Coxreels 1125PCL-8410-C Bevel Gear Crank Cord Reel | 1125PC Series | 225' (12/4) / 175' (10/4) Capacity | 30 Amps | 600 Volts | Less Cord

When long 4-conductor power cord must be stored, deployed, and rewound from a fixed reel station, the Coxreels 1125PCL-8410-C bevel gear crank cord reel provides a manual rewind solution for shop, plant, service vehicle, and utility applications. This 1125PC Series reel is supplied less cord and is rated for 225 ft of 12/4 SOOW cord or 175 ft of 10/4 SOOW cord, giving buyers flexibility to install the cord gauge and length that matches the electrical load. A drum-located slip ring assembly supports 600 volts and 30 amps through a 4-pole configuration, while the front hand crank bevel geared crank allows controlled manual rewind without relying on a powered motor.

The 1125PCL-8410-C uses Coxreels all-welded steel 'A' frame, permanently lubricated self-aligning pillow block bearings, adjustable tension brake, and long-handled locking pin to help keep the reel stable during installation, storage, transport, and daily use. The reel's narrow frame helps fit restricted mounting areas, while the external connection access box simplifies field wiring connections when paired with the correct inlet fitting, strain relief, or conduit connection.

Type: Bevel Gear Crank Cord Reel | Series: 1125PC Series | Model: 1125PCL-8410-C | Configuration: Less Cord | Rewind Type: Front Hand Crank, Bevel Geared Crank | Cord Capacity: 225 ft of 12/4 SOOW or 175 ft of 10/4 SOOW | Cord Grip Range: .63" - .75" | Voltage Rating: 600V | Slip Ring Amps: 30 Amps | Slip Ring Poles: 4 | Size Index: 1

Features:

• Drum-located slip ring assembly with an easy-access cover supports routine inspection and maintenance without unnecessary disassembly.
• 4-pole, 30 amp slip ring configuration is rated at 600 volts for compatible 4-conductor power cord applications.
• Front hand crank bevel geared crank provides controlled manual rewind for installations where powered rewind is not required.
• All welded steel 'A' frame construction strengthens the reel structure for fixed mounting in shops, plants, vehicles, and utility environments.
• Narrow frame width helps the reel fit into restricted spaces where installation clearance is limited.
• Permanently lubricated self-aligning pillow block bearings support smooth drum rotation during cord payout and rewind.
• Integrated 'Cable Keeper' helps prevent the lead cable from whipping or twisting during reel movement.
• Adjustable tension brake helps prevent free-wheeling, while the long-handled locking pin secures the reel from rotation during transport or storage.

Made in USA:

2 Year Warranty

Applications:

• Power tool stations in shops and production areas where longer 4-conductor cord runs need orderly storage and controlled rewind.
• Manufacturing plants and facilities using fixed cord reel installations for maintenance, repair, and equipment service access.
• Service, mechanic, and utility vehicles that require a compact less-cord reel so the installer can choose the correct cord for the vehicle's electrical setup.
• General industrial work areas where cord management helps reduce floor clutter and keeps electrical service cord organized between uses.
• Mining, construction, and railroad support operations where manual crank cord storage is preferred over motorized rewind.

FAQs:

• Q: What does 'less cord' mean on the 1125PCL-8410-C?
  A: It means the reel is supplied without cord installed. The buyer or installer must provide compatible cord separately based on gauge, conductor count, insulation rating, length, and applicable electrical code requirements.
• Q: What cord sizes fit this Coxreels cord reel?
  A: This model is listed for up to 225 ft of 12/4 SOOW cord or 175 ft of 10/4 SOOW cord. Cord outside diameter must fall within the reel's .63" - .75" cord grip range.
• Q: Is this a motorized cord reel?
  A: No. The '-C' suffix identifies the front hand crank bevel geared crank option. It rewinds manually using the crank rather than an electric, air, or hydraulic motor.
• Q: What does the 4-pole slip ring mean?
  A: A 4-pole slip ring provides four electrical contact paths through the rotating reel drum. This is used for compatible 4-conductor cord applications, but the end user must confirm electrical service, cord rating, and code compliance before installation.
• Q: Should the cord be unspooled before use?
  A: Coxreels cautions that cord should be completely unspooled from the reel when energized unless proper NEC ampacity derating factors are applied. This helps prevent overheating when current-carrying conductors are layered on the reel.

Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.

For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com