When a high-pressure hose needs powered retrieval without hand cranking, the Coxreels HP1125-5-50-AB gives maintenance teams an HP1125 Series motor rewind reel built for 3/4" I.D. hose and up to 50 ft of hose capacity. This model uses a compressed air #6 Gast motor rewind, which uses plant or service-truck air power to rotate the reel drum and bring hose back onto the reel. With a 4500 PSI maximum pressure rating, it is suited for high-pressure hose storage where the reel, hose, fittings, and media are all properly matched to the system.
The HP1125-5-50-AB is supplied as a less hose reel, allowing buyers to install hose that matches their pressure, media, and fitting requirements. Coxreels' HP1125 Series construction includes a one-piece all-welded steel "A" frame, low-profile outlet riser, and open drum slot design to help promote a flat, smooth hose wrap. Its external fluid path with a 90° full-flow NPT swivel keeps the swivel accessible, while AFLAS swivel seals support high-pressure sealing compatibility in demanding service environments.
*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.
Type: Motorized Hose Reel | Series: HP1125 Series | Model: HP1125-5-50-AB | Rewind Type: Compressed Air #6 Gast Motor Rewind | Configuration: Less Hose | Hose I.D.: 3/4" | Hose O.D.: 1-1/4" | Hose Capacity: 50 ft | Hose Included: No | Max Pressure: 4500 PSI | Ship Weight: 46 lbs | Overall Dimensions: 17.38" W x 19.25" H x 17.63" L | Mounting Pattern: 9.44" M x 10" N | Base: 11.38" X x 16" Y | Swivel: External 90° full-flow NPT swivel inlet | Swivel Material: Electroless nickel plated steel | Swivel Seals: AFLAS
Features:
- Compressed air #6 Gast motor rewind provides powered hose retrieval for installations where manual cranking is not practical or preferred.
- External 90° full-flow NPT swivel with electroless nickel plated steel inlet supports high-pressure flow while keeping the fluid path service-accessible.
- AFLAS swivel seals support high-pressure sealing performance when used with compatible media and system conditions.
- One-piece all-welded steel "A" frame base provides a rigid support structure for shop, truck, skid, or floor-mounted hose reel installations.
- Low-profile outlet riser and open drum slot design help produce a flatter hose wrap and reduce hose crimping during rewind.
- Permanently lubricated, self-aligning pillow block bearings support smooth drum rotation with reduced bearing maintenance requirements.
- Direct gear drive on motor-driven models provides smooth, quiet retraction without a chain drive.
- CPC powder coat finish helps protect the steel reel structure from chips and rust in everyday service environments.
Made in USA: 
Applications:
- High-pressure compressed air service areas where operators need powered hose rewind instead of hand-crank retrieval.
- Fleet maintenance and service truck installations using a compact 50 ft reel for high-pressure hose storage.
- Industrial MRO stations where organized hose handling helps keep work areas cleaner and reduces loose hose on the floor.
- Equipment maintenance bays where 3/4" hose capacity is needed for higher flow than smaller hose reel configurations.
- Pressure washing, spraying, lubrication, or fluid-transfer setups only when the installed hose, fittings, pressure rating, and media compatibility are verified for the job.
FAQs:
- Q: What does "less hose" mean for the HP1125-5-50-AB?
A: "Less hose" means the reel is supplied without hose installed. The customer must select and install compatible 3/4" I.D. hose separately. - Q: What is the difference between the HP1125-5-50-A and HP1125-5-50-AB?
A: Both are HP1125 Series 3/4" x 50 ft, 4500 PSI less-hose motor rewind reels. The HP1125-5-50-AB is listed with a compressed air #6 Gast motor rewind, while the HP1125-5-50-A is listed with a compressed air #4 Gast motor rewind. - Q: Can this reel be mounted on a service truck?
A: Yes, this style of reel can be used on service trucks when the mounting surface is properly reinforced and the installation follows the reel's mounting pattern. Confirm available space using the overall dimensions and mounting dimensions before ordering. - Q: Does the 4500 PSI rating apply to the entire hose system?
A: The reel is rated for 4500 PSI maximum pressure. The installed hose, fittings, swivel, and all connected system components must also be rated for the actual operating pressure and media. - Q: Why choose a #6 Gast air motor rewind?
A: A compressed air motor rewind is useful where air power is already available and powered retrieval is preferred over manual rewind. The #6 Gast motor designation identifies this model's motor option, so it should be matched to the buyer's available air supply and rewind requirements.
| LESS HOSE | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SKU | STANDARD CAP | OPTIONAL CAP. Reducer required |
INLET SWIVEL & OUTLET RISER |
PSI | SKU | HP PSI | APRX. LBS. |
SIZE INDEX |
||||
| I.D. | O.D. | FT. | I.D. | O.D. | FT. | |||||||
| 1125-5-50 | 3/4" | 1 1/4" | 50 | 1/2" | 7/8" | 100 | 3/4" F NPT | 3,000 | HP1125-5-50 | 4,500 | 38 | 6 |
| 1125-5-50-A | 3/4" | 1 1/4" | 50 | 1/2" | 7/8" | 100 | 3/4" F NPT | 3,000 | HP1125-5-50-A | 4,500 | 38 | 6 |
| 1125-5-50-AB | 3/4" | 1 1/4" | 50 | 1/2" | 7/8" | 100 | 3/4" F NPT | 3,000 | HP1125-5-50-AB | 4,500 | 38 | 6 |
| 1125-5-50-C | 3/4" | 1 1/4" | 50 | 1/2" | 7/8" | 100 | 3/4" F NPT | 3,000 | HP1125-5-50-C | 4,500 | 38 | 6 |
| 1125-5-50-E | 3/4" | 1 1/4" | 50 | 1/2" | 7/8" | 100 | 3/4" F NPT | 3,000 | HP1125-5-50-E | 4,500 | 38 | 6 |
| 1125-5-50-EA | 3/4" | 1 1/4" | 50 | 1/2" | 7/8" | 100 | 3/4" F NPT | 3,000 | HP1125-5-50-EA | 4,500 | 38 | 6 |
| 1125-5-50-EB | 3/4" | 1 1/4" | 50 | 1/2" | 7/8" | 100 | 3/4" F NPT | 3,000 | HP1125-5-50-EB | 4,500 | 38 | 6 |
| 1125-5-50-ED | 3/4" | 1 1/4" | 50 | 1/2" | 7/8" | 100 | 3/4" F NPT | 3,000 | HP1125-5-50-ED | 4,500 | 38 | 6 |
| 1125-5-50-EF | 3/4" | 1 1/4" | 50 | 1/2" | 7/8" | 100 | 3/4" F NPT | 3,000 | HP1125-5-50-EF | 4,500 | 38 | 6 |
| 1125-5-50-H | 3/4" | 1 1/4" | 50 | 1/2" | 7/8" | 100 | 3/4" F NPT | 3,000 | HP1125-5-50-H | 4,500 | 38 | 6 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
