Coxreels 1125PCL-8410 Hand Crank Cord Reel | 1125PC Series | 225' (12/4) / 175' (10/4) Capacity | 30 Amps | 600 Volts | Less Cord

Built for long-run power cord storage on shop floors, service trucks, manufacturing areas, and utility workstations, the Coxreels 1125PCL-8410 1125PC Series hand crank cord reel provides organized cord handling for applications using 12/4 cord up to 225 ft or 10/4 cord up to 175 ft. The 30 Amp, 600 Volt, 4-pole slip ring configuration supports multi-conductor power cord routing while keeping the cord stored on a rigid welded steel frame instead of loose on the floor. Its hand crank rewind gives the operator direct control when retrieving cord, which is useful in areas where controlled manual rewind is preferred over spring or motorized retraction.

The 1125PCL-8410 is part of Coxreels' 1125PC Series of power cord reels and is supplied less cord, allowing the installer to select compatible cord based on gauge, length, insulation type, electrical service, and local code requirements. A drum-located slip ring assembly (the electrical transfer assembly that allows the reel to rotate while maintaining connection) is positioned for routine service access, while the narrow frame helps fit the reel into restricted mounting spaces.

Type: Hand Crank Cord Reel | Series: 1125PC Series | Model: 1125PCL-8410 | Configuration: Less Cord | Reel Storage Capacity: 225 ft of 12/4 cord or 175 ft of 10/4 cord | Cord Grip Range: 0.63" - 0.75" | Voltage Rating: 600 Volts | Slip Ring Amps: 30 Amps | Slip Ring Poles: 4 | Approx. Weight: 35 lbs | Size Index: 1

Features:

• Drum-located slip ring assembly includes an easy-access cover, allowing routine maintenance without unnecessary reel disassembly.
• 4-pole, 30 Amp slip ring configuration is rated at 600 Volts for compatible multi-conductor cord applications.
• All welded steel 'A' frame construction strengthens the reel structure for fixed mounting in industrial and vehicle-based work environments.
• Narrow frame width helps simplify installation in restricted spaces where floor, wall, bench, or vehicle mounting space is limited.
• Permanently lubricated, self-aligning pillow block bearings support smooth drum rotation during cord payout and rewind.
• 3/4" trade size single gang outlet box provides external access to lead connections.
• 'Cable Keeper' helps prevent the lead cable from whipping or twisting during operation.
• Adjustable tension brake helps prevent free-wheeling, while the long-handled locking pin secures the reel from rotation during transport or storage.

Made in USA:

2 Year Warranty

Applications:

• Manufacturing plants and facilities using long power cord runs for tools, lighting, or equipment staging.
• Service, mechanic, and utility vehicles that need organized cord storage for field repair and mobile maintenance work.
• General industrial work areas where loose cord management creates clutter, trip hazards, or time-consuming cleanup.
• Construction, railroad, and maintenance operations that require controlled cord payout and manual rewind in changing jobsite conditions.
• Workshops and fleet garages using longer 4-conductor cord lengths for power distribution, repair bays, and temporary workstations.

FAQs:

• Q: Does the Coxreels 1125PCL-8410 include cord?
  A: No. This model is supplied less cord. The buyer or installer must provide compatible cord separately based on the reel capacity, electrical requirements, and applicable codes.
• Q: What cord sizes fit this reel?
  A: The 1125PCL-8410 is listed for up to 225 ft of 12/4 cord or up to 175 ft of 10/4 cord, with a cord grip range of 0.63" - 0.75". Actual use must not exceed the lowest-rated component in the cord and reel assembly.
• Q: What does a 4-pole slip ring mean?
  A: A 4-pole slip ring provides four electrical paths through the rotating drum assembly. This allows the reel to rotate while maintaining electrical continuity for compatible 4-conductor cord setups.
• Q: Should the cord be fully unspooled before use?
  A: Coxreels cautions that cord should be completely unspooled from the reel when energized unless proper NEC ampacity derating factors are applied. Cord gauge, length, insulation rating, and electrical service must be considered before use.
• Q: Can this reel be mounted on a service vehicle?
  A: Yes, this series is used in service, mechanic, and utility vehicle applications when properly mounted. The locking pin helps secure the reel from rotation during transport or storage.

Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.

For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com