Ingersoll Rand KM050-20-18 KM Kinetic Series Manual Hoist | 1/2 Ton Capacity | 20 ft Lift | 18 ft Drop

Ingersoll Rand KM050-20-18 Manual Hoist is a Kinetic Series manual chain hoist designed for controlled hand-operated lifting and load positioning. This 1/2-ton capacity configuration provides 20 ft. of lift with an 18 ft. hand chain drop, making it well suited to compatible lifting applications requiring extended vertical travel. Its single chain fall and manual operation provide a straightforward configuration for material handling, maintenance, and equipment installation.

The KM050 is rated for 1,100 lbs. and requires 51.3 lbs. of pull to lift the rated load. The Kinetic Series features full bearing construction on the load sprockets and pinion shaft for reduced pull effort, along with a reinforced double pawl brake for controlled load handling. Premium Grade 100 electro-galvanized chain provides the specified load-chain construction, while the 20 ft. lift and 18 ft. hand chain drop provide additional reach for applications requiring longer travel.

Type: Manual Chain Hoist | Series: Kinetic | Model: KM050-20-18 | Capacity: 1/2 Ton (1,100 lbs.) | Lift: 20 ft. | Hand Chain Drop: 18 ft. | Chain Falls: 1 | Pull to Lift Rated Load: 51.3 lbs. | Load Chain Weight: 1.01 lb./ft.

Features:

• All-steel construction provides the Kinetic Series manual hoist with a durable, compact lifting design.
• Reinforced double pawl brake with large-diameter pawl springs provides the specified braking system for controlled load handling.
• Single chain fall provides a straightforward lifting arrangement for the 1/2-ton capacity.
• Full bearing construction on the load sprockets and pinion shaft is designed to reduce pull effort during manual operation.
• Premium Grade 100 electro-galvanized chain is designed for corrosion resistance and increased durability.
• Heavy-duty cast hook latches are designed for reduced latch replacement requirements.
• The 20 ft. lift provides extended vertical travel for compatible applications requiring a longer lifting distance.
• The Kinetic Series is CE certified and is stated by the manufacturer to meet or exceed regional requirements including ASME B30.16 and HST-2M.

Made in USA:

Applications:

• Manual lifting and positioning of loads within the 1,100 lb. rated capacity.
• Maintenance and workshop areas requiring extended lifting distance.
• Equipment installation and material-handling tasks requiring up to 20 ft. of lift.
• Industrial and construction applications compatible with a 1/2-ton manual chain hoist.
• Replacement installations where the required capacity, lift, hand-chain drop, and mounting arrangement match the KM050-20-18 configuration.

FAQs:

• Q: What is the capacity of the KM050-20-18?
  A: The hoist is rated for 1/2 ton, or 1,100 lbs.
• Q: How much lift does the KM050-20-18 provide?
  A: This configuration provides 20 ft. of lift.
• Q: What does the “18” in KM050-20-18 indicate?
  A: The configuration specifies an 18 ft. hand chain drop.
• Q: How many chain falls does the KM050 use?
  A: The KM050 uses one chain fall.
• Q: How much pull is required to lift the rated load?
  A: The manufacturer specifies 51.3 lbs. of pull to lift the rated load for the KM050.
• Q: What type of load chain does the Kinetic Series use?
  A: The Kinetic Series uses premium Grade 100 electro-galvanized load chain designed for corrosion resistance and increased durability.
• Q: Is an overload clutch included with the KM050-20-18?
  A: The manufacturer states that an overload clutch is available on all Kinetic Series capacities, but the supplied KM050-20-18 configuration does not identify an overload clutch as included.
• Q: What standards are associated with the Kinetic Series?
  A: The manufacturer states that Kinetic Series manual chain hoists meet or exceed ASME B30.16 and HST-2M requirements and are CE certified.

 Looking for more information about Ingersoll Rand Manual Chain Hoist? Click here to view the Catalog

Need more feet of chain or a longer pendant hose? How about a motorized trolley? Give us a call at 1-800-608-5210 or email info@intlairtool.com. We can help!