Built for compressed air, grease/hydraulic, lubrication, washdown, and other medium-pressure hose handling applications, the Coxreels 1125-5-50-A motor rewind hose reel gives maintenance crews a powered rewind option for managing up to 50 ft of 3/4" I.D. hose at up to 3000 PSI. The 1125 Series uses Coxreels one-piece welded steel "A" frame, low-profile outlet riser, and open drum slot design to help the hose wrap smoothly without sharp bends that can shorten hose life. Its compressed air #4 Gast motor rewind provides powered retraction where manual hand-crank operation is not preferred, helping reduce operator effort when handling larger, higher-pressure hose assemblies.
The 1125-5-50-A is supplied less hose, allowing buyers to install a compatible hose matched to their media, pressure, temperature, and fitting requirements. With a 3/4" hose I.D., 1-1/4" hose O.D. capacity, and compact 17.38" W x 18.75" H x 17.63" L reel envelope, this model fits service trucks, shop walls, equipment bays, and plant maintenance areas where controlled hose storage and powered rewind are required.
*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.
Type: Motor Rewind Hose Reel | Series: 1125 Series | Model: 1125-5-50-A | Rewind Type: Compressed Air #4 Gast Motor | Configuration: Less Hose | Hose I.D.: 3/4" | Hose O.D.: 1-1/4" | Hose Capacity: 50 ft | Max Pressure: 3000 PSI | Hose Included: No | Ship Weight: 46 lbs | Overall Dimensions: 17.38" W x 18.75" H x 17.63" L | Mounting Pattern: 9.44" M x 10" N | Base: 11.38" X x 16" Y
Features:
- Compressed air motor rewind helps retract larger hose assemblies with less manual effort than hand-crank-only reel setups.
- All welded steel "A" frame construction supports the reel during stationary mounting and mobile service use.
- Low-profile outlet riser and open drum slot design promote a flatter, smoother hose wrap and help reduce hose crimping during rewind.
- Machined solid brass 90° full-flow NPT swivel supports efficient fluid transfer and allows seal service without removing the reel from its mount.
- Permanently lubricated, self-aligning pillow block bearings support smooth drum rotation with reduced bearing maintenance.
- Adjustable tension brake helps control drum free-wheeling during hose payout and rewind.
- Long-handled locking pin secures the reel from rotation during transport or storage.
- CPC powder coat finish helps resist chipping and corrosion in shop, plant, and service vehicle environments.
Made in USA: 
Applications:
- Industrial maintenance and MRO areas where 3/4" hose must be stored neatly for air, lubrication, washdown, or compatible fluid transfer service.
- Fleet service trucks and mobile maintenance units that need powered hose rewind without relying on an electric motor connection.
- Manufacturing plants and equipment bays where controlled hose payout helps reduce floor clutter and trip hazards around workstations.
- Hydraulic, grease, or oil service areas when the selected hose, fittings, seals, and media are compatible with the application requirements.
- Washdown and pressure-related service points requiring a medium-pressure reel rated up to 3000 PSI.
FAQs:
- Q: What does "less hose" mean on the Coxreels 1125-5-50-A?
A: It means the reel is supplied without hose installed. The buyer must provide compatible 3/4" I.D. hose separately and confirm that the hose pressure rating, media compatibility, temperature range, and fittings match the application. - Q: What is the benefit of the compressed air #4 Gast motor rewind?
A: The air motor provides powered rewind using compressed air, reducing the manual effort required to retract larger hose assemblies. This is helpful on service trucks, plant maintenance stations, and work areas where electric rewind is not the preferred setup. - Q: Can this reel be used for shop air service?
A: Yes, when the hose, fittings, and air supply components are properly selected for the system pressure and flow requirements. The reel is rated for up to 3000 PSI, but the complete hose assembly must also be rated for the intended shop air service. - Q: What size hose does this reel hold?
A: This model is sized for 50 ft of 3/4" I.D. hose with a listed 1-1/4" hose O.D. capacity. Using hose with a larger outside diameter may reduce capacity or interfere with proper wrapping on the drum. - Q: What mounting information should be checked before ordering?
A: Confirm that the available mounting surface can accommodate the reel's 17.38" W x 18.75" H x 17.63" L overall dimensions, 9.44" M x 10" N mounting pattern, and 11.38" X x 16" Y base footprint.
| LESS HOSE | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SKU | STANDARD CAP | OPTIONAL CAP. Reducer required |
INLET SWIVEL & OUTLET RISER |
PSI | SKU | HP PSI | APRX. LBS. |
SIZE INDEX |
||||
| I.D. | O.D. | FT. | I.D. | O.D. | FT. | |||||||
| 1125-5-50 | 3/4" | 1 1/4" | 50 | 1/2" | 7/8" | 100 | 3/4" F NPT | 3,000 | HP1125-5-50 | 4,500 | 38 | 6 |
| 1125-5-50-A | 3/4" | 1 1/4" | 50 | 1/2" | 7/8" | 100 | 3/4" F NPT | 3,000 | HP1125-5-50-A | 4,500 | 38 | 6 |
| 1125-5-50-AB | 3/4" | 1 1/4" | 50 | 1/2" | 7/8" | 100 | 3/4" F NPT | 3,000 | HP1125-5-50-AB | 4,500 | 38 | 6 |
| 1125-5-50-C | 3/4" | 1 1/4" | 50 | 1/2" | 7/8" | 100 | 3/4" F NPT | 3,000 | HP1125-5-50-C | 4,500 | 38 | 6 |
| 1125-5-50-E | 3/4" | 1 1/4" | 50 | 1/2" | 7/8" | 100 | 3/4" F NPT | 3,000 | HP1125-5-50-E | 4,500 | 38 | 6 |
| 1125-5-50-EA | 3/4" | 1 1/4" | 50 | 1/2" | 7/8" | 100 | 3/4" F NPT | 3,000 | HP1125-5-50-EA | 4,500 | 38 | 6 |
| 1125-5-50-EB | 3/4" | 1 1/4" | 50 | 1/2" | 7/8" | 100 | 3/4" F NPT | 3,000 | HP1125-5-50-EB | 4,500 | 38 | 6 |
| 1125-5-50-ED | 3/4" | 1 1/4" | 50 | 1/2" | 7/8" | 100 | 3/4" F NPT | 3,000 | HP1125-5-50-ED | 4,500 | 38 | 6 |
| 1125-5-50-EF | 3/4" | 1 1/4" | 50 | 1/2" | 7/8" | 100 | 3/4" F NPT | 3,000 | HP1125-5-50-EF | 4,500 | 38 | 6 |
| 1125-5-50-H | 3/4" | 1 1/4" | 50 | 1/2" | 7/8" | 100 | 3/4" F NPT | 3,000 | HP1125-5-50-H | 4,500 | 38 | 6 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
