Cleco CTBPW05Q CellTek Cordless Electric Nutrunner | 3525 RPM | 0.8 - 3.6 (ft-lbs) Torque Range | 1/4" Quick Change

Built for light-torque production fastening where speed, traceability, and cordless movement are priorities, the Cleco CTBPW05Q CellTek cordless electric nutrunner delivers a 0.8 - 3.6 ft-lbs torque range for small fasteners used in electronics, appliance, automotive interior, and precision assembly work. Its 3525 RPM rundown speed helps reduce cycle time on repeated fastening tasks, while the 1/4" quick change output supports fast bit changes when operators move between compatible driving accessories.

The pistol-grip configuration gives operators a familiar cordless tool layout for bench, fixture, and line-side assembly stations. CellTek tools are built for connected production environments, with wireless communication, on-tool data backup, LED operator feedback, and controller compatibility that support repeatable fastening processes. At 2.0 lb without battery and 7.52" long, the CTBPW05Q is a compact option for high-speed, low-torque work where a larger right-angle or square-drive nutrunner would be unnecessary.

Please note that this listing is for the tool only; the Cordless Battery and Charger are not included and must be purchased separately.

Type: Cordless Electric Pistol Nutrunner | Series: CellTek | Model: CTBPW05Q | Torque Range: 1.1 - 4.9 Nm / 0.8 - 3.6 ft-lbs | Speed: 3525 r/min | Output: 1/4" Quick Change | Weight Without Battery: 0.90 kg / 2.0 lb | Length: 191 mm / 7.52 in | Side to Center: 19.3 mm / 0.76 in | Height: 210 mm / 8.27 in

Features:

• CellTek cordless platform supports production fastening without air hoses or power cords at the station.
• High 3525 r/min speed supports fast rundown on small fasteners and repetitive light-torque assemblies.
• 1/4" quick change output allows faster bit changes for compatible fastening accessories.
• On-tool storage backs up tool data collection if wireless communication is interrupted.
• Connect up to 16 tools to one controller, reducing controller requirements on multi-tool lines.
• Wireless connectivity options include WiFi 2.4 GHz, WiFi 5.0 GHz, and Bluetooth 4.0.
• Multi-color LED provides secondary “ok / not ok” feedback and helps illuminate the work area.
• Stay Alive function helps prevent reboot during battery changes, reducing interruptions during shift work.

Made in USA: 

Note: Cordless Battery and Charger Sold Separately. Batteries and Chargers can be purchased from the following links:

Batteries:

• Cleco T50-1000497 Smart Lithium-Ion Battery
• Cleco T50-1000498 Smart Lithium-Ion Battery

Chargers:

• Cleco T50-1000499 Rapid Charger
• Cleco T50-1000500 6-Bay Sequential Charger

Applications:

• Electronics assembly — fastening small screws and light hardware where controlled torque helps reduce stripped threads and over-tightening.
• Automotive interior production — installing trim, brackets, light modules, and cabin components that require fast rundown with repeatable torque control.
• Appliance manufacturing — assembling panels, housings, covers, and subassemblies at bench or line-side workstations.
• Light industrial assembly — tightening small fasteners in fixtures, enclosures, instrument panels, and component-level builds.
• Tool crib standardization — adding a low-torque 1/4" quick change CellTek model to an existing Cleco cordless assembly program.

FAQs:

• Q: What type of work is the CTBPW05Q best suited for?
  A: The CTBPW05Q is suited to light-torque production fastening from 0.8 to 3.6 ft-lbs. It is commonly used for small screws and light hardware where speed, repeatability, and cordless operation are more important than high breakaway torque.
• Q: What does 1/4" quick change mean?
  A: A 1/4" quick change output is made for compatible quick-change driving accessories, allowing operators to swap bits quickly without a separate chuck key. Confirm the required bit style and retainer type before matching accessories.
• Q: Is this tool the same as an impact driver?
  A: No. This is a controlled electric assembly nutrunner, not a general-purpose impact driver. It is selected for programmed fastening, torque control, and production traceability rather than impact-style removal or construction fastening.
• Q: Does the CTBPW05Q include a battery, charger, or controller?
  A: The provided source data does not confirm included accessories. Battery, charger, controller, and software requirements should be verified before publishing or ordering.
• Q: When should I choose the CTBPW05Q instead of a higher-torque CellTek model?
  A: Choose the CTBPW05Q when the required torque falls within 0.8 to 3.6 ft-lbs and high rundown speed is important. For larger screws, bolts, or higher final torque requirements, compare the CTBPW10Q, CTBPW15Q, or right-angle CellTek models.

Looking for more information about Cleco Electric Nutrunner? Click here to view the Catalog.

Need help selecting the correct Cleco Electric Nutrunners for your application? Please call (800) 608-5210 or email info@intlairtool.com