When a fixed 230V power source is available and hose retrieval needs to be controlled without hand cranking, the Coxreels 1125-4-200-EJ-SP SS1125 Series stainless steel motor rewind hose reel provides powered hose storage for 1/2" I.D. hose with a 200 ft standard hose capacity. Rated for 3000 PSI, this reel is suited for compatible medium-pressure fluid handling in corrosive, hygienic, washdown, marine, and processing environments. The EJ motor option is a 230V AC, 1/2 HP explosion proof reversible AC rectified motor, giving facilities a powered rewind configuration where the electrical installation and area classification support that motor selection.
The SS1125 Series uses stainless steel construction with stainless steel fluid paths for clean, non-corrosive performance in areas where rust, contamination, and washdown exposure are everyday concerns. The SP finish is Coxreels' standard unpolished 'as manufactured' stainless steel finish, making this model a practical choice for food and chemical processing, dairies, bottling plants, marine docks, pulp and paper facilities, water treatment areas, and other environments that require corrosion-resistant hose management.
*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.
Type: Stainless Steel Electric Motor Rewind Hose Reel | Series: SS1125 Series | Model: 1125-4-200-EJ-SP | Configuration: Less Hose | Motor Option: EJ, 230V AC, 1/2 HP Explosion Proof, Reversible AC Rectified | Hose I.D.: 1/2" | Hose O.D.: 7/8" | Standard Hose Capacity: 200 ft | Optional Hose Capacity: 3/8" I.D. x 3/4" O.D. x 300 ft, reducer required | Inlet Swivel & Outlet Riser: 1/2" F NPT | Max Pressure: 3000 PSI | Approx. Ship Weight: 65 lbs | Overall Dimensions: 25.75" W x 19.25" H x 17.63" L | Mounting Pattern: 15.44" M x 10" N | Base: 17.38" X x 16" Y | Drum Width: 12"
Features:
- 230V AC, 1/2 HP explosion proof reversible AC rectified motor provides powered rewind for installations where the electrical supply and site requirements call for the EJ motor option.
- Stainless steel construction and stainless steel fluid paths support clean, non-corrosive performance in washdown, marine, food processing, and chemical processing environments.
- Non-corrosive machined 90° full-flow NPT swivel inlet helps maintain fluid flow while reducing corrosion concerns at the reel connection point.
- Nitrile swivel seals with non-toxic food grade grease support use in clean-service environments when the selected hose and media are also compatible.
- All-welded A-frame base provides a stable mounting structure for fixed workstations, plant service areas, dockside use, and processing facilities.
- Low profile outlet riser and open drum slot design help create a flat, smooth hose wrap and reduce hose crimping during rewind.
- Permanently lubricated, self-aligning pillow block bearings help keep the reel drum rotating smoothly with less bearing maintenance.
- Adjustable tension brake helps control drum movement and reduce free-wheeling during hose payout or rewind.
Made in USA: 
Applications:
- Food and chemical processing: Managing compatible hose in areas where stainless steel construction and clean fluid paths help reduce corrosion and contamination concerns.
- Dairies, bottling plants, and commercial kitchens: Powered hose storage for washdown or process-support areas where hoses need to be kept off floors and returned neatly after use.
- Marine, docks, and offshore facilities: Hose management in moisture-prone environments where stainless steel construction helps resist corrosion from water and salt exposure.
- Water treatment and supply operations: Organized hose storage for service points, rinse-down stations, and compatible medium-pressure fluid handling tasks.
- Petrochemical and manufacturing plants: Motor rewind hose handling where the 230V explosion proof motor option, pressure rating, and hose selection match facility requirements.
FAQs:
- Q: What does 'less hose' mean for this Coxreels 1125-4-200-EJ-SP reel?
A: It means the reel is supplied without hose installed. A compatible hose must be purchased separately, and the hose must match the reel capacity, media, pressure, temperature, and fitting requirements. - Q: What is the difference between the EJ motor option and the standard electric option?
A: The EJ suffix identifies a 230V AC, 1/2 HP explosion proof reversible AC rectified motor option. Standard electric motor models are not the same configuration, so confirm the voltage and area classification required before ordering. - Q: Can this reel hold hose other than 1/2" I.D.?
A: The standard listed capacity is 1/2" I.D. x 7/8" O.D. hose up to 200 ft. Coxreels also lists an optional 3/8" I.D. x 3/4" O.D. capacity up to 300 ft when the proper reducer is used. - Q: Is the SP finish polished stainless steel?
A: No. SP is Coxreels standard unpolished 'as-manufactured' stainless steel finish. For an electro-polished stainless steel finish, Coxreels uses the SS finish designation instead. - Q: Does the explosion proof motor automatically make the reel suitable for any hazardous location?
A: No. The motor option must be matched to the facility's electrical classification, codes, installation method, and safety requirements. Always confirm compatibility with the site safety or electrical authority before installation.
| LESS HOSE | SIZE INDEX | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| SKU | STANDARD CAP | OPTIONAL CAP. Reducer required |
INLET SWIVEL & OUTLET RISER |
PSI | APRX. LBS. |
|||||
| I.D. | O.D. | FT. | I.D. | O.D. | FT. | |||||
|
SS1125 SERIES- Hand Crank & Motor Driven
|
||||||||||
| 1125-4-200-SP | 1/2" | 7/8" | 200 | 3/8" | 3/4" | 300 | 1/2" F NPT | 3,000 | 39 | 5 |
| 1125-4-200-A-SP | 1/2" | 7/8" | 200 | 3/8" | 3/4" | 300 | 1/2" F NPT | 3,000 | 39 | 5 |
| 1125-4-200-E-SP | 1/2" | 7/8" | 200 | 3/8" | 3/4" | 300 | 1/2" F NPT | 3,000 | 39 | 5 |
| 1125-4-200-EA-SP | 1/2" | 7/8" | 200 | 3/8" | 3/4" | 300 | 1/2" F NPT | 3,000 | 39 | 5 |
| 1125-4-200-EB-SP | 1/2" | 7/8" | 200 | 3/8" | 3/4" | 300 | 1/2" F NPT | 3,000 | 39 | 5 |
| 1125-4-200-ED-SP | 1/2" | 7/8" | 200 | 3/8" | 3/4" | 300 | 1/2" F NPT | 3,000 | 39 | 5 |
| 1125-4-200-EJ-SP | 1/2" | 7/8" | 200 | 3/8" | 3/4" | 300 | 1/2" F NPT | 3,000 | 39 | 5 |
| 1125-4-200-H-SP | 1/2" | 7/8" | 200 | 3/8" | 3/4" | 300 | 1/2" F NPT | 3,000 | 39 | 5 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
