Cleco CTA3038 Torque Analyzer | 22 (ft-lbs) Torque Range

Built for low-torque verification work in assembly and quality control areas, the Cleco CTA3038 is a 3.0–30 Nm torque analyzer used to check compatible torque tools against a controlled measurement reference. Its range equals approximately 2.2–22 ft-lbs, making it useful for fastening processes where torque values are above small electronics work but still below larger mechanical assembly ranges.

A torque analyzer is a bench-style measurement device used to confirm that torque tools are applying the expected output before they return to production. The CTA3038 supports tool crib checks, maintenance verification, and quality audits for torque-controlled fastening. The Cleco catalog also lists the CST6838 68 Nm stationary transducer for use on the CTA3038 or CTA0414, giving teams a compatible path for building out a Cleco torque testing station.

Type: Torque Analyzer | Model: CTA3038 | Torque Range: 3.0–30 Nm | Approx. Torque Range: 2.2–22 ft-lbs

Features:

• Torque analyzer for controlled torque verification in production support and quality environments.
• 3.0–30 Nm measurement range covers common low-to-mid torque fastening checks.
• Approximate 2.2–22 ft-lbs range supports tool checks where small torque changes can affect assembly quality.
• Useful for checking torque tools after service, adjustment, scheduled inspection, or before release to the production line.
• Listed with Cleco torque analyzer accessories, including the CST6838 stationary transducer for compatible measurement setups.
• Supports bench-style torque verification workflows in tool cribs, calibration areas, and assembly support stations.

Made in USA:

Applications:

• Manufacturing quality stations verifying torque tool output for controlled fastening processes.
• Tool crib and calibration support areas checking tools before they return to production use.
• Light mechanical assembly operations where fasteners require repeatable low-to-mid torque control.
• Maintenance and MRO departments confirming torque wrench or fastening tool output after adjustment or repair.
• Production support teams maintaining documented torque checks for quality-critical assemblies.

FAQs:

• Q: What is the torque range of the Cleco CTA3038?
  A: The CTA3038 is listed with a 3.0–30 Nm torque range, which is approximately 2.2–22 ft-lbs.
• Q: What is the difference between the CTA3038 and CTA0414?
  A: The CTA3038 covers a higher analyzer range at 3.0–30 Nm. The CTA0414 is the lower-range model listed at 0.4–4 Nm, so the correct choice depends on the torque values your tools need to verify.
• Q: What is a torque analyzer used for?
  A: A torque analyzer measures applied torque so a tool room or quality team can confirm that torque tools are performing within the required range. It is commonly used before tools return to production, after repair, or during scheduled audits.
• Q: Does the CTA3038 include the CST6838 stationary transducer?
  A: The source catalog lists CST6838 as a separate 68 Nm stationary transducer for use on CTA0414 or CTA3038. Do not assume the transducer is included unless the quote or product listing specifically confirms it.
• Q: Is this analyzer used for 50 ft-lbs torque testing?
  A: The CTA3038 analyzer is listed at approximately 2.2–22 ft-lbs. The separate CST6838 stationary transducer is listed at 68 Nm, approximately 50 ft-lbs, for use on CTA0414 or CTA3038; confirm the complete analyzer and transducer setup before ordering.

Looking for more information about Cleco Cordless Tool Accessory? Click here to view the Catalog.

Need help selecting the correct Cleco Cordless Tool Accessories for your application? Please call (800) 608-5210 or email info@intlairtool.com