Aircat Pneumatic Tools 810-RW Compact Impacting Ratchet | 50 (ft-lbs) Max Torque | 550 RPM | 3/8" Square Drive

When tight access calls for more run-down speed and less reaction than a conventional air ratchet, the AIRCAT 810-RW 3/8" Compact Impacting Ratchet gives technicians a compact pneumatic tool for small-fastener service in crowded work areas. Its 50 ft-lbs maximum torque supports light fastening and removal tasks, while the 550 RPM free speed provides very fast run-down for brackets, covers, clamps, guards, panels, and compact service hardware. The 3/8" square drive fits compatible 3/8" drive sockets, making this impacting ratchet useful when a palm ratchet is too short or a standard ratchet feels too reactive in close quarters.

The 810-RW uses a roller clutch impact mechanism (an impact-style ratchet drive that helps reduce kick-back and reaction at the handle), helping protect the operator’s fingers when fasteners suddenly stop or tighten. At 1.40 lbs. and only 6.30" long, it fits into tight engine-bay, radiator, equipment, and service-panel areas while keeping the tool easy to maneuver. AIRCAT lists this model at a quiet 79 dBA, and the ergonomic composite over-mold grip helps improve comfort during repeated small-fastener work.

Type: Compact Impacting Ratchet | Model: 810-RW | Drive Size: 3/8" Square Drive | Free Speed: 550 RPM | Bolt Capacity: 3/8" | Max Torque: 50 ft-lbs @ 90 PSI | Weight: 1.40 lbs. | Length: 6.30" | Air Consumption: 4.0 CFM | Recommended Hose Size: 3/8" | Air Inlet: 1/4" NPT | Noise Level: 79 dBA

Features:

• Provides 50 ft-lbs of maximum torque for small fastener removal and installation.
• 550 RPM free speed provides ultra-fast run-down compared with lower-speed ratchets.
• Roller clutch impact mechanism helps prevent kick-back and reduces reaction during fastener run-down.
• Compact 6.30" body helps the tool fit around radiators, engine-bay components, brackets, covers, and other confined service areas.
• Forward/reverse switch with safety lock helps prevent unwanted directional changes during use.
• Ergonomic composite over-mold grip supports comfortable handling during repeated small-fastener tasks.
• Quiet 79 dBA sound level makes this model noticeably quieter than many conventional air ratchets.
• Light 1.40 lb. tool weight helps reduce hand fatigue during close-quarter fastening work.

Applications:

• Automotive engine-bay service: Running down and removing fasteners around radiators, brackets, clamps, covers, sensors, and tight accessory locations.
• General repair work: Handling small 3/8" drive socket tasks where a compact impacting ratchet helps reduce hand reaction and tool bulk.
• Equipment maintenance: Servicing guards, access covers, compact panels, light brackets, and small mounting hardware on machinery and shop equipment.
• Body, interior, and trim service: Working on panels, retainers, light hardware, and tight locations where fast run-down and compact length are useful.
• MRO and shop maintenance: Removing and installing small fasteners on fixtures, housings, covers, brackets, and light mechanical assemblies.

FAQs:

• Q: What is the AIRCAT 810-RW best used for?
  A: The AIRCAT 810-RW is best used for small-fastener work in tight areas where technicians want fast run-down, compact length, and reduced ratchet kick-back. Common uses include automotive repair, radiator-area service, equipment maintenance, light assembly, and general MRO work.
• Q: What makes this an “impacting” ratchet?
  A: The 810-RW uses a roller clutch impact mechanism instead of operating like a conventional direct-drive ratchet. This helps reduce kick-back at the handle and makes the tool easier to control when fasteners tighten suddenly.
• Q: How is the AIRCAT 810-RW different from the AIRCAT 807?
  A: The AIRCAT 807 is a 3/8" mini palm ratchet rated at 35 ft-lbs and 300 RPM. The AIRCAT 810-RW is a compact impacting ratchet rated at 50 ft-lbs and 550 RPM, giving it higher torque and faster run-down in a slightly longer 6.30" body.
• Q: What air hose size should I use with the AIRCAT 810-RW?
  A: AIRCAT lists a 3/8" recommended hose size and a 1/4" NPT air inlet for this model. Using clean, regulated air helps the tool deliver proper speed, torque, and service life.
• Q: Can this impacting ratchet replace a torque wrench?
  A: No. The 810-RW helps remove and run down fasteners quickly, but final torque should be verified with a calibrated torque wrench whenever a specific torque value is required.

Looking for more information about the Aircat Pneumatic Tools Impact Wrenches? Click here to view the Catalog.

For help choosing the correct Aircat Pneumatic Tools, please call (800) 608-5210 or email info@intlairtool.com