Ingersoll Rand KM050-15-13 KM Kinetic Series Manual Hoist | 1/2 Ton Capacity | 15 ft Lift | 13 ft Drop

Ingersoll Rand KM050-15-13 Manual Hoist is a Kinetic Series manual chain hoist designed for controlled hand-operated lifting and load positioning. This 1/2-ton capacity configuration provides 15 ft. of lift with a 13 ft. hand chain drop, giving operators additional vertical reach for compatible material-handling, maintenance, and equipment installation applications.

The KM050 is rated for 1,100 lbs. and requires 51.3 lbs. of pull to lift the rated load. Its single chain fall, full bearing construction on the load sprocket and pinion shaft, and reinforced double pawl brake provide the specified Kinetic Series configuration for manual load handling. The 15 ft. lift and 13 ft. hand chain drop should be matched to the required lifting distance and available operator access.

Type: Manual Chain Hoist | Series: Kinetic | Model: KM050-15-13 | Capacity: 1/2 Ton (1,100 lbs.) | Lift: 15 ft. | Hand Chain Drop: 13 ft. | Chain Falls: 1 | Pull to Lift Rated Load: 51.3 lbs. | Load Chain Weight: 1.01 lb./ft.

Features:

• All-steel construction provides a durable manual hoist design for compatible lifting applications.
• Reinforced double pawl brake with large-diameter pawl springs provides the Kinetic Series brake configuration.
• Single chain fall provides a straightforward lifting arrangement for the 1/2-ton capacity.
• Full bearing construction on the load sprocket and pinion shaft is designed to reduce pull effort during manual operation.
• Premium Grade 100 electro-galvanized chain is specified for the Kinetic Series load chain.
• Heavy-duty cast hook latches are designed for reduced latch replacement requirements.
• The 15 ft. lift provides additional vertical travel compared with shorter-lift configurations.
• The Kinetic Series is CE certified and is stated by the manufacturer to meet or exceed applicable requirements including ASME B30.16 and HST-2M.

Made in USA:

Applications:

• Manual lifting and positioning of loads within the 1,100 lb. rated capacity.
• Maintenance and workshop areas requiring a longer lifting distance.
• Equipment installation and material-handling tasks requiring up to 15 ft. of lift.
• Industrial and construction applications compatible with a 1/2-ton manual chain hoist.
• Replacement installations where the required capacity, lift, hand-chain drop, and mounting arrangement match the KM050-15-13 configuration.

FAQs:

• Q: What is the capacity of the KM050-15-13?
  A: The hoist is rated for 1/2 ton, with the manufacturer specifying a 1,100 lb. rated capacity.
• Q: How much lift does the KM050-15-13 provide?
  A: This configuration provides 15 ft. of lift.
• Q: What does the “13” in KM050-15-13 indicate?
  A: The configuration specifies a 13 ft. hand chain drop.
• Q: How many chain falls does the KM050 use?
  A: The KM050 uses one chain fall.
• Q: How much pull is required to lift the rated load?
  A: The manufacturer specifies 51.3 lbs. of pull to lift the rated load for the KM050.
• Q: What is the load-chain weight for the KM050?
  A: The manufacturer specifies a load-chain weight of 1.01 lb. per foot.
• Q: Is an overload clutch included with the KM050-15-13?
  A: The manufacturer states that an overload clutch is available on all Kinetic Series capacities, but the supplied KM050-15-13 configuration does not identify an overload clutch as included.
• Q: What standards are associated with the Kinetic Series?
  A: The manufacturer states that Kinetic Series manual chain hoists meet or exceed ASME B30.16 and HST-2M requirements and are CE certified.

 Looking for more information about Ingersoll Rand Manual Chain Hoist? Click here to view the Catalog

Need more feet of chain or a longer pendant hose? How about a motorized trolley? Give us a call at 1-800-608-5210 or email info@intlairtool.com. We can help!