Coxreels 1125PCL-8408M Hand Crank Cord Reel | 1125PC Series | 125' (8/4) Capacity | 40 Amps | 600 Volts | Less Cord

Built for long power cord storage in shops, service vehicles, manufacturing plants, and field maintenance areas, the Coxreels 1125PCL-8408M hand crank cord reel provides controlled storage for up to 125 ft of 8/4 cord. This 1125PC Series reel is supplied less cord, allowing buyers to install the correct compatible SEOOW cord for their electrical service, worksite requirements, and local code requirements.

The reel uses a drum-located slip ring assembly, which transfers electrical current through the rotating drum while allowing cord to pay out and rewind. Its 40 Amp, 600 Volt, 4-pole configuration supports 4-conductor power cord applications, while the solid steel hand crank gives operators simple manual control without a motor, air supply, or hydraulic power source. The all-welded steel “A” frame, narrow-width footprint, adjustable tension brake, and long-handled locking pin make it practical for fixed installations and mobile equipment where cord storage needs to stay secure between uses.

*Note: The above product image is for illustration purposes only. This product is a reel and does not include any cord. Please note this before ordering.

Type: Hand Crank Cord Reel | Series: 1125PC Series / 1125PCL Series | Model: 1125PCL-8408M | Configuration: Less Cord | Cord Capacity: 125 ft of 8/4 SEOOW cord | Cord O.D.: .78" | Cord Grip Range: .75"–.85" | Slip Ring Rating: 40 Amps | Voltage Rating: 600 Volts | Slip Ring Poles: 4 | Approx. Weight: 35 lbs | Reel Size Index: 1

Features:

• Drum-located slip ring assembly with easy-access cover simplifies routine inspection and service.
• 4-pole, 40 Amp slip ring configuration supports 4-conductor cord applications rated up to 600 volts.
• All-welded steel “A” frame construction strengthens the reel structure for shop, plant, and vehicle-mounted installations.
• Narrow-width design helps fit the reel into restricted installation spaces where floor or wall clearance is limited.
• Permanently lubricated, self-aligning pillow block bearings support smooth drum rotation during cord payout and rewind.
• External 3/4" trade size single gang outlet box provides access to lead connections.
• “Cable Keeper” helps prevent the lead cable from whipping or twisting during use.
• Adjustable tension brake and long-handled locking pin help prevent free-wheeling and secure the reel during transport or storage.
• Solid steel direct hand crank with smooth round handle provides simple manual rewind control.

Made in USA:

2 Year Warranty

Applications:

• Manufacturing plants and facilities managing long 4-conductor power cords for equipment or temporary work areas.
• Service, mechanic, and utility vehicles where cord storage must stay organized during transport.
• General industrial maintenance areas supplying power to tools, lighting, or workstations from a controlled cord storage point.
• Construction, railroad, and mining support operations that need a manual rewind reel for high-capacity cord storage.
• Shop and facility environments where hand crank rewind is preferred over motorized rewind for simple operation and reduced power requirements.

FAQs:

• Q: Does the Coxreels 1125PCL-8408M include cord?
  A: No. This reel is supplied less cord. The buyer must provide compatible 8/4 SEOOW cord separately and confirm that the cord, fittings, insulation rating, amperage, and installation method meet the application requirements.
• Q: What does the 8/4 cord capacity mean?
  A: 8/4 refers to 8 AWG, 4-conductor cord. This model is sized to hold up to 125 ft of 8/4 cord with an approximate .78" outside diameter.
• Q: What does the 4-pole slip ring do?
  A: The slip ring allows electrical current to pass through the reel while the drum rotates. A 4-pole slip ring supports four electrical conductors, which is commonly required for certain multi-conductor power cord setups.
• Q: Can this reel be used at the full 40 Amp rating?
  A: The catalog lists this model with a 40 Amp slip ring rating and notes that the reel must be de-rated by 20% if more than 3 poles are energized. Cord AWG, cord length, insulation rating, electrical service, and all applicable electrical codes must also be considered before use.
• Q: Should the cord be fully unspooled before energizing?
  A: Coxreels cautions that cord should be completely unspooled from the reel when energized unless proper NEC ampacity derating factors are applied. This helps reduce heat buildup and keeps the application within the lowest rated component in the system.

Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.

For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com