Built for controlled hole-making in production, fabrication, and assembly work, the Dotco 14CFS96-51 non-reversible pneumatic drill delivers a balanced combination of 0.4 HP power and 700 RPM free speed for applications where accuracy, repeatability, and tool control matter. Its 3/8" chuck accepts common drill bits for general drilling tasks, while the non-reversible design keeps operation straightforward for dedicated forward-drilling applications.
Part of the 14CF Series, this Dotco air drill uses a lightweight composite housing to reduce hand fatigue during repeated drilling cycles. The molded grip profile helps guide the operator’s hand position, making the tool a practical choice for aerospace assembly, metal fabrication, woodworking, and industrial maintenance environments that require dependable pneumatic drilling performance.
Type: Pneumatic Drill | Series: 14CF Series | Model: 14CFS96-51 | Operation: Non-Reversible | Power: 0.4 HP | Free Speed: 700 RPM | Chuck Capacity: 3/8" | Housing: Composite
Features:
- 0.4 HP pneumatic motor supports controlled drilling in production and maintenance settings.
- 700 RPM free speed provides a moderate drilling pace for accuracy-focused applications.
- 3/8" chuck accommodates commonly used drill bits for shop and assembly work.
- Non-reversible configuration is suited for dedicated forward-drilling operations.
- Composite housing helps reduce tool weight during repeated drilling cycles.
- Molded grip design supports steady handling and improved control.
Made in USA: 
Applications:
- Aerospace assembly work requiring controlled pneumatic drilling.
- Metal fabrication shops drilling steel, aluminum, and other workpieces.
- Woodworking operations where a compact air drill is preferred.
- Industrial maintenance departments performing routine drilling tasks.
- Production environments with repetitive forward-drilling requirements.
FAQs:
- Q: Is the Dotco 14CFS96-51 reversible?
A: No. This model is non-reversible and is intended for forward drilling only. - Q: What chuck size does this drill use?
A: The 14CFS96-51 is equipped with a 3/8" chuck for use with compatible drill bits. - Q: What does 700 RPM mean for drilling?
A: The 700 RPM free speed gives the tool a controlled drilling rate, which is useful when accuracy and steady bit control are more important than high-speed drilling. - Q: What type of work is this drill used for?
A: It is commonly used for production drilling, fabrication, aerospace assembly, woodworking, and general industrial maintenance tasks.
| SKU | Termination | Free Speed (rpm) | Exhaust | Weight | Weight (kg) | Length | Length (mm) |
|---|---|---|---|---|---|---|---|
| Lb | in | ||||||
| 14CFS90-51 | 3/8“ Chuck | 29000 r/min | Rear | 1.54 | 0.70 kg | 5.7 | 145 mm |
| 14CFS91-51 | 3/8“ Chuck | 5200 r/min | Rear | 1.54 | 0.70 kg | 5.7 | 145 mm |
| 14CFS92-51 | 3/8“ Chuck | 3800 r/min | Rear | 1.54 | 0.70 kg | 5.7 | 145 mm |
| 14CFS93-51 | 3/8“ Chuck | 3200 r/min | Rear | 1.54 | 0.70 kg | 5.7 | 145 mm |
| 14CFS94-51 | 3/8“ Chuck | 2400 r/min | Rear | 1.54 | 0.70 kg | 5.7 | 145 mm |
| 14CFS95-51 | 3/8“ Chuck | 1000 r/min | Rear | 1.76 | 0.80 kg | 6.9 | 175 mm |
| 14CFS96-51 | 3/8“ Chuck | 700 r/min | Rear | 1.76 | 0.80 kg | 6.9 | 175 mm |
| 14CFS97-51 | 3/8“ Chuck | 600 r/min | Rear | 1.76 | 0.80 kg | 6.9 | 175 mm |
Looking for more information about Dotco Drill? Click here to view the Catalog
Need help selecting the correct Dotco Drills for your application? Please call (800) 608-5210 or email info@intlairtool.com
Videos Hide Videos Show Videos
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
