When a repair bay needs a straightforward 1/2" pneumatic impact wrench with fast torque development, the AIRCAT 1450 1/2" Impact Wrench gives technicians a strong option for automotive, fleet, and maintenance fastening. Its 800 ft-lbs maximum torque supports suspension, brake, bracket, underbody, wheel-area, and equipment fasteners, while 1,000 ft-lbs of loosening torque helps break tight or corroded hardware free before run-down. The 9,000 RPM free speed and 1,200 impacts per minute help move repetitive service work along quickly, and the 1/2" square drive fits common impact-rated sockets used across shop and MRO environments.
The 1450 uses a refined design twin hammer mechanism (an impact design that delivers balanced repeated blows to the anvil for efficient power transfer), giving the tool very fast torque development for common removal and installation tasks. At 4.90 lbs. and 7.00" long, it provides a familiar full-size 1/2" impact profile for daily shop use. The rear six-position power management switch gives technicians added control over output, while the 89.6 dBA noise level keeps the tool within AIRCAT's lower-noise impact wrench lineup.
Type: Impact Wrench | Model: 1450 | Drive Size: 1/2" Square Drive | Free Speed: 9,000 RPM | Bolt Capacity: 9/16" | Impacts Per Minute: 1,200 IPM | Max Torque: 800 ft-lbs | Loosening Torque: 1,000 ft-lbs | Weight: 4.90 lbs. | Length: 7.00" | Air Consumption: 8 CFM | Recommended Hose Size: 3/8" | Air Inlet: 1/4" NPT/BSP | Noise Level: 89.6 dBA | Vibration: 13.5 m/sec²
Features:
- Provides 800 ft-lbs of maximum torque and 1,000 ft-lbs of loosening torque for 1/2" drive fastening and removal work.
- Refined design twin hammer increases blow frequency and efficiency.
- Very fast torque development helps break fasteners loose and move quickly through repeated service jobs.
- Six-position power management switch in the back cap provides added output control.
- Grip is shaped to support controlled handling during removal, installation, and direction changes.
- 9,000 RPM free speed and 1,200 IPM support fast run-down during shop and maintenance work.
- 1/2" square drive works with compatible impact-rated sockets for common automotive, fleet, and industrial maintenance fasteners.
Applications:
- Automotive service: Removing and installing suspension bolts, brake hardware, brackets, underbody fasteners, engine-bay hardware, and general repair bolts within the tool's torque range.
- Fleet maintenance: Servicing pickups, vans, trailers, service panels, guards, mounts, and shop vehicles that use common 1/2" drive impact sockets.
- Tire and wheel work: Removing passenger-vehicle and light-truck lug nuts when fastener condition and torque requirements are within the tool's capability.
- Industrial maintenance and MRO: Running down and removing fasteners on machinery covers, fixtures, access plates, equipment frames, and maintenance benches.
- DIY garage and restoration work: Useful for experienced home mechanics working on rusted automotive hardware, suspension repairs, and project vehicles with a properly sized air supply.
FAQs:
- Q: What is the AIRCAT 1450 best used for?
A: The AIRCAT 1450 is best used for general 1/2" drive automotive, fleet, and maintenance fastening where the job needs 800 ft-lbs of maximum torque and 1,000 ft-lbs of loosening torque. Common uses include suspension work, brake hardware, underbody bolts, wheel-area service, shop equipment, and general repair tasks. - Q: What does the six-position power management switch do?
A: The six-position power management switch gives the operator more control over output from the back cap of the tool. This helps when switching between run-down, removal, and more controlled fastening tasks. - Q: What is the difference between max torque and loosening torque?
A: Maximum torque is the tool's headline torque output rating, while loosening torque is the breakaway force used to remove tightened or stuck fasteners. AIRCAT lists the 1450 at 800 ft-lbs maximum torque and 1,000 ft-lbs loosening torque. - Q: What air hose size should I use with the AIRCAT 1450?
A: AIRCAT lists a 3/8" recommended hose size for this model. Using the recommended hose helps maintain air volume so the tool can deliver proper speed and torque under load. - Q: Can I use chrome hand sockets with this impact wrench?
A: No. Use only impact-rated 1/2" drive sockets. Chrome hand sockets are not built for repeated impact loads and can crack or fail when used with a pneumatic impact wrench.
| SKU | Free Speed (RPM) | Bolt Capacity (in.) | Square Drive (in.) | Impacts Per Minute | Max. Torque (ft-lb) | Weight (lbs.) | Length (in) | Air Cons. (CFM) | Rec. Hose Size (in.) | Air Inlet NPT (in.) |
|---|---|---|---|---|---|---|---|---|---|---|
| 1450 | 9,000 | 9/16 | 1/2 | 1200 | 800 | 4.90 | 7.00 | 8 | 3/8 | 1/4 |
| 1450-2 | 9,000 | 9/16 | 1/2 x 2 | 1200 | 800 | 5.10 | 9.00 | 8 | 3/8 | 1/4 |
| 1460-XL | 9,600 | 9/16 | 1/2 | 1600 | 725 | 5.75 | 7.25 | 8 | 3/8 | 1/4 |
| 1460-XL-2 | 9,600 | 9/16 | 1/2 x 2 | 1600 | 725 | 6.00 | 9.25 | 8 | 3/8 | 1/4 |
Looking for more information about the Aircat Pneumatic Impact Wrenches? For help choosing the correct Aircat Pneumatic Tools, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
