Dotco 12L1300-36RT Right Angle Router | 12 Series | Gearless Drive | 0.3 HP | 30,000 RPM | Front Exhaust

Built for high-speed trimming, routing, and controlled edge work, the Dotco 12L1300-36RT right angle router pairs a 0.3 HP pneumatic motor with a 30,000 RPM free speed for fast, precise material removal on composites, plastics, laminates, fiberglass, and similar non-ferrous materials. Its gearless drive places the direct-drive motor in the angle head, reducing mechanical complexity while maintaining responsive speed at the cutter. The right-angle layout helps operators reach around fixtures, panels, and tight work areas where inline routers may be difficult to control.

The front exhaust configuration directs spent air forward, while the 1/4" shank capacity supports common router bits used in production trimming and template-guided routing. At only 1.5 lb with a 7.4" overall length, the 12L1300-36RT is a compact choice for repetitive routing operations where speed, access, and handling matter.

Type: Right Angle Router | Series: 12 Series | Drive: Gearless | Power: 0.3 HP (0.22 kW) | Free Speed: 30,000 RPM | Exhaust: Front | Shank Capacity: 1/4" | Weight: 1.5 lb (0.68 kg) | Overall Length: 7.4" (188 mm) | Air Inlet: 1/4"

Features:

• Gearless tool with direct drive motor in the angle head for high-speed routing performance.
• 30,000 RPM free speed supports fast trimming and clean edge work on suitable materials.
• Right angle configuration improves access around fixtures, panels, and confined routing areas.
• 0.3 HP pneumatic motor provides controlled power for precision material removal.
• Front exhaust model directs spent air forward during operation.
• 1/4-inch shank capacity accepts common router bits for trimming and routing applications.
• Compact 1.5 lb body helps reduce handling effort during repetitive production work.

Note: Router Template Guide is not included; it is sold separately.

Made in USA:

Applications:

• Composite fabrication — trimming carbon fiber, fiberglass, and composite panel edges.
• Aerospace production — controlled routing on aircraft components, access panels, and fixture-guided work.
• Plastics and laminate shops — shaping, trimming, and finishing non-ferrous sheet materials.
• Industrial manufacturing — repetitive routing tasks where a compact right-angle tool improves reach.
• Template-guided routing — following jigs and fixtures for repeatable edge profiles and cutouts.

FAQs:

• Q: What does gearless drive mean on this router?
  A: Gearless drive means the tool uses a direct-drive motor in the angle head rather than a geared reduction system. This supports high-speed routing at 30,000 RPM with fewer drive components.
• Q: What bit shank size does the 12L1300-36RT accept?
  A: This model is listed with a 1/4-inch shank diameter capacity. Use compatible router bits rated for the tool speed and material being cut.
• Q: Is this the same as the rear exhaust version?
  A: No. The 12L1300-36RT is the front exhaust version. Rear exhaust models are available separately for applications where exhaust direction is a key operator preference.
• Q: What materials is this router commonly used on?
  A: It is commonly used for routing and trimming composites, plastics, fiberglass, laminates, and similar non-ferrous materials. Always match the cutter type and speed rating to the material and application.

Looking for more information about Dotco Router? Click here to view the Catalog

Need help selecting the correct Dotco Routers for your application? Please call (800) 608-5210 or email info@intlairtool.com