Ingersoll Rand 6AKST4 Pistol Grip Air Production Drill | 0.51 HP | 3,100 RPM | 45.1 (in-lbs) Max Torque | Trigger-Start

Built for production drilling, assembly work, and industrial maintenance, the Ingersoll Rand 6AKST4 Pistol Grip Air Drill delivers 45.1 in-lbs (5.1 Nm) of maximum working torque with a 3,100 RPM free speed. This speed-and-torque combination supports repetitive drilling where fast cycle times and controlled material removal are important, while the compact pistol-grip configuration provides straightforward handling around workpieces and fixtures.

The 1/4" (6 mm) bit holder capacity accommodates compatible smaller-diameter drilling tooling, while 20 CFM (560 L/min) air consumption helps buyers plan the required compressed-air supply. At only 2.2 lb (1.0 kg), the 6AKST4 keeps tool weight manageable during repetitive drilling in manufacturing, fabrication, and maintenance environments.

Type: Pistol Grip Air Drill | Series: 6 Series | Model: 6AKST4 | Actuation: Trigger Start | Max. Working Torque: 45.1 in-lbs (5.1 Nm) | Free Speed: 3,100 RPM | Bit Holder Capacity: 1/4" (6 mm) | Air Consumption: 20 CFM (560 L/min) | Weight with Chuck: 2.2 lb (1.0 kg) | Length with Chuck: 7.0" (178 mm) | Side-to-Center Distance: 0.8" (21 mm)

Features:

• 3,100 RPM free speed supports efficient drilling cycles in repetitive production and assembly operations.
• 45.1 in-lbs (5.1 Nm) maximum working torque provides useful turning force for compatible drilling tasks.
• 1/4" (6 mm) bit holder capacity accommodates compatible drilling tooling within the specified size range.
• Trigger-start configuration puts tool actuation directly at the pistol-grip handle.
• 7.0" (178 mm) length with chuck provides a compact overall profile for working around fixtures and components.
• 2.2 lb (1.0 kg) weight with chuck helps reduce unnecessary tool bulk during repetitive handheld drilling.
• 0.8" (21 mm) side-to-center distance allows drilling relatively close to workpiece edges and adjacent surfaces.

Tech Tip: To increase tool performance, extend tool life and lessen repair costs use it with a Filter-Regulator-Lubricator (FRLs)

Made in USA: 

Applications:

• Production and assembly stations performing repetitive small-hole drilling.
• Metal fabrication work using compatible 1/4" drilling tooling.
• Industrial maintenance and MRO tasks involving machinery, fixtures, and equipment components.
• Manufacturing operations where a compact, higher-speed pneumatic drill fits the production process.
• Professional repair and fabrication shops equipped with an appropriately sized compressed-air system.

FAQs:

• Q: How much torque does the Ingersoll Rand 6AKST4 provide?
  A: The 6AKST4 is rated for 45.1 in-lbs (5.1 Nm) of maximum working torque. Its combination of torque and 3,100 RPM free speed makes it suited to compatible production and assembly drilling operations.
• Q: What size tooling does the 6AKST4 accept?
  A: The specification table lists a maximum bit holder capacity of 1/4" (6 mm). Tooling should fit the holder correctly and be appropriate for the material and drilling operation.
• Q: How much compressed air does the 6AKST4 consume?
  A: The manufacturer table specifies 20 CFM (560 L/min). The facility air system should be capable of supplying adequate airflow at the tool during operation.
• Q: Is the 6AKST4 suitable for repetitive production drilling?
  A: Yes. Its pistol-grip configuration, 3,100 RPM speed, compact dimensions, and 2.2 lb weight make it applicable to compatible repetitive drilling tasks at production and assembly stations.
• Q: How does the 6AKST4 compare with the 6AJJST4?
  A: The 6AKST4 trades some rotational speed for additional torque. The 6AKST4 is rated at 3,100 RPM and 45.1 in-lbs, while the 6AJJST4 is listed at 3,950 RPM and 35 in-lbs; both have a 1/4" bit holder capacity.

Looking for more information about the Ingersoll Rand Drill? Click here to view the Catalog

For help choosing the proper Ingersoll Rand Drills for your assembly application, please email info@intlairtool.com or call (800) 608-5210