Ingersoll Rand MX60F-SD Vibration-Reduced Spike Driver is a pneumatic tool specifically designed for driving rail spikes in railroad construction and maintenance applications. Featuring a Flex-Handle vibration-reduction system and delivering 1,250 BPM (blows per minute), this spike driver provides the impact performance needed for repetitive spike-driving operations while helping improve operator comfort during extended use.
MX60F-SD combines dependable pneumatic power with a Flex-Handle design that helps reduce the transmission of vibration to the operator. Engineered for rail maintenance crews, it is well suited for installing rail spikes during track construction, repair, and routine maintenance where consistent impact performance and reduced operator fatigue are important.
Tool Type: Vibration-Reduced Spike Driver | Application: Rail Spikes | Blow Rate: 1,250 BPM | Handle Type: Flex-Handle
Features:
- Designed specifically for driving rail spikes in railroad construction and maintenance applications.
- Flex-Handle system helps reduce vibration transmitted to the operator during repetitive spike-driving work.
- 1,250 blows per minute provides consistent pneumatic impact performance.
- Pneumatic operation delivers reliable power for continuous railroad maintenance tasks.
- Built for repetitive impact applications requiring dependable performance in demanding field conditions.
- Suitable for professional railroad maintenance and track installation crews.
Tech Tip: To increase tool performance, extend tool life and lessen repair costs use it with a Filter-Regulator-Lubricator (FRLs)
Applications:
- Driving rail spikes during railroad track installation.
- Railroad maintenance and track repair operations.
- Replacement of spikes during rail infrastructure rehabilitation.
- Construction of new railway lines and sidings.
- Routine maintenance performed by railroad and transit maintenance crews.
FAQs:
- Q: What is the MX60F-SD designed to do?
A: The MX60F-SD is designed specifically for driving rail spikes in railroad construction and maintenance applications. - Q: What is the benefit of the Flex-Handle?
A: The Flex-Handle is designed to help reduce vibration transmitted to the operator, improving comfort during extended spike-driving operations. - Q: What is the operating blow rate of this spike driver?
A: The MX60F-SD delivers 1,250 blows per minute (BPM). - Q: Is this tool intended for general pavement demolition?
A: No. The MX60F-SD is specifically designed for driving rail spikes rather than general pavement-breaking applications. - Q: What industries commonly use the MX60F-SD?
A: It is commonly used by railroad contractors, rail maintenance crews, transit authorities, and organizations responsible for railway construction and infrastructure maintenance.
| SKU | Stroke | Bore | Length Without Accessory | Weight Without Accessory | Air Consumption | Inlet Size NPT | Recommended Hose Size | |
|---|---|---|---|---|---|---|---|---|
| in (mm) | in (mm) | in (mm) | lb (kg) | bpm | cfm | in | in (mm) | |
| Fixed-Spike Drivers | ||||||||
| MX60-SD | 5.75" (146) | 2.06" (52.3) | 27.5" (686) | 69 (31.4) | 1,250 | 70 | 3/4" | 3/4" (19) |
| MX90-SD | 5.75" (146) | 2.62" (66.5) | 27.5" (686) | 86 (39) | 1,250 | 85 | 3/4" | 3/4" (19) |
| Vibration-Reduced Flex-Handle Models | ||||||||
| MX60F-SD | 5.75" (146) | 2.06" (52.3) | 27.5" (686) | 69 (31.4) | 1,250 | 70 | 3/4" | 3/4" (19) |
| MX90F-SD | 5.75" (146) | 2.62" (66.5) | 27.5" (686) | 86 (39) | 1,250 | 85 | 3/4" | 3/4" (19) |
Looking for more information about Ingersoll Rand Spike Driver? Click here to view the Catalog
For help selecting the correct Ingersoll Rand Spike Drivers, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
