Coxreels 1125-5-200-H-SP Stainless Steel Hydraulic Rewind Hose Reel | SS1125 Series | 3/4" Hose Diameter | 200' Hose Length | 3000 Max PSI | Less Hose

For corrosion-prone hose handling where hydraulic power is already available, the Coxreels 1125-5-200-H-SP combines stainless steel reel construction with hydraulic rewind convenience. This SS1125 Series reel is built for 3/4" I.D. hose up to 200 ft, giving maintenance crews, processing facilities, marine service teams, and plant operators the reach needed for longer hose runs while keeping excess hose stored safely on the drum. The 3000 PSI pressure rating supports compatible high-pressure hose applications when the reel, hose, fittings, and system media are properly matched.

The hydraulic rewind configuration helps reduce manual effort when retrieving long, fluid-filled, or heavier hose assemblies. The stainless steel fluid path supports cleaner transfer through the reel, while the 'SP' finish identifies Coxreels' standard unpolished 'as manufactured' stainless steel finish. The 1125 Series open drum slot and low-profile outlet riser help promote a flatter, smoother hose wrap during rewind, reducing hose kinking concerns during storage and payout.

*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.

Type: Stainless Steel Hydraulic Rewind Hose Reel | Series: SS1125 Series | Model: 1125-5-200-H-SP | Configuration: Less Hose | Rewind: Hydraulic Rewind | Hose I.D. Capacity: 3/4" | Hose O.D. Capacity: 1-1/4" | Hose Capacity: 200 ft | Optional Capacity: 1/2" I.D. x 7/8" O.D. x 450 ft with reducer required | Inlet Swivel & Outlet Riser: 3/4" F NPT | Max Pressure: 3000 PSI | Approx. Weight: 61 lb

Features:

• Stainless steel construction with stainless steel fluid paths supports cleaner hose handling in corrosive, hygienic, washdown, and contamination-sensitive environments.
• Hydraulic rewind operation reduces manual cranking effort on long hose lengths when a compatible hydraulic power source is available.
• Non-corrosive 90° full-flow NPT swivel inlet is machined from high quality stainless steel for smooth flow through the reel connection.
• Nitrile swivel seals use non-toxic food grade grease for SS Series applications where cleaner fluid handling is required.
• All-welded A-frame construction provides a rigid mounting structure for plant, dock, service truck, and facility hose management.
• Low-profile outlet riser and open drum slot design help guide hose onto the drum for a flat, smooth wrap with reduced crimping.
• Permanently lubricated, self-aligning pillow block bearings support smooth reel rotation with reduced routine service requirements.
• Adjustable tension brake helps prevent free-wheeling during operation, while the long-handled locking pin secures the reel during transport or storage.

Made in USA:

2 Year Warranty

Applications:

• Marine, dock, and offshore service areas managing compatible hose where stainless construction helps reduce corrosion concerns.
• Food, beverage, dairy, and commercial processing plants storing long hose runs in washdown or cleaner handling environments.
• Industrial maintenance and MRO departments retrieving high-pressure hose for equipment service, fluid transfer, or facility support tasks.
• Service trucks and mobile maintenance units using hydraulic power to rewind longer hose lengths without manual crank operation.
• Water treatment, chemical handling, and processing facilities where reel material, hose selection, and media compatibility must be reviewed together.

FAQs:

• Q: What does 'less hose' mean on the 1125-5-200-H-SP?
  A: It means the reel is supplied without hose installed. The buyer must provide a compatible hose separately based on hose I.D., hose O.D., pressure rating, media compatibility, and end fitting requirements.
• Q: How is a hydraulic rewind reel different from a hand crank reel?
  A: A hydraulic rewind reel uses hydraulic power to retract the hose instead of relying on manual cranking. This is useful on longer hose lengths, heavier hose assemblies, or mobile equipment where hydraulic power is already available.
• Q: Is this the polished stainless version?
  A: No. The 'SP' suffix indicates Coxreels' standard unpolished 'as manufactured' stainless steel finish. If a polished stainless finish is required for a specific washdown or appearance standard, verify the correct Coxreels finish option before ordering.
• Q: Can this reel be used with 1/2" hose instead of 3/4" hose?
  A: Coxreels lists an optional capacity of 1/2" I.D. x 7/8" O.D. hose up to 450 ft for this size index, with a reducer required. Confirm hose O.D., pressure rating, reducer size, and system media compatibility before final selection.
• Q: Does the 3000 PSI rating apply to every hose used with this reel?
  A: No. The reel is rated up to 3000 PSI, but the complete assembly is limited by the lowest-rated component, including the hose, swivel, fittings, and adapters. Always match the hose assembly to the actual operating pressure and fluid being used.

Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.

For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com