Cleco CTA0414 Torque Analyzer | 0.3 (ft-lbs) Torque Range

Built for bench-style torque verification, the Cleco CTA0414 is a 0.4–4 Nm torque analyzer used to check low-torque fastening tools and torque wrenches before they return to production. Its listed torque range equals approximately 0.3–3 ft-lbs, making it suitable for small fastener applications where over-tightening can damage assemblies and under-tightening can affect product quality.

A torque analyzer is a measurement device used to confirm tool output against a known reference. In assembly environments, the CTA0414 supports routine tool checks, quality audits, and maintenance verification for torque-controlled processes. The Cleco catalog also lists the CST6838 68 Nm stationary transducer for use on the CTA0414 or CTA3038, allowing teams to build a compatible analyzer and transducer setup when their testing process requires it.

Type: Torque Analyzer | Model: CTA0414 | Torque Range: 0.4–4 Nm | Approx. Torque Range: 0.3–3 ft-lbs

Features:

• Torque analyzer for low-range torque verification and tool checking.
• 0.4–4 Nm measurement range supports small fastener and light assembly torque applications.
• Useful for checking torque tools before production use, after service, or during routine quality audits.
• Supports bench-style verification workflows in tool rooms, calibration areas, and assembly support stations.
• Listed with Cleco torque analyzer accessories, including the CST6838 stationary transducer for compatible setups.

Made in USA:

Applications:

• Electronics and light assembly torque checks where small fasteners require controlled tightening.
• Quality assurance stations verifying torque tool output before release to production.
• Tool crib and maintenance departments checking torque tools after adjustment, repair, or scheduled inspection.
• Manufacturing process support where repeatable torque verification helps maintain fastening consistency.

FAQs:

• Q: What is the torque range of the Cleco CTA0414?
  A: The CTA0414 is listed with a 0.4–4 Nm torque range, which is approximately 0.3–3 ft-lbs.
• Q: What is a torque analyzer used for?
  A: A torque analyzer checks the output of torque tools against a measurement reference. It helps confirm that tools are applying torque within the expected range before they are used on production parts.
• Q: Is the CTA0414 the right analyzer for 50 ft-lbs testing?
  A: The CTA0414 analyzer itself is listed at 0.4–4 Nm. The separate CST6838 stationary transducer is listed at 68 Nm / approximately 50 ft-lbs for use on the CTA0414 or CTA3038, so the complete test setup should be confirmed before ordering.
• Q: Does this include a stationary transducer or joint kit?
  A: The source catalog lists the CST6838 stationary transducer and CJK38 dynamic joint kit as separate model numbers. Do not assume either item is included with the CTA0414 unless confirmed on the quote or product listing.

Looking for more information about Cleco Cordless Tool Accessory? Click here to view the Catalog.

Need help selecting the correct Cleco Cordless Tool Accessories for your application? Please call (800) 608-5210 or email info@intlairtool.com