Ingersoll Rand KM200-15-13 KM Kinetic Series Manual Hoist | 2 Ton Capacity | 15 ft Lift | 13 ft Drop

Ingersoll Rand KM200-15-13 Manual Hoist is a Kinetic Series manual chain hoist designed for controlled hand-operated lifting and load positioning. This 2-ton capacity configuration is rated for 4,400 lbs. and provides 15 ft. of lift with a 13 ft. hand chain drop. Its single chain fall provides a straightforward lifting arrangement for compatible material-handling, maintenance, construction, and equipment installation applications.

The Kinetic Series combines all-steel construction with a reinforced double pawl brake and full bearing construction on the load sprockets and pinion shaft. Premium Grade 100 electro-galvanized chain provides the specified load-chain construction, while the 15 ft. lift gives additional vertical travel for applications that require more reach than a standard 10 ft. configuration. The 13 ft. hand chain drop should be matched to the operator's available working position.

Type: Manual Chain Hoist | Series: Kinetic | Model: KM200-15-13 | Capacity: 2 Ton (4,400 lbs.) | Lift: 15 ft. | Hand Chain Drop: 13 ft. | Chain Falls: 1

Features:

• All-steel construction provides the specified Kinetic Series manual hoist design for compatible lifting applications.
• Reinforced double pawl brake with large-diameter pawl springs provides controlled load handling during manual lifting and positioning.
• Single chain fall provides a straightforward lifting arrangement for the 2-ton capacity.
• Full bearing construction on the load sprockets and pinion shaft supports the manual lifting mechanism.
• Premium Grade 100 electro-galvanized chain provides the specified load-chain construction for the Kinetic Series.
• Heavy-duty cast hook latches are designed to reduce the need for latch replacement.
• The 15 ft. lift provides additional vertical travel for applications requiring a longer lifting distance.
• The Kinetic Series is stated by the manufacturer to meet or exceed ASME B30.16 and HST-2M requirements and is CE certified.

Applications:

• Manual lifting and positioning of loads within the 4,400 lb. rated capacity.
• Industrial maintenance and MRO operations requiring a 2-ton manual chain hoist.
• Equipment installation and material-handling tasks requiring up to 15 ft. of lift.
• Construction applications compatible with a 2-ton single-chain-fall manual hoist.
• Replacement installations where the required capacity, lift, hand-chain drop, and mounting arrangement match the KM200-15-13 configuration.

FAQs:

• Q: What is the capacity of the KM200-15-13?
  A: The hoist is rated for 2 tons, or 4,400 lbs.
• Q: How much lift does the KM200-15-13 provide?
  A: This configuration provides 15 ft. of lift.
• Q: What does the “13” in KM200-15-13 indicate?
  A: The configuration specifies a 13 ft. hand chain drop.
• Q: How many chain falls does the KM200-15-13 use?
  A: This configuration uses one chain fall.
• Q: What type of load chain does the Kinetic Series use?
  A: The Kinetic Series uses premium Grade 100 electro-galvanized load chain.
• Q: Is an overload clutch included with the KM200-15-13?
  A: The supplied KM200-15-13 configuration does not identify an overload clutch as included. An overload-clutch version should be selected when that feature is specifically required.
• Q: What standards are associated with the Kinetic Series?
  A: The manufacturer states that Kinetic Series manual chain hoists meet or exceed ASME B30.16 and HST-2M requirements and are CE certified.
• Q: Is the 15 ft. lift interchangeable with other KM200 configurations?
  A: Kinetic Series hoists are offered in multiple lift and hand-chain-drop configurations. The required lift and drop should be matched to the application before ordering.

 Looking for more information about Ingersoll Rand Manual Chain Hoist? Click here to view the Catalog

Need more feet of chain or a longer pendant hose? How about a motorized trolley? Give us a call at 1-800-608-5210 or email info@intlairtool.com. We can help!