Aircat Pneumatic Tools 807 "Mini" Palm Ratchet | 35 (ft-lbs) Max Torque | 300 RPM | 3/8" Square Drive

When small fasteners are tucked into tight service areas but a 3/8" drive socket is preferred, the AIRCAT 807 "Mini" Palm Ratchet gives technicians a compact pneumatic ratchet for controlled run-down and removal work. Its 35 ft-lbs maximum torque supports light fastener service, while the 300 RPM free speed helps run hardware down faster than hand ratcheting. The 3/8" square drive fits compatible 3/8" drive sockets, making this palm ratchet useful around radiators, engine compartments, brackets, covers, clamps, interior panels, and other close-clearance repair areas.

At only 5.40" long and 1.10 lbs., the 807 is built for access where a longer pneumatic ratchet may be difficult to position. The ergonomic composite over-mold grip helps improve comfort during repeated use, while the palm-style body keeps the tool compact for work around tight underhood and service-bay locations. With 3.0 CFM air consumption, a 3/8" recommended hose size, and a 1/4" NPT air inlet, this mini ratchet fits common shop air setups for small-fastener service.

Type: Mini Palm Ratchet | Model: 807 | Drive Size: 3/8" Square Drive | Free Speed: 300 RPM | Bolt Capacity: 3/8" | Max Torque: 35 ft-lbs @ 90 PSI | Weight: 1.10 lbs. | Length: 5.40" | Air Consumption: 3.0 CFM | Recommended Hose Size: 3/8" | Air Inlet: 1/4" NPT

Features:

• Provides 35 ft-lbs of maximum torque for small fastener removal and installation.
• 300 RPM free speed helps speed up run-down compared with manual ratcheting.
• 3/8" square drive fits compatible 3/8" drive sockets for common small-fastener service work.
• Mini palm ratchet layout helps technicians work in tight areas where a standard-length ratchet may be awkward.
• Ergonomic composite over-mold grip supports comfort during repeated close-quarter tasks.
• Compact 5.40" length helps the tool fit around radiators, brackets, covers, and other confined work areas.
• Light 1.10 lb. tool weight helps reduce hand fatigue during small-fastener service.
• 3.0 CFM air consumption supports use with common shop air systems when supplied with clean, regulated air.

Applications:

• Automotive engine bays: Running down and removing small fasteners around radiators, brackets, covers, clamps, accessories, and tight underhood locations.
• General repair work: Servicing light hardware where a compact 3/8" drive ratchet helps reduce tool bulk around close-clearance parts.
• Interior and trim service: Working on panels, light brackets, retainers, and small hardware where hand ratcheting is slow or difficult.
• Equipment maintenance: Removing and installing small fasteners on guards, covers, access panels, compact brackets, and service points.
• MRO and shop maintenance: Handling small hardware on fixtures, housings, panels, and light mechanical assemblies in confined areas.

FAQs:

• Q: What is the AIRCAT 807 best used for?
  A: The AIRCAT 807 is best used for small-fastener work in confined spaces where a compact 3/8" drive pneumatic ratchet is easier to position than a standard-length ratchet. Common uses include work around radiators, engine compartments, access panels, light brackets, covers, and clamps.
• Q: Is this a 3/8" drive or 1/4" drive ratchet?
  A: The AIRCAT 807 has a 3/8" square drive. AIRCAT lists the 807-25 as the related 1/4" mini palm ratchet.
• Q: What does 300 RPM mean on this palm ratchet?
  A: RPM is the tool’s free-speed rating. On the 807, 300 RPM helps run fasteners down quickly, but final tightening should still be controlled to match the fastener, material, and application.
• Q: What air hose size should I use with the AIRCAT 807?
  A: AIRCAT lists a 3/8" recommended hose size and a 1/4" NPT air inlet for this model. Using clean, regulated air helps the tool deliver proper speed and torque.
• Q: Can this palm ratchet replace a torque wrench?
  A: No. This pneumatic ratchet helps remove and run down small fasteners, but final torque should be checked with a calibrated torque wrench whenever a specific torque value is required.

Looking for more information about the Aircat Pneumatic Ratchets? Click here to view the Catalog.

For help choosing the correct Aircat Pneumatic Tools, please call (800) 608-5210 or email info@intlairtool.com