Ingersoll Rand KM200-10-8 KM Kinetic Series Manual Hoist | 2 Ton Capacity | 10 ft Lift | 8 ft Drop

Ingersoll Rand KM200-10-8 Manual Hoist is a Kinetic Series manual chain hoist built for controlled hand-operated lifting and load positioning. This 2-ton capacity configuration is rated for 4,400 lbs. and provides 10 ft. of lift with an 8 ft. hand chain drop. The single-chain-fall configuration provides a straightforward setup for compatible material-handling, maintenance, construction, and equipment installation work.

The Kinetic Series uses all-steel construction, a reinforced double pawl brake, full bearing construction on the load sprockets and pinion shaft, and premium Grade 100 electro-galvanized load chain. These design features support controlled manual load handling while the 10 ft. lift establishes the available vertical travel. The 8 ft. hand chain drop provides operator reach appropriate to installations where the control chain can be accessed from the required working position.

Type: Manual Chain Hoist | Series: Kinetic | Model: KM200-10-8 | Capacity: 2 Ton (4,400 lbs.) | Lift: 10 ft. | Hand Chain Drop: 8 ft. | Chain Falls: 1

Features:

• All-steel construction provides the specified Kinetic Series manual hoist configuration for compatible lifting applications.
• Reinforced double pawl brake with large-diameter pawl springs provides controlled load handling during manual lifting and positioning.
• Single chain fall provides a straightforward lifting arrangement for the 2-ton capacity.
• Full bearing construction on the load sprockets and pinion shaft supports the manual lifting mechanism.
• Premium Grade 100 electro-galvanized chain provides the specified load-chain construction for the Kinetic Series.
• Heavy-duty cast hook latches are designed to reduce the need for latch replacement.
• The 10 ft. lift provides a defined vertical travel configuration for compatible material-handling tasks.
• The Kinetic Series is stated by the manufacturer to meet or exceed ASME B30.16 and HST-2M requirements and is CE certified.

Applications:

• Manual lifting and positioning of loads within the 4,400 lb. rated capacity.
• Industrial maintenance and MRO work requiring a 2-ton manual chain hoist.
• Equipment installation and positioning tasks requiring up to 10 ft. of lift.
• Construction and material-handling operations where a single-chain-fall manual hoist is appropriate.
• Replacement installations where the required capacity, lift, hand-chain drop, and mounting arrangement match the KM200-10-8 configuration.

FAQs:

• Q: What is the capacity of the KM200-10-8?
  A: The hoist is rated for 2 tons, or 4,400 lbs.
• Q: How much lift does the KM200-10-8 provide?
  A: This configuration provides 10 ft. of lift.
• Q: What does the “8” in KM200-10-8 indicate?
  A: The configuration specifies an 8 ft. hand chain drop.
• Q: How many chain falls does the KM200 use?
  A: The KM200-10-8 uses one chain fall.
• Q: What type of load chain does the Kinetic Series use?
  A: The Kinetic Series uses premium Grade 100 electro-galvanized load chain.
• Q: What standards are associated with the Kinetic Series?
  A: The manufacturer states that Kinetic Series manual chain hoists meet or exceed ASME B30.16 and HST-2M requirements and are CE certified.
• Q: Is an overload clutch included with the KM200-10-8?
  A: The supplied SKU does not identify an overload clutch as included. The overload-clutch version should be selected when that feature is specifically required.

 Looking for more information about Ingersoll Rand Manual Chain Hoist? Click here to view the Catalog

Need more feet of chain or a longer pendant hose? How about a motorized trolley? Give us a call at 1-800-608-5210 or email info@intlairtool.com. We can help!