When production drilling calls for a little more speed without moving into high-RPM territory, the Dotco 14CFS95-51 non-reversible pneumatic drill delivers 0.4 HP output with a 1,000 RPM free speed for controlled hole-making in metal, wood, and composite materials. Its 3/8" chuck supports common drill bit sizes, while the 14CF Series composite housing helps keep the tool manageable during repeated drilling cycles.
This forward-only air drill is a practical fit for assembly benches, fabrication departments, maintenance shops, and aerospace production environments where operators need steady bit control and consistent pneumatic performance. The non-reversible configuration simplifies operation for dedicated drilling tasks, and the composite body helps reduce tool weight compared with all-metal housings.
Type: Pneumatic Drill | Series: 14CF Series | Model: 14CFS95-51 | Operation: Non-Reversible | Power: 0.4 HP | Free Speed: 1,000 RPM | Chuck Capacity: 3/8" | Housing: Composite
Features:
- 0.4 HP pneumatic motor provides reliable output for controlled drilling in production and maintenance environments.
- 1,000 RPM free speed supports faster drilling than lower-speed models while maintaining manageable bit control.
- 3/8" chuck accepts common drill bits for general shop, assembly, and fabrication tasks.
- Non-reversible operation is suited for dedicated forward-drilling applications.
- Composite housing helps reduce overall tool weight during repetitive use.
- Compact pistol-grip format supports steady handling at the workbench or on assembled components.
Made in USA: 
Applications:
- Aerospace and aircraft assembly drilling where controlled pneumatic tools are preferred.
- Fabrication shops drilling pilot holes, clearance holes, and fixture components.
- Industrial maintenance teams performing repair, modification, and installation work.
- Woodworking and fixture-building operations using 3/8" chuck air drills.
- Manufacturing cells that require repeatable forward-drilling performance.
FAQs:
- Q: What makes the 14CFS95-51 different from the slower 14CF drill models?
A: This model runs at 1,000 RPM, giving it faster free speed than 600 RPM or 700 RPM versions while still staying controlled for general drilling work. - Q: Can this drill run in reverse?
A: No. The 14CFS95-51 is non-reversible and is intended for forward-drilling operations only. - Q: What drill bits fit this tool?
A: It uses a 3/8" chuck, so it accepts compatible drill bits up to the chuck’s rated capacity. - Q: Is this a good choice for repetitive production drilling?
A: Yes. The composite housing, controlled 1,000 RPM speed, and pneumatic motor make it useful for repeated drilling tasks in assembly, fabrication, and maintenance settings.
| SKU | Termination | Free Speed (rpm) | Exhaust | Weight | Weight (kg) | Length | Length (mm) |
|---|---|---|---|---|---|---|---|
| Lb | in | ||||||
| 14CFS90-51 | 3/8“ Chuck | 29000 r/min | Rear | 1.54 | 0.70 kg | 5.7 | 145 mm |
| 14CFS91-51 | 3/8“ Chuck | 5200 r/min | Rear | 1.54 | 0.70 kg | 5.7 | 145 mm |
| 14CFS92-51 | 3/8“ Chuck | 3800 r/min | Rear | 1.54 | 0.70 kg | 5.7 | 145 mm |
| 14CFS93-51 | 3/8“ Chuck | 3200 r/min | Rear | 1.54 | 0.70 kg | 5.7 | 145 mm |
| 14CFS94-51 | 3/8“ Chuck | 2400 r/min | Rear | 1.54 | 0.70 kg | 5.7 | 145 mm |
| 14CFS95-51 | 3/8“ Chuck | 1000 r/min | Rear | 1.76 | 0.80 kg | 6.9 | 175 mm |
| 14CFS96-51 | 3/8“ Chuck | 700 r/min | Rear | 1.76 | 0.80 kg | 6.9 | 175 mm |
| 14CFS97-51 | 3/8“ Chuck | 600 r/min | Rear | 1.76 | 0.80 kg | 6.9 | 175 mm |
Looking for more information about Dotco Drill? Click here to view the Catalog
Need help selecting the correct Dotco Drills for your application? Please call (800) 608-5210 or email info@intlairtool.com
Videos Hide Videos Show Videos
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
