Dotco 15LF283-62 Light Duty Head Right Angle Pneumatic Drill | 15LF Series | 0.4 HP | 3,300 RPM | Composite Housing | Rear Exhaust

Built for controlled drilling in tight work areas, the Dotco 15LF283-62 Right Angle Pneumatic Drill combines a compact 90-degree head with a 0.4 HP motor and a 3,300 RPM free speed for applications where access, torque, and drilling control matter more than maximum speed. The right-angle configuration helps reach around frames, fixtures, panels, and machinery where straight drills are difficult to position. Its composite housing helps reduce tool weight during repetitive work, while the rear exhaust directs discharged air away from the operator and work surface.

The -62 configuration uses a 1/4"-28 internal thread termination for compatible Dotco angle head assemblies. Compared with higher-speed 15LF models, the 3,300 RPM rating provides a more controlled drilling speed for larger bits, tougher materials, or applications where feed control is important. A high-efficiency motor and gear train support consistent pneumatic performance, and the lock-off safety lever helps reduce unintended throttle activation during handling.

Type: Right Angle Pneumatic Drill | Series: 15LF Series | Power: 0.4 HP (0.30 kW) | Free Speed: 3,300 RPM | Termination: 1/4"-28 Internal Thread (-62) | Housing: Composite | Exhaust: Rear | Overall Length: 10.7 in. (272 mm) | Air Inlet: 1/4 in. | Minimum Hose I.D.: 1/4 in.

Features:

• Light-duty small-head right-angle configuration helps reach confined drilling locations.
• High-efficiency motor and gear train provide steady pneumatic drilling performance.
• 3,300 RPM free speed supports controlled drilling where lower speed and greater feed control are preferred.
• Composite housing helps reduce tool weight for repetitive production and maintenance work.
• Rear exhaust directs spent air away from the operator and workpiece.
• Lock-off safety lever helps reduce accidental starts during handling.
• Standard -62 configuration with 1/4"-28 internal thread termination for compatible Dotco angle heads.

Made in USA:

Applications:

• Aerospace assembly and maintenance where compact right-angle access is required.
• Metal fabrication, fixture drilling, and production assembly work.
• Transportation equipment manufacturing and service around frames, panels, and brackets.
• Industrial maintenance and MRO drilling in machinery, guards, and structural components.
• Workshop and repair environments requiring controlled pneumatic drilling in tight spaces.

FAQs:

• Q: When should I choose the 3,300 RPM version?
  A: Choose this model when drilling control is more important than maximum speed, especially when using larger drill bits or working with materials that require a slower feed rate.
• Q: What does the right-angle head help with?
  A: The 90-degree head allows the drill to reach into confined areas where a straight or pistol-grip drill cannot fit comfortably.
• Q: What does the "-62" designation mean?
  A: The -62 version uses a 1/4"-28 internal thread termination for compatible Dotco angle head assemblies.
• Q: What air hose size should be used?
  A: The manufacturer lists a 1/4-inch air inlet and a minimum 1/4-inch inside diameter air hose for proper airflow.

Looking for more information about Dotco Drill? Click here to view the Catalog

Need help selecting the correct Dotco Drills for your application? Please call (800) 608-5210 or email info@intlairtool.com