Ingersoll Rand KM025-20-18 KM Kinetic Series Manual Hoist | 1/4 Ton Capacity | 20 ft Lift | 18 ft Drop

Ingersoll Rand KM025-20-18 Manual Hoist is a Kinetic Series manual chain hoist designed for controlled hand-operated lifting and load positioning. This 1/4-ton capacity configuration provides 20 ft. of lift with an 18 ft. hand chain drop, giving operators additional reach for lifting tasks that require a longer travel distance. Its single chain fall and manual operation make it suitable for compatible material-handling, maintenance, and equipment installation applications.

The KM025 is rated for 550 lbs. and requires 41.8 lbs. of pull to lift the rated load. The Kinetic Series incorporates full bearing construction on the load sprocket and pinion shaft to support manual operation, along with a reinforced double pawl brake for controlled load handling. The 20 ft. lift and 18 ft. hand chain drop should be matched to the required lifting distance and available operator access.

Type: Manual Chain Hoist | Series: Kinetic | Model: KM025-20-18 | Capacity: 1/4 Ton (550 lbs.) | Lift: 20 ft. | Hand Chain Drop: 18 ft. | Chain Falls: 1 | Pull to Lift Rated Load: 41.8 lbs. | Load Chain Weight: 0.25 lb./ft.

Features:

• All-steel construction provides a compact manual hoist design for compatible lifting applications.
• Reinforced double pawl brake with large-diameter pawl springs provides controlled load handling.
• Single chain fall provides a straightforward lifting arrangement for the 1/4-ton capacity.
• Full bearing construction on the load sprocket and pinion shaft is designed to reduce pull effort during manual operation.
• Premium Grade 100 electro-galvanized chain provides the specified load-chain construction for the Kinetic Series.
• Heavy-duty cast hook latches are designed to reduce the need for latch replacement.
• The extended 20 ft. lift provides additional vertical travel for applications requiring greater lifting distance.
• The Kinetic Series is stated by the manufacturer to meet or exceed ASME B30.16 and HST-2M requirements and is CE certified.

Made in USA:

Applications:

• Manual lifting and positioning of loads within the 550 lb. rated capacity.
• Maintenance and workshop areas requiring a longer lifting distance.
• Equipment installation and material-handling tasks requiring up to 20 ft. of lift.
• Industrial and construction applications compatible with a 1/4-ton manual chain hoist.
• Replacement installations where the required lift and hand-chain drop match the KM025-20-18 configuration.

FAQs:

• Q: What is the capacity of the KM025-20-18?
  A: The hoist is rated for 1/4 ton, with the manufacturer specifying a 550 lb. rated capacity.
• Q: How much lift does the KM025-20-18 provide?
  A: This configuration provides 20 ft. of lift.
• Q: What does the “18” in KM025-20-18 indicate?
  A: The configuration specifies an 18 ft. hand chain drop.
• Q: How many chain falls does the KM025 use?
  A: The KM025 uses one chain fall.
• Q: How much pull is required to lift the rated load?
  A: The manufacturer specifies 41.8 lbs. of pull to lift the rated load for the KM025.
• Q: Is an overload clutch included with the KM025-20-18?
  A: The manufacturer states that an overload clutch is available on Kinetic Series capacities, but the supplied KM025-20-18 configuration does not identify an overload clutch as included.
• Q: What standards are associated with the Kinetic Series?
  A: The manufacturer states that Kinetic Series manual chain hoists meet or exceed ASME B30.16 and HST-2M requirements and are CE certified.

Looking for more information about Manual Chain Hoist? Click here to view the Catalog.

For help selecting the correct Manual Chain Hoists for your assembly application, call (800) 608-5210 or email info@intlairtool.com