Ingersoll Rand 4152-HL Random Orbital Air Sander | 3/32" Orbit Diameter | 6" Pad Diameter | 12000 RPM | Rear Exhaust

Built for fine finishing, paint preparation, repair bays, and surface prep work, the Ingersoll Rand 4152-HL Random Orbital Air Sander uses a 3/32" orbit diameter, 6" hook-and-loop pad, and 12,000 RPM free speed to produce a smooth sanding pattern with controlled material removal. The smaller 3/32" orbit is suited for finish sanding where surface quality matters more than aggressive stock removal.

This vacuum-ready, low-vibration sander connects to compatible central or portable vacuum systems to help extract dust and particles through and around the pad. By helping keep foreign matter away from the motor and work surface, the 4152-HL supports cleaner sanding, smoother operation, and better finish control during repeated shop use.

Type: Random Orbital Air Sander | Model: 4152-HL | SKU: 4152-HL | Power: 0.2 HP | Free Speed: 12,000 RPM | Orbit Diameter: 3/32" | Pad Diameter: 6" | Pad Face: Hook and Loop | Vacuum Ready: Yes | Exhaust: Rear | Output Thread: 5/16"-24 | Shroud Style: Short | Weight: 1.92 lbs | Length: 7.48" | Vibration: 7 m/s² | Sound Pressure: 81.6 dBA | Min Hose Size: 5/16" | Air Inlet: 1/4" NPT | Average Air Consumption: 8 CFM

Features:

• Vacuum-ready design connects to compatible central or portable vacuum systems for cleaner sanding and dust extraction.
• Extracts dust and particles through and around the pad to help keep foreign matter away from the motor.
• 12,000 RPM motor with a 3/32" orbit supports fine finishing and smooth surface preparation when used with the correct abrasive disc.
• 6" hook-and-loop pad allows fast abrasive disc changes for shops that move through multiple grits during prep and finishing work.
• Rear exhaust helps direct air away from the sanding path while the short shroud supports dust collection around the pad.
• Low-vibration operation helps support better control during extended sanding sessions.
• Durable construction is built to withstand normal drops and harsh shop conditions.

Made in USA: 

Applications:

• Automotive refinishing — final sanding, feather edging, and panel preparation before primer, sealer, or paint.
• Paint prep and finishing — creating a smoother sanding pattern where a finer 3/32" orbit is preferred.
• Body shop repair work — finishing filler, blending repair areas, and preparing panels for coating steps.
• Fiberglass and composite repair — smoothing repaired sections, molded surfaces, and coating-ready panels.
• Woodworking and cabinet work — finish sanding flat or lightly contoured surfaces with a 6" random orbital sander.
• DIY garage and restoration work — controlled sanding and refinishing tasks with a properly sized compressed air supply.

FAQs:

• Q: What is the benefit of the 3/32" orbit on the Ingersoll Rand 4152-HL?
  A: The 3/32" orbit creates a finer sanding action than a larger orbit sander. It is useful for finishing, paint preparation, and applications where a smoother surface pattern is more important than fast material removal.
• Q: What does “hook and loop” mean on this sander?
  A: Hook and loop refers to the pad face used with compatible hook and loop abrasive discs. It allows quick disc changes without adhesive, which is helpful when switching grits during multi-step sanding work.
• Q: Is the 4152-HL vacuum ready?
  A: Yes. This model is vacuum-ready and can connect to compatible central or portable vacuum systems to help remove dust and particles during sanding.
• Q: What abrasive discs should be used with this model?
  A: Use 6" hook-and-loop abrasive discs that match the sanding task. Replacement pads should also match the 5/16"-24 output thread and be suitable for the tool’s 12,000 RPM free speed.
• Q: What air setup is required for this tool?
  A: The 4152-HL uses a 1/4" NPT air inlet, requires a 5/16" minimum hose size, and has an average air consumption of 8 CFM. Use an air supply that can maintain steady airflow during continuous sanding.

Looking for more information about Ingersoll Rand Air Sander? Click here to view the Catalog.

For help selecting the correct Ingersoll Rand Air Sanders or your assembly application, call (800) 608-5210 or email info@intlairtool.com