When small fastener work calls for a 3/8" drive pneumatic ratchet, the AIRCAT 801 3/8" Composite Ratchet gives technicians a compact tool for automotive repair, body work, equipment service, light assembly, and general shop maintenance. Its 35 ft-lbs maximum torque supports small fastener removal and installation, while the 320 RPM free speed helps speed up repetitive run-down tasks compared with hand ratcheting. The 3/8" square drive fits compatible 3/8" drive sockets for brackets, covers, panels, clamps, guards, light hardware, and service components.
The 801 uses a single pawl mechanism (a ratchet design where one pawl engages the ratchet gear to transmit turning force), paired with AIRCATs internal mechanics for consistent small-fastener performance. At 1.60 lbs. and 8.50" long, this composite ratchet gives technicians a traditional ratchet layout with more socket-drive capacity than the 1/4" AIRCAT 800 while keeping the same compact body size. AIRCATs patented quiet tuned exhaust reduces operating noise to 82 dBA, and the feather trigger helps the operator control speed during fastener start, run-down, and removal.
Type: Composite Ratchet | Model: 801 | Drive Size: 3/8" Square Drive | Free Speed: 320 RPM | Bolt Capacity: 3/8" | Max Torque: 35 ft-lbs @ 90 PSI | Weight: 1.60 lbs. | Length: 8.50" | Air Consumption: 4.0 CFM | Recommended Hose Size: 3/8" | Air Inlet: 1/4" NPT | Noise Level: 82 dBA
Features:
- Provides 35 ft-lbs of maximum torque for small fastener removal and installation.
- 320 RPM free speed helps speed up fastener run-down compared with manual ratcheting.
- 3/8" square drive fits compatible 3/8" drive sockets for common light service and repair work.
- Single pawl mechanism supports compact ratchet operation for controlled fastening tasks.
- AIRCAT lists this model as the strongest 3/8" ratchet in its class.
- Patented quiet tuned exhaust reduces operating noise to 82 dBA.
- Feather trigger gives the operator control over speed during fastener start, run-down, and removal.
- Ergonomically designed housing supports comfortable handling during automotive, body, interior, and MRO applications.
Applications:
- Automotive repair: Running down and removing small fasteners on brackets, covers, clamps, light engine-bay hardware, and service components.
- Body and interior work: Servicing panels, trim hardware, retainers, light brackets, and compact assemblies where 3/8" drive sockets are used.
- Equipment maintenance: Working on guards, access covers, small mounting hardware, service panels, and compact repair points.
- Light assembly: Speeding up repetitive fastener installation before final hand feel or torque verification.
- MRO and shop service: Handling small hardware on fixtures, housings, panels, brackets, and light mechanical assemblies in general maintenance environments.
FAQs:
- Q: What is the AIRCAT 801 best used for?
A: The AIRCAT 801 is best used for small-fastener work where a 3/8" drive pneumatic ratchet can speed up run-down and removal. Common uses include automotive repair, body and interior work, equipment service, light assembly, and general MRO tasks. - Q: How is the AIRCAT 801 different from the AIRCAT 800?
A: The AIRCAT 801 has a 3/8" square drive, while the AIRCAT 800 has a 1/4" square drive. Both are listed with 35 ft-lbs maximum torque, 320 RPM free speed, 1.60 lb. weight, and 8.50" length, but they use different socket drive sizes. - Q: What does 320 RPM mean on this ratchet?
A: RPM is the free-speed rating of the tool. On the 801, 320 RPM helps run small fasteners down quickly, but final tightening should still match the fastener, material, and application requirements. - Q: What air hose size should I use with the AIRCAT 801?
A: AIRCAT lists a 3/8" recommended hose size and a 1/4" NPT air inlet for this model. Using clean, regulated air helps the tool deliver proper speed and torque. - Q: Can this ratchet replace a torque wrench?
A: No. This pneumatic ratchet helps remove and run down small fasteners, but final torque should be checked with a calibrated torque wrench whenever a specific torque value is required.
| SKU | Free Speed (RPM) |
Bolt Capacity (in.) |
Square Drive (in.) |
Max. Torque (ft-lb) @90 psi |
Weight (lbs.) |
Length (in) |
Air Cons. (CFM) |
Rec. Hose Size (in.) |
Air Inlet NPT (in.) |
|---|---|---|---|---|---|---|---|---|---|
| 807 | 300 | 3/8 | 3/8 | 35 | 1.10 | 5.40 | 3.0 | 3/8 | 1/4 |
| 801 | 320 | 3/8 | 3/8 | 35 | 1.60 | 8.50 | 4.0 | 3/8 | 1/4 |
| 810-RW | 550 | 3/8 | 3/8 | 50 | 1.40 | 6.30 | 4.0 | 3/8 | 1/4 |
| 812-RW | 350 | 1/2 | 3/8 | 80 | 2.96 | 9.80 | 4.0 | 3/8 | 1/4 |
Looking for more information about the Aircat Pneumatic Tools Impact Wrenches? For help choosing the correct Aircat Pneumatic Tools, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
