Maximum Lift Capacity: 110,000 lb | Minimum Height: 6.3" | Maximum Height with Extension: 18.6" | Weight: 132 lb | Extension Heights: 45 mm, 75 mm | Wheel Type: Rubber | Main Material: Steel | Air Hose Internal Diameter: 3/8" (10 mm) | Air Pressure: 90 PSI (6.3 bar)

Features:

• 50-ton lifting capacity provides the specified load rating for heavy-vehicle service applications.
• Air-powered piston provides fast lifting action for high-axle vehicles.
• Hard chromium-plated piston provides the specified resistance to corrosion and wear.
• Low-profile construction allows access beneath low-chassis trucks and buses.
• Two extension heights provide additional lifting height when required.
• Long handlebar provides access and control when the jack is fully positioned beneath a vehicle.
• Handlebar locks at 45°, 90°, and 180° to assist maneuvering and positioning.
• Large soft rubber wheels support movement inside or outside the workshop.
• Carrying handle is mounted on the cylinder for easier transport.
• Convenient joystick provides lifting and control functions from the handle.

Applications:

• Heavy vehicle maintenance — lifting compatible trucks and buses when the load is within the 50-ton rated capacity.
• Heavy-vehicle tire service — supporting tire changing and related maintenance operations.
• Low-chassis vehicle service — using the low-profile design to reach lifting points beneath low vehicles.
• Fleet and commercial vehicle workshops — high-capacity lifting applications requiring a 50-ton air hydraulic jack.
• Workshop and service areas — moving the jack with its rubber wheels and cylinder-mounted carrying handle.

FAQs:

• Q: What is the capacity of the CP85050?
  A: The CP85050 has a 50-ton maximum lifting capacity, equivalent to 110,000 lb in the catalog specification table.
• Q: What is the minimum height of the CP85050?
  A: The specified minimum height is 160 mm, or approximately 6.3 inches.
• Q: How high can the CP85050 lift with an extension?
  A: The manufacturer specifies a maximum height of 472 mm, or approximately 18.6 inches, with extension.
• Q: What extension heights are available?
  A: The CP85050 uses 45 mm and 75 mm extensions for additional lifting height. These extensions are listed by the manufacturer for the CP85 series.
• Q: How does the handlebar adjust?
  A: The handlebar locks in three positions: 45°, 90°, and 180°, allowing the operator to position and maneuver the jack beneath the vehicle.
• Q: How much does the CP85050 weigh?
  A: The catalog lists a net weight of 60 kg, approximately 132 lb.
• Q: What type of wheels does the CP85050 use?
  A: The manufacturer specifies rubber wheels.

Looking for more information about Chicago Pneumatic Air Hydraulic Jack? Click here to view the Catalog.

For help selecting the correct Chicago Pneumatic Air Hydraulic Jacks for your assembly application, call (800) 608-5210 or email info@intlairtool.com