Built for service trucks, maintenance areas, equipment skids, and fixed work stations that need powered hose retrieval, the Coxreels 1125-5-50-H is a 1125 Series hydraulic rewind hose reel sized for 3/4" I.D. hose up to 50 ft. The 3000 PSI pressure rating supports properly matched medium-pressure hose applications, while the hydraulic rewind motor helps pull hose back onto the reel where manual cranking is inefficient or where hydraulic power is already available on the vehicle or equipment package.
This reel is supplied less hose and uses Coxreels’ welded steel "A" frame, low-profile outlet riser, and open drum slot design to help the hose wrap flat and reduce crimping during rewind. The 3/4" F NPT inlet swivel and outlet riser match the hose size for straightforward plumbing, and the 17.38" W x 19.25" H x 17.63" L overall dimensions help buyers confirm mounting space before installation.
*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.
Type: Hydraulic Rewind Hose Reel | Series: 1125 Series | Configuration: Less Hose | Rewind Type: Hydraulic Motor | Hydraulic Motor Port: End Ported 9/16-18 UNF | Hose I.D.: 3/4" | Hose O.D.: 1-1/4" | Hose Capacity: 50 ft | Optional Hose Capacity: 1/2" I.D. x 7/8" O.D. x 100 ft, reducer required | Inlet Swivel & Outlet Riser: 3/4" F NPT | Max Pressure: 3000 PSI | Hose Included: No | Ship Weight: 44 lbs | Overall Dimensions: 17.38" W x 19.25" H x 17.63" L | Mounting Pattern: 9.44" M x 10" N | Base: 11.38" X x 16" Y
Features:
- Hydraulic rewind motor supports powered hose retrieval when a hydraulic source is available.
- Machined solid brass 90° full-flow NPT swivel supports smooth fluid flow through the reel.
- Nitrile swivel seals are used on the standard 1125 Series configuration.
- All welded steel “A” frame construction provides a rigid base for fixed, vehicle, and skid mounting.
- Exclusive low-profile outlet riser and open drum slot design help produce a flat, smooth hose wrap.
- Permanently lubricated self-aligning pillow block bearings support smooth rotation with reduced bearing maintenance.
- Adjustable tension brake helps prevent free-wheeling during operation.
- Long-handled locking pin secures the reel from rotation during transport or storage.
- Reliable direct gear drive on motor driven models provides smooth retraction with no chain.
Made in USA: 
Applications:
- Industrial plant and ground maintenance stations that need organized hose storage and powered rewind.
- Service trucks and fleet maintenance vehicles using hydraulic power to retrieve hose after field work.
- Construction sites and equipment maintenance areas where loose hose creates clutter around work zones.
- Farming, agricultural spraying, pest and weed control, and landscape service setups using compatible hose and fittings.
- Pressure washing, washdown, hydro seeding, and high-flow watering applications within the reel’s hose size and pressure rating.
- Chemical fluid transfer applications only when the selected hose, fittings, seals, and fluid path materials are confirmed compatible with the fluid being handled.
FAQs:
- Q: What does "less hose" mean on this Coxreels 1125-5-50-H reel?
A: It means the reel is supplied without hose installed. The buyer must select and install compatible hose separately. - Q: What does the "H" suffix mean?
A: The “H” suffix identifies the hydraulic motor rewind version. This model uses a hydraulic motor with an end ported 9/16-18 UNF connection. - Q: What hose size fits this reel?
A: The standard capacity is 3/4" I.D. x 1-1/4" O.D. hose up to 50 ft. The listed optional capacity is 1/2" I.D. x 7/8" O.D. hose up to 100 ft with a reducer required. - Q: Can this reel be used for hydraulic service?
A: It can be used in compatible medium-pressure applications when the hose, fittings, fluid, seals, and operating pressure are properly matched. Do not exceed the reel’s 3000 PSI maximum pressure rating. - Q: What should be checked before ordering?
A: Confirm available mounting space, hydraulic motor power source, hose diameter, hose length, fitting size, pressure rating, and fluid compatibility before installation.
| LESS HOSE | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SKU | STANDARD CAP | OPTIONAL CAP. Reducer required |
INLET SWIVEL & OUTLET RISER |
PSI | SKU | HP PSI | APRX. LBS. |
SIZE INDEX |
||||
| I.D. | O.D. | FT. | I.D. | O.D. | FT. | |||||||
| 1125-5-50 | 3/4" | 1 1/4" | 50 | 1/2" | 7/8" | 100 | 3/4" F NPT | 3,000 | HP1125-5-50 | 4,500 | 38 | 6 |
| 1125-5-50-A | 3/4" | 1 1/4" | 50 | 1/2" | 7/8" | 100 | 3/4" F NPT | 3,000 | HP1125-5-50-A | 4,500 | 38 | 6 |
| 1125-5-50-AB | 3/4" | 1 1/4" | 50 | 1/2" | 7/8" | 100 | 3/4" F NPT | 3,000 | HP1125-5-50-AB | 4,500 | 38 | 6 |
| 1125-5-50-C | 3/4" | 1 1/4" | 50 | 1/2" | 7/8" | 100 | 3/4" F NPT | 3,000 | HP1125-5-50-C | 4,500 | 38 | 6 |
| 1125-5-50-E | 3/4" | 1 1/4" | 50 | 1/2" | 7/8" | 100 | 3/4" F NPT | 3,000 | HP1125-5-50-E | 4,500 | 38 | 6 |
| 1125-5-50-EA | 3/4" | 1 1/4" | 50 | 1/2" | 7/8" | 100 | 3/4" F NPT | 3,000 | HP1125-5-50-EA | 4,500 | 38 | 6 |
| 1125-5-50-EB | 3/4" | 1 1/4" | 50 | 1/2" | 7/8" | 100 | 3/4" F NPT | 3,000 | HP1125-5-50-EB | 4,500 | 38 | 6 |
| 1125-5-50-ED | 3/4" | 1 1/4" | 50 | 1/2" | 7/8" | 100 | 3/4" F NPT | 3,000 | HP1125-5-50-ED | 4,500 | 38 | 6 |
| 1125-5-50-EF | 3/4" | 1 1/4" | 50 | 1/2" | 7/8" | 100 | 3/4" F NPT | 3,000 | HP1125-5-50-EF | 4,500 | 38 | 6 |
| 1125-5-50-H | 3/4" | 1 1/4" | 50 | 1/2" | 7/8" | 100 | 3/4" F NPT | 3,000 | HP1125-5-50-H | 4,500 | 38 | 6 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
