When tire shops need a 1/2" impact wrench that can operate on higher shop air pressure, the AIRCAT 1460-XL 1/2" High Air Pressure Impact Wrench gives technicians a pneumatic tool built for fast wheel-service and repair-bay fastening. Its 725 ft-lbs maximum torque supports lug nut removal, suspension hardware, brackets, underbody fasteners, and general service bolts, while 900 ft-lbs of loosening torque helps break tight or corroded hardware free before run-down. The 9,600 RPM free speed and 1,600 impacts per minute help move repetitive tire and shop tasks along quickly, and the 1/2" square drive fits common impact-rated sockets used in automotive bays, tire shops, fleet garages, and maintenance departments.
The 1460-XL uses a hard-hitting twin hammer mechanism (an impact design that delivers two balanced blows per rotation for steady power transfer), giving the tool reliable impact output for frequent removal and installation work. AIRCAT lists this model as built for tire shops to operate up to 125 PSI air pressure, making it a specialized choice for shop environments that run higher regulated air pressure than standard 90 PSI tool setups. At 5.75 lbs. and 7.25" long, it provides a familiar full-size 1/2" impact profile, while the molded motor housing cover helps protect the tool body during regular service use.
Type: High Air Pressure Impact Wrench | Model: 1460-XL | Drive Size: 1/2" Square Drive | Free Speed: 9,600 RPM | Bolt Capacity: 9/16" | Impacts Per Minute: 1,600 IPM | Max Torque: 725 ft-lbs | Loosening Torque: 900 ft-lbs | High Air Pressure Use: Up to 125 PSI | Weight: 5.75 lbs. | Length: 7.25" | Air Consumption: 8 CFM | Recommended Hose Size: 3/8" | Air Inlet: 1/4" NPT
Features:
- Provides 725 ft-lbs of maximum torque and 900 ft-lbs of loosening torque for tire shop, automotive, fleet, and maintenance fastening work.
- Hard-hitting twin hammer mechanism supports reliable impact output during repeated wheel-service and repair-bay tasks.
- Built for tire shops to operate up to 125 PSI air pressure.
- Improved grip shape supports controlled handling during fastener removal, installation, and direction changes.
- Molded motor housing cover protects the tool body and adds durability during regular shop use.
- Cross bolt style forward/reverse and power management control gives the operator direction and output control from the tool body.
- Triple heat treated alloy steel hammers, hammer cage, and anvil support reliability under repeated impact loads.
- Reliable throttle design with tease trigger helps the operator control speed during fastener start-up and run-down.
Applications:
- Tire shops and wheel service: Removing passenger-vehicle and light-truck lug nuts when fastener condition, socket size, and torque requirement are within the tool's capability.
- Automotive repair bays: Handling suspension bolts, brake hardware, brackets, underbody fasteners, engine-bay hardware, and general service bolts.
- Fleet maintenance: Servicing pickups, vans, trailers, shop vehicles, guards, service panels, accessory mounts, and chassis hardware that use 1/2" drive impact sockets.
- Industrial maintenance and MRO: Running down and removing fasteners on machinery covers, fixtures, access plates, equipment frames, and repair benches where a 1/2" pneumatic impact is appropriate.
- DIY garage and restoration work: Useful for experienced home mechanics working on rusted automotive hardware, wheel-area service, suspension repairs, and project vehicles with a properly regulated air supply.
FAQs:
- Q: What makes the AIRCAT 1460-XL a high air pressure impact wrench?
A: AIRCAT lists the 1460-XL as built for tire shops to operate up to 125 PSI air pressure. That makes it different from many standard pneumatic impacts that are typically rated around a 90 PSI operating setup. - Q: What is the AIRCAT 1460-XL best used for?
A: The 1460-XL is best suited for tire shops, automotive service bays, fleet garages, and maintenance departments that need a 1/2" impact wrench for repeated wheel-area and general fastener work. Common uses include lug nut removal, suspension hardware, brackets, underbody fasteners, and shop repair tasks. - Q: What is the difference between 725 ft-lbs max torque and 900 ft-lbs loosening torque?
A: Maximum torque is the tool's headline output rating, while loosening torque is the breakaway force available for removing tightened or stuck fasteners. Final tightening should always be completed with a calibrated torque wrench rather than the impact wrench alone. - Q: What air hose size should I use with the AIRCAT 1460-XL?
A: AIRCAT lists a 3/8" recommended hose size for this model. Using the recommended hose helps maintain air volume so the tool can deliver proper speed and torque under load. - Q: Can I use chrome hand sockets with this impact wrench?
A: No. Use only impact-rated 1/2" drive sockets. Chrome hand sockets are not built for repeated impact loads and can crack or fail when used with a pneumatic impact wrench.
| SKU | Free Speed (RPM) | Bolt Capacity (in.) | Square Drive (in.) | Impacts Per Minute | Max. Torque (ft-lb) | Weight (lbs.) | Length (in) | Air Cons. (CFM) | Rec. Hose Size (in.) | Air Inlet NPT (in.) |
|---|---|---|---|---|---|---|---|---|---|---|
| 1450 | 9,000 | 9/16 | 1/2 | 1200 | 800 | 4.90 | 7.00 | 8 | 3/8 | 1/4 |
| 1450-2 | 9,000 | 9/16 | 1/2 x 2 | 1200 | 800 | 5.10 | 9.00 | 8 | 3/8 | 1/4 |
| 1460-XL | 9,600 | 9/16 | 1/2 | 1600 | 725 | 5.75 | 7.25 | 8 | 3/8 | 1/4 |
| 1460-XL-2 | 9,600 | 9/16 | 1/2 x 2 | 1600 | 725 | 6.00 | 9.25 | 8 | 3/8 | 1/4 |
Looking for more information about the Aircat Pneumatic Impact Wrenches? For help choosing the correct Aircat Pneumatic Tools, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
