Ingersoll Rand KM150-10-8 KM Kinetic Series Manual Hoist | 1.5 Ton Capacity | 10 ft Lift | 8 ft Drop

Ingersoll Rand KM150-10-8 Manual Hoist is a Kinetic Series manual chain hoist for controlled hand-operated lifting and load positioning. This 1.5-ton capacity configuration is rated for 3,300 lbs. and provides 10 ft. of lift with an 8 ft. hand chain drop. With a single chain fall and a specified 77.1 lb. pull to lift the rated load, it provides a practical configuration for compatible material-handling, maintenance, and equipment installation applications.

The Kinetic Series uses all-steel construction, a reinforced double pawl brake, full bearing construction on the load sprockets and pinion shaft, and premium Grade 100 electro-galvanized chain. These features support controlled manual lifting while the 10 ft. lift and 8 ft. hand chain drop provide a defined operating range for installations where those dimensions match the required working area. The manufacturer states that Kinetic Series hoists are CE certified and meet or exceed regional requirements including ASME B30.16 and HST-2M.

Type: Manual Chain Hoist | Series: Kinetic | Model: KM150-10-8 | Capacity: 1.5 Ton (3,300 lbs.) | Lift: 10 ft. | Hand Chain Drop: 8 ft. | Chain Falls: 1 | Pull to Lift Rated Load: 77.1 lbs. | Load Chain Weight: 1.41 lb./ft. | Shipping Weight with 10 ft. Lift: 36 lbs.

Features:

• All-steel construction provides the specified Kinetic Series combination of durability and relatively light weight.
• Reinforced double pawl brake with large-diameter pawl springs provides a dependable braking system for controlled load handling.
• Single chain fall provides a straightforward lifting arrangement for the 1.5-ton capacity.
• Full bearing construction on the load sprockets and pinion shaft is intended to reduce pull effort and support longer service life.
• Premium Grade 100 electro-galvanized chain provides corrosion-resistant load-chain construction.
• Heavy-duty cast hook latches are designed to reduce the need for latch replacement.
• The 10 ft. lift provides a defined vertical travel configuration for compatible lifting tasks.
• CE certification and compliance with or exceeding of ASME B30.16 and HST-2M requirements provide the stated standards basis for the Kinetic Series.

Applications:

• Manual lifting and positioning of loads within the 3,300 lb. rated capacity.
• Maintenance and workshop operations requiring a 1.5-ton manual chain hoist.
• Equipment installation and material-handling tasks requiring up to 10 ft. of lift.
• Industrial and construction applications compatible with a 1.5-ton manual lifting configuration.
• Replacement installations where the required capacity, lift, hand-chain drop, and mounting arrangement match the KM150-10-8.

FAQs:

• Q: What is the capacity of the KM150-10-8?
  A: The hoist is rated for 1.5 tons, or 3,300 lbs.
• Q: How much lift does the KM150-10-8 provide?
  A: This configuration provides 10 ft. of lift.
• Q: What does the “8” in KM150-10-8 indicate?
  A: The configuration specifies an 8 ft. hand chain drop.
• Q: How many chain falls does the KM150 use?
  A: The KM150 uses one chain fall.
• Q: How much pull is required to lift the rated load?
  A: The manufacturer specifies 77.1 lbs. of pull to lift the rated load for the KM150.
• Q: What type of load chain does the Kinetic Series use?
  A: The Kinetic Series uses premium Grade 100 electro-galvanized load chain, specified at 1.41 lb. per foot for the KM150.
• Q: Is an overload clutch included with the KM150-10-8?
  A: The manufacturer states that an overload clutch is available on all Kinetic Series capacities, but the supplied KM150-10-8 configuration does not identify an overload clutch as included.
• Q: What standards are associated with the Kinetic Series?
  A: The manufacturer states that the Kinetic Series is CE certified and meets or exceeds regional requirements including ASME B30.16 and HST-2M.

 Looking for more information about Ingersoll Rand Manual Chain Hoist? Click here to view the Catalog

Need more feet of chain or a longer pendant hose? How about a motorized trolley? Give us a call at 1-800-608-5210 or email info@intlairtool.com. We can help!