Ingersoll Rand HH1-214T-9 Bushing Tool | 9" Length | 0.58 Hex Shank Oval Collar

Concrete leveling and surface roughening require a different working tool from the chisels used for general demolition. The Ingersoll Rand HH1-214T-9 Bushing Tool is a pneumatic chipping hammer accessory intended for concrete leveling and roughing. It features a 9-inch length, 0.58-inch hex shank, and oval collar for use with compatible chipping hammers. Its bushing head has a multi-point working face that delivers repeated localized impacts to roughen concrete surfaces and remove uneven material. This makes it useful for preparing concrete surfaces during renovation, repair, and maintenance operations where a textured finish is required instead of a conventional chisel cut.

With a manufacturer-listed 2.5 lb weight, the HH1-214T-9 combines a relatively short working steel with a specialized surface-treatment head. The hexagonal shank provides the connection profile required by matching hammer barrels, while the oval collar works with the corresponding steel-retention arrangement. Unlike the HH1-215T-9, which uses a round shank with an oval collar, this version features a hex shank. Both perform the same general concrete preparation function, but their different shank geometries determine which chipping hammers can accept them. Verifying the shank and collar configuration before ordering helps prevent incorrect replacement steel selection.

Type: Pneumatic Chipping Hammer Bushing Tool | Manufacturer: Ingersoll Rand | Part Number: HH1-214T-9 | Tool Style: Bushing Tool | Length: 9" | Shank Type: Hex | Shank Size: 0.58" | Collar Type: Oval | Weight: 2.5 lbs | Catalog Box Quantity: 1 | Application: Concrete Leveling and Roughing

Features:

• Specialized bushing tool head is intended for leveling and roughening concrete surfaces.
• Multi-point working face produces localized impacts to help create a roughened concrete texture.
• 0.58-inch hex shank matches the shank geometry required by compatible pneumatic chipping hammers.
• Oval collar configuration provides the specified interface for the corresponding hammer retention system.
• 9-inch accessory length supports localized concrete preparation and surface correction work.
• 2.5 lb catalog weight provides an additional reference when identifying the correct replacement tool steel.
• Listed in the Ingersoll Rand Chipping Hammer Steels range alongside round-shank and round-collar alternatives.

Note: Other Ingersoll Rand Steels and accessories include Moil Points, Ground Rod Driver, Spark-Resistant Chisels, Flat Chisel, Blanks, Capes, Gouges, Round Noses, Fullers, Caulkings, Tooth Chisels, Paper Box Stripping Chisels, Jack Rods, Bits, Diamond Points, Clay Spades, Couplers, Cutters, Hoses, Lock Clips, Lock Springs, Retainers, Rubber Bumpers, Shanks and Washers etc.

Applications:

• Concrete surface leveling – chipping localized high spots and uneven areas with a compatible pneumatic chipping hammer.
• Concrete repair preparation – roughening existing concrete before repair materials are applied, subject to the required surface preparation specifications.
• Commercial renovation – treating concrete floors, walls, and other accessible surfaces requiring localized texture correction.
• Industrial facility maintenance – preparing deteriorated or uneven concrete areas for subsequent repair work.
• Construction surface preparation – producing a roughened surface finish where a bushing tool is more appropriate than a flat chisel or moil point.

FAQs:

• Q: What is the Ingersoll Rand HH1-214T-9 Bushing Tool used for?

  A: It is used for concrete leveling and roughing. Its multi-point working face acts on the concrete through repeated hammer impacts, helping remove surface irregularities and create a roughened texture.

• Q: What is the difference between the HH1-214T-9 and HH1-215T-9?

  A: Both are 9-inch bushing tools with oval collars and a catalog weight of 2.5 lbs. The HH1-214T-9 has a 0.58-inch hex shank, while the HH1-215T-9 has a 0.68-inch round shank. Choose the model that matches the chipping hammer's barrel and retainer configuration.

• Q: Can this bushing tool be used with any pneumatic chipping hammer?

  A: No. The hammer must accept the specified 0.58-inch hex shank and oval collar. Verify the manufacturer's accessory and retainer requirements before installation.

• Q: How is a bushing tool different from a scaling chisel?

  A: A bushing tool has a textured, multi-point working face for roughening and leveling concrete. A scaling chisel uses a blade-like edge for chipping and removing surface material. The appropriate accessory depends on the required surface treatment.

• Q: How many HH1-214T-9 bushing tools are listed per manufacturer box?

  A: Ingersoll Rand lists a catalog box quantity of one for this part number. Confirm the distributor's selling unit before purchasing.

Looking for more information about Ingersoll Rand Bushing Tool? Click here to view the Catalog

For help selecting the correct Ingersoll Rand Bushing Tools, please call (800) 608-5210 or email info@intlairtool.com