Ingersoll Rand 2115QTiMAX Impact Wrench | 1/2" Drive Size | 15000 RPM | 300 ft-lbs Max Torque

For automotive technicians and maintenance crews who need impact-wrench power in confined work areas, the Ingersoll Rand 2115QTiMAX Pneumatic Impact Wrench combines a compact pistol-grip design with a 3/8-inch square drive and 15,000 RPM maximum free speed. The manufacturer specifies 300 ft-lbs (407 Nm) maximum reverse torque and 250 ft-lbs (339 Nm) maximum forward torque, providing distinct ratings for fastener removal and tightening. Part of the Ingersoll Rand TiMAX family, this air impact wrench is suited to vehicle repair, body shops, mechanical maintenance, and other applications where fastener access and controlled operation are important.

The 2115QTiMAX features a finely tuned twin-hammer impact mechanism, a seven-vane air motor, and a titanium hammer case with composite housing. Its friction-ring anvil helps retain compatible impact sockets while allowing convenient changes between fastener sizes. A feather-touch trigger provides responsive speed control, and the patented one-hand forward/reverse control simplifies direction changes during disassembly and reassembly. Measuring approximately 6 inches (152 mm) long and weighing 2.48 lbs (1.12 kg), the wrench is designed to reduce bulk when working around closely spaced components. Its quiet-tool configuration also distinguishes it from the standard 2115TiMAX model.

Type: Pneumatic Impact Wrench | Manufacturer: Ingersoll Rand | Model: 2115QTiMAX | Configuration: Pistol Grip | Actuation: Trigger | Drive Size: 3/8" | Drive Type: Square, Friction Ring | Impact Mechanism: Twin Hammer | Motor: 7-Vane | Maximum Forward Torque: 250 ft-lbs (339 Nm) | Maximum Reverse Torque: 300 ft-lbs (407 Nm) | Free Speed: 15,000 RPM | Blows Per Minute: 1,500 | Tool Weight: 2.48 lbs (1.12 kg) | Overall Length: 6" (152 mm) | Air Inlet: 1/4" NPT | Minimum Hose Size: 3/8" | Air Consumption at Load: 17 CFM | Average Air Consumption: 4 CFM | Operating Pressure: 90 PSI (6.2 bar) | Impacting Sound Pressure: 93.2 dB(A) | Vibration Level: 7.8 m/s² (K = 1.8 m/s²)

Features:

• Compact pistol-grip configuration supports tool positioning in restricted automotive and mechanical service areas.
• 3/8-inch square drive accepts compatible impact-rated sockets for threaded fastener installation and removal.
• Finely tuned twin-hammer mechanism delivers repeated rotational impacts for effective fastening and loosening.
• Seven-vane motor provides the manufacturer's specified power delivery in a lightweight tool configuration.
• Titanium hammer case and composite housing protect the impact mechanism while keeping tool weight manageable.
• Feather-touch trigger allows operators to regulate tool response during fastener engagement and rundown.
• Patented one-hand forward/reverse control allows convenient direction changes during repair work.
• Friction-ring socket retention helps secure compatible impact sockets during operation.
• Accessible grease fitting simplifies routine mechanism lubrication and maintenance.
• Quiet-tool design provides lower published free-speed sound levels than the standard 2115TiMAX configuration.

Tech Tip: To increase tool performance, extend tool life and lessen repair costs use it with a Filter-Regulator-Lubricator (FRLs)

Applications:

• Automotive repair – removing and installing suitable bolts around engine accessories, brackets, and mechanical assemblies.
• Collision repair and body shops – handling repeated fastener removal and installation during vehicle disassembly.
• Fleet maintenance – servicing threaded connections on vehicles and equipment using compatible 3/8-inch impact sockets.
• Industrial MRO – maintaining machinery components where a compact pneumatic impact wrench offers better access than a larger tool.
• Equipment refurbishment – supporting mechanical disassembly and reassembly within the wrench's rated torque capabilities.

FAQs:

• Q: What is the actual drive size of the Ingersoll Rand 2115QTiMAX? A: Ingersoll Rand specifies a 3/8-inch square drive with friction-ring socket retention. The 1/2-inch drive listed in the supplied product title is incorrect for this model.
• Q: What are the correct speed and torque ratings? A: The manufacturer lists 15,000 RPM free speed, 300 ft-lbs maximum reverse torque, and 250 ft-lbs maximum forward torque. The supplied title's 8,000 RPM and 550 ft-lbs figures do not match the manufacturer's 2115QTiMAX specification table.
• Q: What makes the 2115QTiMAX different from the 2115TiMAX? A: Both have a 3/8-inch square drive, the same published torque ratings, speed, weight, and length. The 2115QTiMAX is the quiet-tool configuration and has lower published free-speed sound measurements.
• Q: Which model should I consider for a 1/2-inch drive? A: The related Ingersoll Rand 2125QTiMAX uses a 1/2-inch square drive with friction-ring retention. Its manufacturer-listed maximum reverse torque is 332 ft-lbs and its maximum free speed is 15,000 RPM. Select the drive size that matches your impact socket requirements.
• Q: Can I use the 2115QTiMAX for final torque tightening? A: The impact wrench can tighten suitable threaded fasteners, but its power settings are not calibrated final torque measurements. Use a calibrated torque wrench or approved tightening procedure when a fastener requires a specified final torque.