When recessed wheel hardware, brackets, or underbody fasteners need extra reach, the AIRCAT 1450-2 1/2" Impact Wrench with 2" Extended Anvil gives technicians the same 1/2" impact platform as the 1450 with added anvil length for deeper socket access. Its 800 ft-lbs maximum torque supports automotive, fleet, tire, and maintenance fastening, while 1,000 ft-lbs of loosening torque helps break tight or corroded hardware free before run-down. The 9,000 RPM free speed and 1,200 impacts per minute help keep repetitive service work moving, and the 1/2" x 2" square drive extended anvil helps position sockets into recessed lug nuts, wheel wells, and hard-to-reach service points.
The 1450-2 uses a refined design twin hammer mechanism (an impact design that delivers balanced repeated blows to the anvil for efficient power transfer), giving the tool very fast torque development for common removal and installation tasks. At 5.10 lbs. and 9.00" long, this extended-anvil model provides added reach compared with the standard 1450 while staying manageable for daily shop use. The six-position power management switch in the back cap gives the operator added control over output, and the brushed aluminum housing supports a durable full-size impact wrench body.
Type: Impact Wrench with 2" Extended Anvil | Model: 1450-2 | Drive Size: 1/2" Square Drive x 2" Extended Anvil | Free Speed: 9,000 RPM | Bolt Capacity: 9/16" | Impacts Per Minute: 1,200 IPM | Max Torque: 800 ft-lbs | Loosening Torque: 1,000 ft-lbs | Weight: 5.10 lbs. | Length: 9.00" | Air Consumption: 8 CFM | Recommended Hose Size: 3/8" | Air Inlet: 1/4" NPT
Features:
- Provides 800 ft-lbs of maximum torque and 1,000 ft-lbs of loosening torque for 1/2" drive fastening and removal work.
- 2" extended anvil helps reach recessed lug nuts, wheel hardware, brackets, and deeper service points.
- Refined design twin hammer increases blow frequency and efficiency.
- Very fast torque development helps break fasteners loose and move quickly through repeated service jobs.
- Six-position power management switch in the back cap provides added output control.
- Grip is shaped to support controlled handling during removal, installation, and direction changes.
- Brushed aluminum housing supports a durable full-size impact wrench body for regular shop use.
Applications:
- Tire and wheel service: Reaching recessed lug nuts and wheel-area hardware where a 2" extended anvil improves socket placement.
- Automotive repair: Removing and installing suspension bolts, brake hardware, brackets, underbody fasteners, engine-bay hardware, and general service bolts within the tool's torque range.
- Fleet maintenance: Servicing pickups, vans, trailers, service panels, guards, mounts, and shop vehicles that use common 1/2" drive impact sockets.
- Industrial maintenance and MRO: Running down and removing fasteners on machinery covers, fixtures, access plates, equipment frames, and maintenance benches where added anvil reach helps access.
- DIY garage and restoration work: Useful for experienced home mechanics working on recessed wheel hardware, rusted automotive fasteners, suspension repairs, and project vehicles with a properly sized air supply.
FAQs:
- Q: What is the benefit of the 2" extended anvil?
A: The 2" extended anvil moves the socket farther away from the tool body, making it easier to reach recessed lug nuts, wheel hardware, and fasteners located behind surrounding components. It is useful when access depth is the issue, not just torque. - Q: How is the AIRCAT 1450-2 different from the AIRCAT 1450?
A: Both models are listed with 800 ft-lbs of maximum torque, 1,000 ft-lbs of loosening torque, 9,000 RPM free speed, and 1,200 impacts per minute. The 1450-2 adds a 2" extended anvil, increasing weight to 5.10 lbs. and overall length to 9.00". - Q: What does the six-position power management switch do?
A: The six-position power management switch gives the operator more control over output from the back cap of the tool. This helps when switching between run-down, removal, and more controlled fastening tasks. - Q: What air hose size should I use with the AIRCAT 1450-2?
A: AIRCAT lists a 3/8" recommended hose size for this model. Using the recommended hose helps maintain air volume so the tool can deliver proper speed and torque under load. - Q: Can I use chrome hand sockets with this impact wrench?
A: No. Use only impact-rated 1/2" drive sockets. Chrome hand sockets are not built for repeated impact loads and can crack or fail when used with a pneumatic impact wrench.
| SKU | Free Speed (RPM) | Bolt Capacity (in.) | Square Drive (in.) | Impacts Per Minute | Max. Torque (ft-lb) | Weight (lbs.) | Length (in) | Air Cons. (CFM) | Rec. Hose Size (in.) | Air Inlet NPT (in.) |
|---|---|---|---|---|---|---|---|---|---|---|
| 1450 | 9,000 | 9/16 | 1/2 | 1200 | 800 | 4.90 | 7.00 | 8 | 3/8 | 1/4 |
| 1450-2 | 9,000 | 9/16 | 1/2 x 2 | 1200 | 800 | 5.10 | 9.00 | 8 | 3/8 | 1/4 |
| 1460-XL | 9,600 | 9/16 | 1/2 | 1600 | 725 | 5.75 | 7.25 | 8 | 3/8 | 1/4 |
| 1460-XL-2 | 9,600 | 9/16 | 1/2 x 2 | 1600 | 725 | 6.00 | 9.25 | 8 | 3/8 | 1/4 |
Looking for more information about the Aircat Pneumatic Impact Wrenches? For help choosing the correct Aircat Pneumatic Tools, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
