Built for hazardous-location hose handling where stainless construction and powered rewind are both required, the Coxreels 1125-4-100-EA-SP is a stainless steel electric motor rewind hose reel from the SS1125 Series. This less-hose configuration is sized for 1/2" I.D. hose with up to 100 ft hose capacity, giving the buyer flexibility to install hose selected for the exact media, fitting style, bend radius, and pressure requirement. Its 3000 PSI pressure rating supports compatible high-pressure hose service, while the 115V explosion proof 1/2 HP electric motor rewind provides powered hose retrieval in qualifying environments where the motor specification must match the site's electrical and safety requirements.
The SS1125 Series combines Coxreels' open drum 1125-style reel platform with stainless steel construction for wet, corrosive, washdown, marine, and processing environments. The explosion proof motor configuration is selected when a standard electric motor is not appropriate for the installation area; final suitability depends on the site classification, wiring method, controls, and applicable electrical code. A low profile outlet riser and open drum slot help the hose lay flat during rewind, while the stainless steel reel frame and stainless steel swivel/fluid path help reduce corrosion concerns compared with standard painted steel reel models.
*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.
Type: Stainless Steel Explosion Proof Electric Motor Rewind Hose Reel | Series: SS1125 Series | Model: 1125-4-100-EA-SP | Rewind: 115V Explosion Proof 1/2 HP Electric Motor | Configuration: Less Hose | Hose I.D.: 1/2" | Hose O.D.: 7/8" | Hose Capacity: 100 ft | Max Pressure: 3000 PSI | Inlet: 1/2" Female NPT | Swivel Material: Stainless Steel | Seal Type: Nitrile | Bearing Type: Permanently Lubricated Self-Aligning Pillow Block Bearings | Finish: Stainless Steel
Features:
- 115V explosion proof 1/2 HP electric motor rewind supports powered hose retrieval where the reel motor must match hazardous-location installation requirements.
- Stainless steel construction helps resist corrosion in wet, washdown, marine, chemical processing, and other harsh operating environments.
- Stainless steel swivel and fluid path help reduce corrosion concerns when compared with standard painted steel reel configurations.
- Motorized direct gear drive provides chain-free powered rewind for smooth reel rotation.
- Low profile outlet riser and open drum slot help guide hose into a flat, smooth wrap across the drum.
- Permanently lubricated self-aligning pillow block bearings support consistent reel rotation with reduced routine bearing maintenance.
- All-welded A-frame style base provides a stable mounting platform for fixed industrial installations.
- Less-hose configuration lets the buyer install hose selected for the required media, pressure rating, temperature range, fittings, and environmental exposure.
Made in USA: 
Applications:
- Hazardous-location process areas - powered hose rewind where explosion proof electrical equipment is required by the facility classification.
- Chemical processing and transfer zones - stainless reel storage for compatible high-pressure hose used around corrosive or washdown-prone work areas.
- Marine and dockside service - managing hose in salt-air, wet, or splash-prone environments where corrosion resistance matters.
- Food and beverage processing - organizing compatible hose in sanitation, maintenance, and processing support areas where stainless construction is preferred.
- Industrial maintenance and MRO - fixed powered hose management for plants that need controlled rewind, 100 ft hose capacity, and stainless steel reel construction.
FAQs:
- Q: Does the Coxreels 1125-4-100-EA-SP include hose?
A: No. This is a less-hose reel. It is built to hold up to 100 ft of compatible 1/2" I.D. hose, but hose must be selected and installed separately. - Q: What does 'explosion proof' mean for this reel?
A: Explosion proof refers to the motor configuration, not a blanket approval for every hazardous environment. The installation must still be checked against the facility's area classification, wiring requirements, controls, and applicable electrical codes. - Q: Why choose the EA version instead of the standard 12V DC electric version?
A: The EA version uses a 115V explosion proof 1/2 HP electric motor. It is selected when the installation requires 115V AC powered rewind and an explosion proof motor configuration rather than a standard DC motor. - Q: Can this reel be used with any 1/2" hose?
A: The hose must match the reel's 1/2" I.D. and 7/8" O.D. capacity, 100 ft length capacity, pressure rating, fittings, bend radius, and media compatibility. Confirm the hose and swivel materials are suitable for the fluid or gas being handled. - Q: What should be verified before ordering?
A: Confirm the 115V power supply, explosion proof motor requirement, 1/2 HP motor configuration, 100 ft hose capacity, 3000 PSI rating, 1/2" Female NPT inlet, and mounting space before purchasing.
| LESS HOSE SKU | STANDARD CAP | OPTIONAL CAP. Reducer required |
INLET SWIVEL & OUTLET RISER |
PSI | APRX. LBS. |
SIZE INDEX | ||||
|---|---|---|---|---|---|---|---|---|---|---|
| I.D. | O.D. | FT. | I.D. | O.D. | FT. | |||||
|
SS1125 SERIES - Hand Crank & Motor Driven
|
||||||||||
| 1125-4-100-SP | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | 36 | 4 |
| 1125-4-100-A-SP | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | 36 | 4 |
| 1125-4-100-E-SP | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | 36 | 4 |
| 1125-4-100-EA-SP | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | 36 | 4 |
| 1125-4-100-EB-SP | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | 36 | 4 |
| 1125-4-100-ED-SP | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | 36 | 4 |
| 1125-4-100-EJ-SP | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | 36 | 4 |
| 1125-4-100-H-SP | 1/2" | 7/8" | 100 | 3/8" | 3/4" | 140 | 1/2" F NPT | 3,000 | 36 | 4 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
