Cleco 961560-100 NeoTek Tool Cable | 32.9' Length | Use With 30 / 50 / 70 Series Tools

Built for Cleco NeoTek controlled fastening layouts that require the longest standard tool-cable reach in this group, the Cleco 961560-100 NeoTek Tool Cable connects compatible corded assembly tools to the fastening system controller. This 32.9 ft straight tool cable is specified for Cleco 30, 50, and 70 Series tools, making it a practical choice for large fixtures, overhead cable routing, remote controller mounting, and assembly stations where the tool must travel farther from the control point.

The NeoTek cable design uses a quarter-turn connection, which locks with a short twist instead of a threaded-style connector. That helps simplify cable replacement during maintenance and reduces the risk of thread damage from repeated connection cycles. Its ultra-tight bend radius supports cleaner routing around benches, tool balancers, fixtures, and cable management hardware where long cable runs still need to remain controlled and organized.

Type: Tool Cable | Series: NeoTek | Model: 961560-100 | Length: 32.9 ft / 10 m | Configuration: Straight Tool Cable | Use With: Cleco 30 / 50 / 70 Series Tools | Connection: Quarter-Turn | Bend Radius: 30 mm

Features:

• Connects Cleco 30, 50, and 70 Series tools to compatible NeoTek controlled fastening systems.
• 32.9 ft / 10 m cable length provides extended reach for large assembly fixtures, overhead cable paths, and remotely mounted controllers.
• Quarter-turn connection helps speed installation and replacement while reducing problems associated with damaged threaded connectors.
• Ultra-tight 30 mm bend radius supports practical cable routing through bench frames, tool balancer systems, and cable management hardware.
• Built for maximum life in repetitive production fastening environments.
• Supports digital communication between compatible Cleco NeoTek tools and fastening system controllers.
• Cycle counter memory helps maintenance teams monitor tool usage for scheduled service and preventative maintenance planning.

Made in USA:

Applications:

• Large controlled-fastening workstations using Cleco 30, 50, or 70 Series corded electric assembly tools.
• Automotive and transportation assembly lines where tool controllers are mounted away from the operator’s fastening position.
• Aerospace, appliance, and equipment manufacturing cells that need compatible Cleco NeoTek tool connectivity across larger fixtures.
• Overhead routing and tool balancer installations where the cable must travel through cable trays, arms, or workstation hardware.
• Tool crib replacement programs for standardizing 10 m cable runs across compatible Cleco precision fastening stations.

FAQs:

• Q: Which Cleco tools can use the 961560-100 cable?
  A: This NeoTek tool cable is specified for Cleco 30, 50, and 70 Series tools. Confirm the exact tool series and controller configuration before ordering a replacement cable.
• Q: How long is the Cleco 961560-100 NeoTek cable?
  A: The 961560-100 cable is 32.9 ft long, which is approximately 10 meters.
• Q: When should I choose the 10 m cable length?
  A: The 10 m cable is useful when the controller is mounted well away from the work area, when cable routing must travel overhead, or when the tool must cover a large fixture or assembly zone.
• Q: Is this cable an extension cable?
  A: No. This SKU is a straight tool cable for compatible Cleco 30, 50, and 70 Series tools. If your setup requires an extension cable, verify the correct Cleco NeoTek extension part number for your system.

Looking for more information about Cleco NeoTek Tool Cable? Click here to view the Catalog.

Need help selecting the correct Cleco Assembly Tools Accessories for your application? Please call (800) 608-5210 or email info@intlairtool.com