When production assembly work calls for controlled cordless fastening without air hoses or power cords, the Cleco CTBPW10Q CellTek cordless electric nutrunner gives operators a compact pistol tool for repeatable rundown on light-to-medium torque joints. Its 1.8 - 7.4 ft-lbs torque range supports smaller threaded fasteners where consistency matters, while the 1600 r/min speed helps reduce rundown time before final torque control. The 1/4" quick change output accepts compatible hex tooling for fast bit changes at the station, and the CellTek platform adds smart-factory connectivity for communicating fastening data with Cleco controller systems.
Built for line-side assembly, repair stations, and controlled fastening cells, the CTBPW10Q balances speed, torque range, and wireless production features in a pistol configuration. CellTek cordless tools are intended for safety-critical assembly environments where traceability, operator feedback, and repeatable fastening results are important. The listed 2.1 lb tool weight does not include the battery, so buyers should account for battery selection when planning station ergonomics and total tool weight.
Please note that this listing is for the tool only; the Cordless Battery and Charger are not included and must be purchased separately.
Type: Cordless Electric Nutrunner | Series: Cleco CellTek | Model: CTBPW10Q | Tool Style: Pistol | Speed: 1600 r/min | Torque Range: 2.4 - 10 Nm / 1.8 - 7.4 ft-lbs | Output: 1/4" Quick Change | Weight: 0.95 kg / 2.1 lb, battery not included | Length: 207 mm / 8.15" | Side to Center: 19.3 mm / 0.76" | Height: 210 mm / 8.27"
Features:
- CellTek cordless electric platform supports controlled assembly without air lines or trailing power cords.
- 1600 r/min speed helps improve rundown time on repetitive fastening tasks before final torque is reached.
- 1/4" quick change output allows fast bit changes with compatible hex tooling.
- Connectivity supports real-time synchronization with manufacturing and engineering systems.
- Multi-color LED work light provides secondary “OK / Not OK” operator feedback while illuminating the workpiece.
- Stay Alive Function prevents reboot during battery changes, helping maintain production flow.
- Enhanced WiFi range supports connectivity up to 300 feet within a production facility.
- SmartSwap card capability allows wireless parameters and rundown results to be transferred quickly when exchanging tools on the line.
Made in USA: 
Note: Cordless Battery and Charger Sold Separately. Batteries and Chargers can be purchased from the following links:
Batteries:
Chargers:
Applications:
- Automotive and EV assembly: fastening brackets, interior components, covers, and smaller threaded joints where controlled torque and cordless movement are required.
- Aerospace and transportation production: repetitive fastening in assembly cells where traceability, operator feedback, and controlled rundown are part of the process.
- Electronics and appliance manufacturing: installing machine screws and small fasteners with a 1/4" quick change output for frequent bit changes.
- Industrial assembly lines: reducing cable and hose clutter at workstations while keeping fastening data connected to plant controller systems.
- Repair and rework stations: supporting repeatable fastening on assemblies that require documented torque control instead of manual tightening by feel.
FAQs:
- Q: What type of fastening work is the CTBPW10Q used for?
A: The CTBPW10Q is used for controlled cordless fastening in the 1.8 - 7.4 ft-lbs range. That makes it suited to light-to-medium assembly joints where repeatability and fastening data matter more than high breakaway torque. - Q: What does 1/4" quick change mean?
A: A 1/4" quick change output is a hex drive style that allows compatible bits and bit holders to be changed quickly without a separate chuck key. It is commonly used on production fastening tools where operators switch tooling during assembly. - Q: Does the listed 2.1 lb weight include the battery?
A: No. The manufacturer notes that CellTek tool weight values do not include the battery, so the installed battery will add to the total working weight. - Q: Can this tool connect to Cleco controller systems?
A: Yes. CellTek tools are listed for use with Cleco Global cordless controller platforms, including compatible mPro controller systems. Controller selection should be verified against the plant’s fastening system requirements before purchase. - Q: Is this the right tool for general garage or DIY fastening?
A: Usually not. The CTBPW10Q is a precision assembly nutrunner built for production fastening, connectivity, and repeatability; general garage users are typically better served by a standard cordless drill, impact driver, or torque wrench unless they specifically need a Cleco controlled-fastening system.
Looking for more information about Cleco Electric Nutrunner? Click here to view the Catalog.
Need help selecting the correct Cleco Electric Nutrunners for your application? Please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
