Ingersoll Rand KM150-30-28 KM Kinetic Series Manual Hoist | 1.5 Ton Capacity | 30 ft Lift | 28 ft Drop

Ingersoll Rand KM150-30-28 Manual Hoist is a Kinetic Series manual chain hoist for controlled hand-operated lifting and load positioning. This 1.5-ton capacity configuration is rated for 3,300 lbs. and provides 30 ft. of lift with a 28 ft. hand chain drop. The extended lift gives operators additional vertical reach for compatible material-handling, maintenance, and equipment installation tasks.

The KM150 uses a single chain fall and requires 77.1 lbs. of pull to lift the rated load. Its full bearing construction on the load sprockets and pinion shaft is intended to reduce pull effort during manual operation, while the reinforced double pawl brake provides controlled load handling. Premium Grade 100 electro-galvanized chain is specified for the KM150 at 1.41 lb./ft. The 30 ft. lift and 28 ft. hand chain drop should be matched to the required vertical travel and available operator access.

Type: Manual Chain Hoist | Series: Kinetic | Model: KM150-30-28 | Capacity: 1.5 Ton (3,300 lbs.) | Lift: 30 ft. | Hand Chain Drop: 28 ft. | Chain Falls: 1 | Pull to Lift Rated Load: 77.1 lbs. | Load Chain Weight: 1.41 lb./ft.

Features:

• All-steel construction provides the specified Kinetic Series manual hoist design for compatible lifting applications.
• Reinforced double pawl brake with large-diameter pawl springs provides controlled load handling.
• Single chain fall provides a straightforward lifting arrangement for the 1.5-ton capacity.
• Full bearing construction on the load sprockets and pinion shaft is designed to reduce pull effort during manual operation.
• Premium Grade 100 electro-galvanized chain provides the specified load-chain construction for the Kinetic Series.
• Heavy-duty cast hook latches are designed to reduce the need for latch replacement.
• The 30 ft. lift provides extended vertical travel for applications requiring a longer lifting distance.
• The Kinetic Series is stated by the manufacturer to meet or exceed ASME B30.16 and HST-2M requirements and is CE certified.

Applications:

• Manual lifting and positioning of loads within the 3,300 lb. rated capacity.
• Maintenance and workshop areas requiring a 1.5-ton manual lifting solution with extended vertical travel.
• Equipment installation and material-handling tasks requiring up to 30 ft. of lift.
• Industrial and construction applications compatible with a 1.5-ton manual chain hoist.
• Replacement installations where the required capacity, lift, hand-chain drop, and mounting arrangement match the KM150-30-28 configuration.

FAQs:

• Q: What is the capacity of the KM150-30-28?
  A: The hoist is rated for 1.5 tons, or 3,300 lbs.
• Q: How much lift does the KM150-30-28 provide?
  A: This configuration provides 30 ft. of lift.
• Q: What does the “28” in KM150-30-28 indicate?
  A: The configuration specifies a 28 ft. hand chain drop.
• Q: How many chain falls does the KM150 use?
  A: The KM150 uses one chain fall.
• Q: How much pull is required to lift the rated load?
  A: The manufacturer specifies 77.1 lbs. of pull to lift the rated load for the KM150.
• Q: What type of load chain does the Kinetic Series use?
  A: The Kinetic Series uses premium Grade 100 electro-galvanized load chain, with the KM150 specified at 1.41 lb. per foot.
• Q: Is an overload clutch included with the KM150-30-28?
  A: The manufacturer states that an overload clutch is available on Kinetic Series capacities, but the supplied KM150-30-28 configuration does not identify an overload clutch as included.
• Q: What standards are associated with the Kinetic Series?
  A: The manufacturer states that Kinetic Series manual chain hoists meet or exceed ASME B30.16 and HST-2M requirements and are CE certified.

 Looking for more information about Ingersoll Rand Manual Chain Hoist? Click here to view the Catalog

Need more feet of chain or a longer pendant hose? How about a motorized trolley? Give us a call at 1-800-608-5210 or email info@intlairtool.com. We can help!